37.040.25 射线照相胶片 标准查询与下载
共找到 185 条与 射线照相胶片 相关的标准，共 13 页
This part of ISO 11699 describes a procedure for the control of film processing systems.
Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values
- ICS
- 37.040.25
- CCS
- 发布
- 2012-01-22
- 实施
- 2012-01-22
The purpose of ISO 11699-1 is to establish the performance of film systems.ISO 11699-1 is applicable for the classification of film systems in combination with specified lead screens for industrial radiography (non-destructive testing). ISO 11699-1 is intended to ensure that the image quality of radiographs - as far as this is influenced by the film system - is in conformity with the requirements of International Standards such as ISO 5579, ISO 17636 and EN 12681.ISO 11699-1:2008 does not apply to the classification of films used with fluorescent intensifying screens. The measurement of film systems in ISO 11699-1:2008 is restricted to a selected radiation
Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
- ICS
- 37.040.25
- CCS
- 发布
- 2012-01-22
- 实施
- 2012-01-22
Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:1998); German version EN ISO 11699-2:2011
- ICS
- 37.040.25
- CCS
- G81
- 发布
- 2012-01
- 实施
Non-destructive testing - Industrial radiographic films - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008); German version EN ISO 11699-1:2011
- ICS
- 37.040.25
- CCS
- G81
- 发布
- 2012-01
- 实施
Cassettes for medical X-ray diagnosis. Radiographic and mammogaphic cassettes
- ICS
- 37.040.25
- CCS
- 发布
- 2012
- 实施
- 2015-01-01
Non-destructive testing. Industrial radiographic film. Classification of film systems for industrial radiography
- ICS
- 37.040.25
- CCS
- G81
- 发布
- 2011-11-30
- 实施
- 2011-11-30
Photography. Intra-oral dental radiographic film and film packets. Manufacturer specifications
- ICS
- 37.040.25
- CCS
- G81
- 发布
- 2011-09-30
- 实施
- 2011-09-30
This International Standard establishes a system for the classification of intra-oral radiographic film by the speed of the film/process system and by the size of the film. It specifies the sensitometric characteristics of the film/process systems, the physical characteristics of the film and packets, and it describes packaging and labelling requirements. This International Standard is applicable to intra-oral dental radiographic film for manual or automatic processing. It does not apply to films intended to be exposed with fluorescent intensifying screens, or films intended to be viewed primarily by reflected light.
Photography - Intra-oral dental radiographic film and film packets - Manufacturer specifications
- ICS
- 37.040.25
- CCS
- G81
- 发布
- 2011-09
- 实施
The purpose of this part of ISO 11699 is to establish the performance of film systems.
Non-destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography (ISO 11699-1:2008)
- ICS
- 37.040.25
- CCS
- 发布
- 2011
- 实施
Photography. Intra-oral dental radiographic film. Technical requirements
- ICS
- 37.040.25
- CCS
- 发布
- 2011
- 实施
- 2013-01-01
This part of ISO 11699 describes a procedure for the control of film processing systems.
Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:1998)
- ICS
- 37.040.25
- CCS
- 发布
- 2011
- 实施
Sensitometry of screen/film systems for medical radiography. Part 1. Determination of sensitometric curve shape, speed and average gradient
- ICS
- 37.040.25
- CCS
- 发布
- 2011
- 实施
- 2013-01-01
Photography. Medical radiographic cassettes/screens/films and hard-copy imaging films. Dimensions and technical requirements
- ICS
- 37.040.25
- CCS
- 发布
- 2011
- 实施
- 2013-01-01
5.1 The only truly valid image quality indicator is a material or component, equivalent to the part being neutron radiographed, with a known standard discontinuity, inclusion, omission or flaw (reference standard comparison part). The SI is designed to substitute for the reference standard, providing qualitative information on hole and gap sensitivity in a single unit. Fabrication in accordance with this practice is vital for accurate and consistent measurements. 5.2 This practice shall be followed for the fabrication of all SIs to be used with Method E545 to determine image quality in direct thermal neutron radiography. 1.1 This practice covers the fabrication of Sensitivity Indicators (SI), which can be used to determine the relative quality of radiographic images produced by direct, thermal neutron radiographic examination. 1.2 The values stated in inch-pound units are regarded to be standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators
- ICS
- 37.040.25
- CCS
- 发布
- 2010
- 实施
5.1 The BPI is designed to yield quantitative information concerning neutron beam and image system parameters that contribute to film exposure and, thereby, affect overall image quality. For proper measurements of film exposure due to the neutron beam constituents, the BPI must be fabricated in accordance with this practice. 5.2 This practice shall be followed for the fabrication of all Beam Purity Indicators to be used with Method E545 to determine image quality in direct thermal neutron radiography. 1.1 This practice covers the material and fabrication of a Beam Purity Indicator (BPI), which can be used to determine the relative quality of radiographic images produced by direct, thermal neutron radiographic examination. 1.2 The values stated in SI units are regarded to be standard. 1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
- ICS
- 37.040.25
- CCS
- 发布
- 2010
- 实施
The only truly valid image quality indicator is a material or component, equivalent to the part being neutron radiographed, with a known standard discontinuity, inclusion, omission or flaw (reference standard comparison part). The SI is designed to substitute for the reference standard, providing qualitative information on hole and gap sensitivity in a single unit. Fabrication in accordance with this practice is vital for accurate and consistent measurements. This practice shall be followed for the fabrication of all SIs to be used with Method E545 to determine image quality in direct thermal neutron radiography.1.1 This practice covers the fabrication of Sensitivity Indicators (SI), which can be used to determine the relative quality of radiographic images produced by direct, thermal neutron radiographic examination. 1.2 The values stated in inch-pound units are regarded to be standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators
- ICS
- 37.040.25
- CCS
- N46
- 发布
- 2010
- 实施
The BPI is designed to yield quantitative information concerning neutron beam and image system parameters that contribute to film exposure and, thereby, affect overall image quality. For proper measurements of film exposure due to the neutron beam constituents, the BPI must be fabricated in accordance with this practice. This practice shall be followed for the fabrication of all Beam Purity Indicators to be used with Method E545 to determine image quality in direct thermal neutron radiography.1.1 This practice covers the material and fabrication of a Beam Purity Indicator (BPI), which can be used to determine the relative quality of radiographic images produced by direct, thermal neutron radiographic examination. 1.2 The values stated in SI units are regarded to be standard. 1.3 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators
- ICS
- 37.040.25
- CCS
- N46
- 发布
- 2010
- 实施
Sensitometry of screen/film systems for medical radiography. Part 3. Determination of sensitometric curve shape, speed and average gradient for mammographiy
- ICS
- 37.040.25
- CCS
- 发布
- 2009
- 实施
- 2010-07-01
이 표준은 필름의 속도/현상 시스템의 감도에 의한, 그리고 필름 크기에 의한 구내 방사선
Photography-Intra-oral dental radiographic film-Specification
- ICS
- 37.040.25
- CCS
- G81
- 发布
- 2008-09-30
- 实施
- 2008-09-30
Photography－Intra-oral dental radiographic film－Specification
- ICS
- 37.040.25
- CCS
- 发布
- 2008-09-30
- 实施
