37.100.10 标准查询与下载

ISO/IEC 29183:2010 信息技术.公设备.测定单独的单面原稿数字复印生产率的方法

This International Standard specifies a method for measuring productivity of digital copying devices and multifunctional devices with various copying modes and a single one-sided original. It is applicable to digital copying devices and multifunctional devices. It is intended to be used for black-and-white and colour digital copying devices and multifunctional devices of any underlying marking technology. This International Standard includes instructions for the creation of test charts, test setup procedure, test procedure, and the reporting requirements for the digital copying productivity measurements. This International Standard is not intended to replace manufacturer's rated speeds.

Information technology - Office equipment - Method for measuring digital copying productivity of a single one-sided original

ISO 12643-2:2010 图形技术.图形技术设备和系统的安全性要求.第2部分:印前和印刷设备与系统

This part of ISO 12643 provides safety requirements specific to prepress and press equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1. This part of ISO 12643 provides additional safety requirements for the design and construction of new prepress and press equipment, and the auxiliary equipment integrated into the press control system.

Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Prepress and press equipment and systems

ISO 12643-3:2010 图形技术.图形技术设备和系统的安全性要求.第3部分:装订和精整设备和系统

This part of ISO 12643 provides safety requirements specific to binding and finishing equipment and systems. It is intended to be used in conjunction with the general requirements given in ISO 12643-1. This part of ISO 12643 provides additional safety requirements for the design and construction of new equipment used to convert printed or blank substrates into cut, folded, collated, assembled, bound, or otherwise finished product. It can also be applicable to processes for preparing substrate for the printing process. It is applicable to a wide range of equipment used in the binding and finishing process.

Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems

KS X ISO/IEC 24735-2010(2020) 信息技术 办公设备 数字式复印机复印生产力的测量方法

Information technology－Office equipment－Method for measuring digital copying productivity

KS X ISO/IEC 24734-2010(2020) 信息技术办公设备数字印刷生产率测量方法

Information technology－Office equipment－Method for measuring digital printing productivity

KS X ISO/IEC 19799-2010(2020) 信息技术印刷页光泽度均匀性测量方法

Information technology－Method of measuring gloss uniformity on printed pages

ISO 12643-5:2010 图形技术——图形技术设备和系统的安全要求第5部分:独立压印机

This part of ISO 12643 provides safety requirements specific to stand-alone platen presses. It is intended to be used in conjunction with the general requirements given in ISO 12643-1. This part of ISO 12643 provides additional press design safety requirements for the design and construction of new manually fed or automatic stand-alone platen press systems intended for die-cutting, creasing, embossing, foil stamping and/or the printing of paper, board and other materials processed in a similar manner. This part of ISO 12643 is not applicable to presses designed to handle metal material other than foil.

Graphic technology — Safety requirements for graphic technology equipment and systems — Part 5: Stand-alone platen presses

EN 1010-1:2004+A1:2010 照护人员的机械设计和施工的安全要求印刷和纸转换机器-第1部分:通用要求 包含修改件A1,2010

1.1 This document applies to: - printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines. This standard also covers machinery used for the handling of paper, products, printing formes and inks (before and after the printing process) as well as machinery for cleaning printing formes and checking the print quality (auxiliary printing machinery). - paper converting machines, i. e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner. NOTE Similar substrates are, for example, board, corrugated board, plastic film, aluminium foil, sheet metal and photographic paper. 1.2 This document deals with all common significant hazards relevant to printing and paper converting machinery when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). 1.3 This document is not applicable to printing and paper converting machines which are manufactured before the date of publication of this document by CEN. 1.4 This document does not apply to: - winder-slitters and sheeters in paper finishing (sheeters with unwinders) (see EN 1034-1:2000, EN 1034-3:2000, EN 1034-5:2005); - office-type collating machines equipped with friction feeders; - mail processing machines; - machines used for filling packages (such as machines for shaping, filling, and closing the package); - textile printing presses.

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements

GSO ISO 4232-2:2010 办公机器 规格表中包含的最少信息 第2部分：复印机文档

This International Standard specifies the minimum information that shall be included in the specification sheets of document copying machines so that users may compare directly the characteristics of different machines. lt does not apply to microcopying equipment.

Office machines - Minimum information to be included in specifications sheets - Part 2 : Document copying machines

GSO ISO 4232-1:2010 复印机 规格表中包含的最少信息量

This international Standard specifies the minimum information that shall be included in the specification sheets of duplicators so that users may compare directly the characteristics of different machines. 2

Duplicators - Minimum information to be included in specification sheets

GSO ISO/IEC 24734:2010 信息技术 办公设备 测量数字印刷生产率的方法

This International Standard specifies a method for measuring the productivity of digital printing devices with various office applications and print job characteristics. This International Standard is applicable to digital printing devices, including single-function and multi-function devices, regardless of print technology (e.g. inkjet, laser). Devices can be equipped with a range of paper feed and finishing options either directly connected to the computer system or via a network. It is intended to be used for black and white (B&W) as well as colour digital printing devices. It allows for the comparison of the productivity of machines operating in various available modes (simplex, duplex, size of substrates, etc.) and office applications when the test system environment, operating modes, and job mix for each machine are held identical. This International Standard includes test files, test setup procedure, test runtime procedure, and the reporting requirements for the digital printing productivity measurements. This International Standard is not intended to be used for devices which are not able to print on a media size of A4/8.5”x11” or for devices, which are not able to collate multiple copies of a print. This International Standard is not intended to replace manufacturer's rated speeds. The productivity of a digital printing device depends on factors other than the printing device itself. These include, but are not limited to, computer manufacturer and model, central processor type and speed, RAM and hard disk memory capacity and speed, software driver, version of the application being used, operating system, and the type and speed of the communication path from computer to printing device, etc. Because of this, in order to make useful and accurate direct comparisons of printing productivity with this International Standard, the same computer system hardware and software shall be used for measuring the printing devices if for the purpose of being directly compared one to another. For every printing productivity measurement, the basic specifications of the computer hardware and software shall be included with the results of the printing productivity measurement. NOTE Important note for the use of this International Standard. There are other factors that influence the number of prints that a person can make on a printing device within a defined time period. These factors include typical job portfolio that is printed on a particular printing device, reliability of the system, downtime due to a service call, ease-of-use, (un)load paper during printing, routine maintenance, interaction with other users of the printing device and the network, etc. Such productivity items are not taken into account within the scope or methods of this International Standard.

Information technology — Office equipment — Method for measuring digital printing productivity

GSO ISO/IEC 24735:2010 信息技术 办公设备 衡量数字复印生产力的方法

ISO/IEC 24735:2009 provides a method for measuring digital copying productivity of digital copying devices and multifunctional devices with various copying modes. It is applicable to digital copying devices and multifunctional devices equipped with automatic document feeder and collating function. It is intended to be used for black and white (B&W) as well as colour digital copying devices and multifunctional devices of any underlying marking technology. It allows comparison of the throughput copying rates for a machine operated in various available operating modes (simplex, duplex, size of substrates, 2-up, etc) and various available digital image processing configurations. ISO/IEC 24735:2009 includes test files, test setup procedure, test procedure, and the reporting requirements for the digital copying productivity measurements

Information technology — Office equipment — Method for measuring digital copying productivity

DS/EN 1010-2+A1:2010 机械安全 印刷和纸张加工机械设计和制造的安全要求 第2部分：印刷和上光机械，包括印前机械

This document applies to:- Pre-press machinery (machinery and devices for the production of master copies and printing forms):- exposure equipment for the production of films and printing forms;- equipment for developing films and printing forms;- washing machines for printing forms;- machines for bending printing forms;- punching machines for film and printing forms;- cutting machines for film and printing forms;- machines for the production of gravure printing forms;- scanners.- Printing and varnishing machines:- proofing presses;- sheet-fed printing presses and varnishing machines including digital printing presses;- web-fed rotary presses and varnishing

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery

EN 1010-2:2006+A1:2010 机械安全性.印刷机和换纸机的设计和建造的安全要求.第2部分:包括预压机械的印刷机和涂漆机 包含修改件A1,2010

This document applies to: - Pre-press machinery (machinery and devices for the production of master copies and printing forms): - exposure equipment for the production of films and printing forms; - equipment for developing films and printing forms; - washing machines for printing forms; - machines for bending printing forms; - punching machines for film and printing forms; - cutting machines for film and printing forms; - machines for the production of gravure printing forms; - scanners. - Printing and varnishing machines: - proofing presses; - sheet-fed printing presses and varnishing machines including digital printing presses; - web-fed rotary presses and varnishing machines including digital printing presses; - screen printing presses. - Auxiliary devices: - cylinder and roller washing devices; - continuous flow drying devices; - powder spraying devices; - auxiliary devices on inking and damping units; - automatic plate clamping devices; - washing equipment for printing forms, rollers and scrapers; - pile turners; - measuring and control devices. This document shall be used together with !EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to printing and varnishing machines including pre-press machinery and auxiliary devices, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements specified in prEN 1010-2 take precedence over respecti¬ve requirements in this standard. This document does not deal with risks generated by noise emitted from the machines. These issues are fundamentally covered in EN 1010-1:2004+A1. This document does not apply to high-pressure cleaning devices and screen printing presses for textile substrates. This document is not applicable to printing and varnishing machines including pre-press machinery which are manufactured before the date of publication of this document by CEN.

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing and varnishing machines including pre-press machinery

DD ISO/TS 10128:2009 图形技术 调整印刷系统色彩再现以匹配一组特征数据的方法

1   Scope This Technical Specification specifies three methods for the adjustment of the digital content data that is input to a printing system to achieve consistency in the printed results among a number of presses printing to the same general aim conditions. These three methods are generally identified as a) the matching of tone value curves, b) the use of near-neutral scales, and c) the use of CMYK to CMYK multi-dimensional transforms. The procedures for establishing the aim condition for the necessary transfer curves, the procedures for determining the individual transfer curves, and a comparison of the applicability of these three methods are included. These adjustment procedures are applicable to printing systems that use CMYK colourants but are not restricted to those that use traditional ink on paper printing but can involve other marking technologies such as those used for proofing and/or digital printing .

Graphic technology. Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data

BS DD ISO/TS 10128:2010 图形技术.与一套个性化数据匹配的打印系统颜色再现的调整方法

Graphic technology - Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data

BS ISO 12643-1:2009 印刷技术.印刷技术设备和系统的安全性要求.一般要求

Graphic technology - Safety requirements for graphic technology equipment and systems - General requirements

EN 1010-1:2010 照护人员的机械设计和施工的安全要求印刷和纸转换机器-第1部分:通用要求包含修正案A1:2010

This document applies to: printing machines for printing on paper and similar materials, including screen printing presses; equipment used in the preparation of the printing process and additional equipment on printing machines are also considered to be printing machines.This standard also covers machinery used for the handling of paper, products, printing formes and inks (before and after the printing process) as well as machinery for cleaning printing formes and checking the print quality (auxiliary printing machinery). paper converting machines, i. e. machines to process, convert or finish paper, board and similar materials which are processed, converted or finished in a similar manner. NOTE Similar substrates are, for example, board, corrugated board, plastic film, aluminium foil, sheet metal and photographic paper.This document deals with all common significant hazards relevant to printing and paper converting machinery when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4).This document is not applicable to printing and paper converting machines which are manufactured before the date of publication of this document by CEN.This document does not apply to: winder-slitters and sheeters in paper finishing (sheeters with unwinders) (see EN 1034-1:2000, EN 1034-3:2000, EN 1034-5:2005); office-type collating machines equipped with friction feeders; mail processing machines; machines used for filling packages (such as machines for shaping, filling, and closing the package); textile printing presses.

Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements (Incorporates Amendment A1: 2010)

BS ISO 12643-4:2010 印刷技术.印刷技术设备和系统的安全要求.转换设备和系统

Graphic technology - Safety requirements for graphic technology equipment and systems - Converting equipment and systems

JIS B 9631-1:2010 印刷技术.印刷技术设备和系统的安全要求.第1部分:一般要求

Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 1: General requirements