37.100.10 标准查询与下载
共找到 739 条与 相关的标准，共 50 页
1.1 This European Standard applies to cutting machines used in paper converting: - guillotines; - three-knife trimmers; - index cutting machines; - trimmers; - rotary cutters; - round cornering machines; - label punching machines. This European Standard is only applicable in conjunction with !EN 1010-1:2004+A1". Both parts together identify all significant hazards relevant to the cutting machines when they are used as intended and under the conditions foreseen by the manufacturer (see Clause 4). The specific requirements of this European Standard take precedence over respective requirements of !EN 1010-1:2004+A1". This European Standard is not applicable to cutting machines manufactured before the publication of this European Standard by CEN. 1.2 This standard does not apply to winder-slitters or sheeters (see EN 1034-1, EN 1034-3, prEN 1034-5).
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 3: Cutting machines
- ICS
- 37.100.10
- CCS
- 发布
- 2009-10-14
- 实施
- 2010-01-31
This document applies to - bookbinding machines: - stitching, riveting, eyeletting and attaching machines; - gang stitchers; - gathering machines; - perfect binders; - paper drills; - book signature presses; - book presses; - sheet folding machines; - book production lines for the production of books with hard covers; - back rounding and pressing machines; - backlining and head banding machines; - casing-in machines; - book cover crease forming machines. - paper converting machines: - machines for the production of envelopes; - machines for the production of sanitary items; - inserting machines; - counter-stackers; - paper embossing machines. - paper finishing machines: - coaters; - laminators. This document shall be used together with EN 1010-1:2004+A1. Both parts together identify all significant hazards relevant to bookbinding, paper converting and paper finishing machines when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). The specific requirements in EN 1010 4 take precedence over respective requirements in EN 1010-1:2004+A1. This document does not deal with risks generated by noise emitted from the machines. These issues are covered basically in EN 1010-1:2004+A1. However, for machines like sheet folding machines and machines for the production of envelopes and sanitary items, some specific proposals for noise reduction measures are given. This document is not applicable to bookbinding, paper converting and finishing machines manufactured before the date of publication of this document by CEN.
Safety of machinery - Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines
- ICS
- 37.100.10
- CCS
- 发布
- 2009-10-14
- 实施
- 2010-01-31
1.1 GeneralThis CWA specifies requirements for a security management system where an organization:a. Needs to demonstrate its ability to consistently provide products that meets security requirements set by law and regulations, requirements from the Security Printing Industry and customers, and provisions of the risk inventory.b. Aims to enhance customer satisfaction through the effective application of the Security Management system, including processes for continual improvement of the system and the conformity to security requirements set by law and regulations, requirements from the Security Printing Industry and customers, and results of the risk invent
Security Management System for Security Printing
- ICS
- 37.100.10
- CCS
- 发布
- 2009-10-12
- 实施
- 2009-10-12
Graphic technology - Methods of adjustment of the colour reproduction of a printing system to match a set of characterization data
- ICS
- 37.100.10
- CCS
- A17
- 发布
- 2009-07
- 实施
Information technology — Office equipment — Method for measuring digital copying productivity — Technical Corrigendum 1
- ICS
- 37.100.10
- CCS
- 发布
- 2009-06-17
- 实施
Determination of the emission of formaldehyde and volatile organic compounds from furniture and buil
- ICS
- 37.100.10
- CCS
- 发布
- 2009-05-11
- 实施
이 표준은 주거용 및 사무용 건물과 학교 등의 일반적인 환경에서 사용되는 가구, 사무기기,
Determination of the emission of formaldehyde and volatile organic compounds from furniture and buil
- ICS
- 37.100.10
- CCS
- Z11
- 发布
- 2009-05-11
- 实施
- 2009-05-11
This International Standard specifies a method for measuring the productivity of digital printing devices with various office applications and print job characteristics. This International Standard is applicable to digital printing devices, including single-function and multi-function devices, regardless of print technology (e.g. inkjet, laser). Devices can be equipped with a range of paper feed and finishing options either directly connected to the computer system or via a network. It is intended to be used for black and white (B&W) as well as colour digital printing devices. It allows for the comparison of the productivity of machines operating in various
Information technology - Office equipment - Method for measuring digital printing productivity
- ICS
- 37.100.10
- CCS
- 发布
- 2009-04-03
- 实施
- 2009-04-03
This International Standard specifies a method for measuring “productivity” of digital copying devices and multifunctional devices with various copying modes. The International Standard is applicable to digital copying devices and multifunctional devices equipped with automatic document feeder and collating function. The International Standard is intended to be used for black and white (B&W) as well as colour digital copying devices and multifunctional devices of any underlying marking technology. The International Standard allows comparison of the throughput copying rates for a machine operated in various available operating modes (simplex, duplex, size of substrates, 2-up, etc) and various available digital image processing configurations. This International Standard includes test files, test setup procedure, test procedure, and the reporting requirements for the digital copying productivity measurements. This International Standard is not intended to be used for devices which are not able to copy on a media size of A4/8.5"x11", devices that do not have an ADF (automatic document feeder), or devices which are not able to collate multiple copies of original prints from a test set. This International Standard is not intended to replace manufacturer's rated speeds.
Information technology - Office equipment - Method for measuring digital copying productivity
- ICS
- 37.100.10
- CCS
- Y54
- 发布
- 2009-03
- 实施
This International Standard specifies a method for measuring the productivity of digital printing devices with various office applications and print job characteristics. This International Standard is applicable to digital printing devices, including single-function and multi-function devices, regardless of print technology (e.g. inkjet, laser). Devices can be equipped with a range of paper feed and finishing options either directly connected to the computer system or via a network. It is intended to be used for black and white (B&W) as well as colour digital printing devices. It allows for the comparison of the productivity of machines operating in various available modes (simplex, duplex, size of substrates, etc.) and office applications when the test system environment, operating modes, and job mix for each machine are held identical. This International Standard includes test files, test setup procedure, test runtime procedure, and the reporting requirements for the digital printing productivity measurements. This International Standard is not intended to be used for devices which are not able to print on a media size of A4/8.5”x11” or for devices, which are not able to collate multiple copies of a print. This International Standard is not intended to replace manufacturer's rated speeds. The productivity of a digital printing device depends on factors other than the printing device itself. These include, but are not limited to, computer manufacturer and model, central processor type and speed, RAM and hard disk memory capacity and speed, software driver, version of the application being used, operating system, and the type and speed of the communication path from computer to printing device, etc. Because of this, in order to make useful and accurate direct comparisons of printing productivity with this International Standard, the same computer system hardware and software shall be used for measuring the printing devices if for the purpose of being directly compared one to another. For every printing productivity measurement, the basic specifications of the computer hardware and software shall be included with the results of the printing productivity measurement. NOTE Important note for the use of this International Standard. There are other factors that influence the number of prints that a person can make on a printing device within a defined time period. These factors include typical job portfolio that is printed on a particular printing device, reliability of the system, downtime due to a service call, ease-of-use, (un)load paper during printing, routine maintenance, interaction with other users of the printing device and the network, etc. Such productivity items are not taken into account within the scope or methods of this International Standard.
Information technology - Office equipment - Method for measuring digital printing productivity
- ICS
- 37.100.10
- CCS
- Y54
- 发布
- 2009-03
- 实施
ISO/IEC 24734:2009 provides a method for measuring the productivity of digital printing devices with various office applications and print job characteristics. It is applicable to digital printing devices, including single function printing and multi-function devices, regardless of print technology (e.g. inkjet, laser). Devices can be equipped with a range of paper feed and finishing options either directly connected to the computer system or via a network. It is intended to be used for black and white (B&W) as well as colour digital printing devices.
Information technology - Office equipment - Method for measuring digital printing productivity
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2009
- 实施
5.1 Abrasion resistance during transport and storage is essential to prevent marring of type matter, designs, or protective coatings on the exterior of labels and other printed materials. Recognizing that the actual amount of abrasion occurring in the field depends on relative humidity, temperature, tightness of packing, and a host of other variables, this test method provides a rapid means for comparing the abrasion resistance of test surfaces under laboratory conditions. It is useful for specification acceptance between the supplier and the customer. 5.2 This test method can also be used to evaluate the relative abrasion resistance of printed inks, varnishes, laminates and substrates, and the abrasiveness of inks. 1.1 This test method covers the procedure for determining the abrasion resistance of printed matter using a GA-CAT Comprehensive Abrasion Tester. 1.2 This test method is applicable to packaging labels, book, catalog, and magazine covers, bar codes, corrugated boxes, and other containers having applied graphics on any flat substrate. It is not recommended for powder coatings. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
- ICS
- 37.100.10
- CCS
- A17
- 发布
- 2009
- 实施
Graphic technology - Plates for offset printing - Dimensions
- ICS
- 37.100.10
- CCS
- A17
- 发布
- 2008-12
- 实施
Limits to the evaluation of ink cartridge page yield for ink-containing cartridges for colour inkjet printers. Applies to printer component of any multifunctional device that has a digital input printing path, including multifunction devices that contai
Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- Y54
- 发布
- 2008-11-21
- 实施
This Japanese Industrial Standard specifies the standard specification form for digital duplicators, the entry procedures into it and the testing procedures of the items to be filled in so as to enable comparison of performance of different types of digital duplicators, for the purpose of facilitating selection of a digital duplicator to suit users' own requirements. This Standard applies to full automatic duplicators of stencil printing type with dig- ital master-making function for use in schools, public offices and general office envi- ronments.
Standard specification form for digital duplicator and related testing procedure
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2008-10-20
- 实施
- 2008-10-20
この規格は.カラー電子写真式プリンタ用の，トナーを収容するカートリッジ（オールインワンタイブ のトナーカートリッジ及び感光体を含まないトナーカートリッジ)の印刷可能枚数の瀧方法，決定方法及び表記方法につし，て規定する。この規格は，コンピュー夕からのデジタルプリント信号が入力できる多 機能な電子写真式プリンタ複合機。すなわち，印刷機能をもつ複合機器にも適用可能である。
Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2008-09-20
- 实施
この規格は，カラーインクジュットプリンタ用のインクが入っているインクカートリッジ(プリントへッドー体形ィンクカートリッジ及びプリントへッド分離形ィンクカートリッジ)の印刷可能枚数の測定方法を規定する。また，この規格はコンピュータからのデジタルプリント信号が入力できる多機能デバイス，すなわちインクジェットプリンタ機能をもっ複合機にも適用することができる。さらに，この規格は液体インク及び固体ィンクの両方に適用することができる。
Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2008-09-20
- 实施
この規格は，カートリッジの印刷可能枚数測定用の標準テストべージセットを規定する。標準テストべージセットは。4種類の事務用の印刷物である実用ページ，及びインクカートリッジ又はトナーカートリッジの寿命判定用の診断ページ1種類で構成する。これらのテストべージは，電子写真方式，及びインクジェット方式のプリンタ又はデジタルプリント信号が入力できる多機能印字装霞けなわち，デジ夕ル印刷機能をもつ複合機器)に用いることができる。また，この規格は，カラートナーカートリッジ及びカラーインクカートリッジの印刷可能枚数測定試験に使用するための標準テストページセットを共通ファイルフオーマットで規定することを目的とLている。
Colour test pages for measurement of office equipment consumable yield
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2008-09-20
- 实施
本标准规定了印刷机械覆面机的定义、型式和基本参数、要求、试验方法、检验规则、标志、包装、 运输和贮存。 本标准适用于以纸张作为面层材料，以纸张或单张瓦楞纸板、纸板及类似材料作为底层材料的覆面机。
Printing machinery.Paper laminator
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2008-06-04
- 实施
- 2008-11-01
本标准规定了小型单张纸平版印刷机的型式及基本参数、要求、试验方法、检验规则与标志、包装贮存与运输。 本标准适用于尺寸小于GB/T 15467规定的P64（四开640mm×460mm）的单张纸平版印刷机（以下简称印刷机）。 本标准不适用于办公机械小胶印机。
Printing machinery.Small sheet-fed lithographic press
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2008-06-04
- 实施
- 2008-11-01
