37.100.10 标准查询与下载
共找到 739 条与 相关的标准，共 50 页
本标准规定了预制感光板冲版机的产品型号名称、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于铝版基预制感光版卧式冲版机（以下简称冲版机）。
Printing machinery.Presensitzed plate processor
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2008-06-04
- 实施
- 2008-11-01
本标准规定了预制感光板晒版机的型式、型号和命名、要求、试验方法、检验规则和标志、包装、运输和贮存。 本标准适用于能够连续完成抽真空、曝光、放气全过程的预制感光板晒版机（以下简称晒版机），不适用于连续晒版机。
Printing machinery.Presensitized plate printing-down machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2008-06-04
- 实施
- 2008-11-01
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 3: Binding and finishing equipment and systems
- ICS
- 37.100.10
- CCS
- L81;A17
- 发布
- 2008-03-01
- 实施
本标准规定了单张纸双面平版印刷机(以下简称印刷机)的术语和定义、基本参数、技术要求、试验方法、检验规则与标志、包装、贮存与运输。 本标准适用于一次走纸完成双面印刷的单张纸平版印刷机。
Sheet-fed offest perfector
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2008-02-01
- 实施
- 2008-07-01
JB/T 9124的本部分规定了曲面式平型网版印刷机的型式与基本参数、要求、试验方法、检验规则及标志、包装、运输、贮存。 本部分适用于承印物为圆柱、圆锥、圆弧面等的手动型及半自动型曲面式平型网版印刷机。
Planographic screen-process press.Part 3:Cylindrical planographic screen-process press
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2008-02-01
- 实施
- 2008-07-01
本标准规定了印刷机械卷筒料装饰纸凹版印刷机(以下简称凹印机)的型式、基本参数、型号和名称、要求、试验方法、检验规则、标志、使用说明、包装、运输和贮存。 本标准适用于卷筒料装饰纸机组式凹版印刷机。
Printing machinery.Reel decorate paper gravure press
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2008-02-01
- 实施
- 2008-07-01
The Atlantek test system allows simulation of direct thermal printers in the marketplace. Thus, this system is useful in matching direct thermal product performance to various printer configurations. This test system is useful for new product development. Direct thermal printer manufacturers can design print control algorithms to match particular thermal imaging products. Thermal imaging product manufacturers can formulate and design products (media) to provide a match with certain printer designs. Manufacturing process control can make thermal response comparisons relative to process changes. Customers for thermal products can use this test method to compare supplies from various manufacturers. The test system can be used to evaluate thermal response of facsimile, label, medical recorder, plotter, and other direct thermal products (media). Performance differences between printheads and media combinations can be measured and presented graphically. 1.1 This test method covers the measurement of thermal response of various direct thermal imaging papers or other thermal-coated substrates used for facsimile, labels, medical recorders, plotters, and printers. 1.2 The Atlantek Thermal Response Tester Model 200 described in this test method may be used for specification acceptance, product development, and research applications. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 8.
Standard Test Method for Determining the Dynamic Thermal Response of Direct Thermal Imaging Products—Atlantek Method
- ICS
- 37.100.10
- CCS
- 发布
- 2008-01-01
- 实施
ISO/IEC 24711:2007 defines a method for testing and calculation of average yield measured in the number of standard pages for a colour inkjet cartridge and a specific printer printing in a semi-continuous mode under a defined set of conditions. It uses the test page suite defined in ISO/IEC 24712. ISO/IEC 24711:2007 can also be applied to the printer component of any multifunctional device that has a digital input-printing path (i.e. multi-function devices that contain printer components). ISO/IEC 24711 is only intended for the measurement of colour inkjet cartridge yield. No other claims can be made from this testing regarding quality, reliability, etc.
Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2008-01-01
- 实施
ISO/IEC 19752:2004 is limited to evaluation of toner cartridge yield for toner containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for monochrome electrophotographic printers. ISO/IEC 19752:2004 can also be applied to the printer component of any multifunctional device that has a digital input-printing path (i.e. multi-function devices that contain printer components).
Information technology - Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that may contain printer components
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2008-01-01
- 实施
Information technology - Office machines - Method of specifying image reproduction of colour copying machines by analog test charts - Realisation and application - Amendment 1
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2008
- 实施
ISO/IEC 19799:2007 defines methods and processes for measuring objective print quality attributes for the assessment of gloss non-uniformity on printed pages in reflection mode, and provides transforms, when applicable, that relate the objective results to subjective responses if appropriate. The gloss uniformity attributes included in ISO/IEC 19799:2007 are differential gloss, gloss uniformity within a page, and gloss consistency within a run.
Information technology - Method of measuring gloss uniformity on printed pages
- ICS
- 37.100.10
- CCS
- A17
- 发布
- 2008
- 实施
This International Standard specifies a method for measuring the real output speed or 'productivity' of copying machines. This International Standard is applicable to plain paper copying machines equipped with automatic document feeder or handling capability. This International Standard can be used for such machines run in either simplex or duplex copying modes. It is specifically intended for use with non-digital copiers, generally referred to as light-lens or analog devices. This International Standard allows comparison of the throughput copy rates for a machine operated in its various available duplexing modes
Information technology - Office equipment - Method for measuring copying machine productivity
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2008
- 实施
ISO/IEC 19798:2007 defines a method for testing and calculation of average yield measured in the number of standard pages for a colour toner cartridge and specific printer printing in a semi-continuous mode under a defined set of conditions. It uses the test page suite defined in ISO/IEC 24712. ISO/IEC 19798:2007 can also be applied to the printer component of any multifunctional device that has a digital input-printing path (i.e. multi-function devices that contain printer components). ISO/IEC 19798:2007 is only intended for the measurement of colour toner cartridge yield. No other claims can be made from this testing regarding quality, reliability, etc.
Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- A17
- 发布
- 2008
- 实施
ISO/IEC 24712:2007 defines colour test pages for the measurement of consumable yield. The test page suite includes four "customer" type documents and one "diagnostic" page that is used to determine end of ink or toner consumable life. These pages can be used for electro-photographic, inkjet printers and multi-function devices that have a digital printing path, i.e. an all-in-one electro-photographic machine that has digital printing capabilities.
Colour test pages for measurement of office equipment consumable yield
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2008
- 实施
This International Standard applies to implementation and application of test charts for colour copying machines. This International Standard serves for testing of reproduction properties of colour copying machines, in order to help to recognize the possibilities and limits of various machines and for their comparison.
Information technology - Office machines - Method of specifying image reproduction of colour copying machines by analog test charts - Realisation and application
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2008
- 实施
The scope of this International Standard is to define colour test pages for the measurement of consumable yield. The test page suite includes four “customer” type documents and one “diagnostic” page that is used to determine end of ink or toner consumable life. These pages can be used for electro-photographic, inkjet printers and multi-function devices that have a digital printing path, i.e. an all-in-one electro-photographic machine that has digital printing capabilities. This International Standard provides a set of test pages in a common file format that would be used in the testing of consumable yield. The procedure for using these pages is detailed in ISO/IEC 19798 and ISO/IEC 24711. These pages are intended to represent some of the types of documents that are used in the office and home. They are not intended to represent special applications such as photo printing.
Colour test pages for measurement of office equipment consumable yield
- ICS
- 37.100.10
- CCS
- A17;Y32
- 发布
- 2007-12
- 实施
The scope of this International Standard is limited to evaluation of ink cartridge page yield for ink-containing cartridges (i.e. integrated ink cartridges and ink cartridges without integrated print heads) for colour inkjet printers. This International Standard can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain inkjet printer components. Both liquid and solid ink products can be tested using this International Standard. This International Standard is only intended for the measurement of ink cartridge page yield when printing on plain paper. No other claims can be made from this testing regarding quality, reliability, etc. This International Standard can be used to measure the yield of any cartridge that is used in a significant amount during the printing of the test suite defined in ISO/IEC 24712. This International Standard is not for use with printers whose minimum printable size is equal to or greater than A3 or for printers designed or configured to print photos (for example, maximum printable size less than A4 or a printer configuration intended for photo-only printing). In addition, it only applies to drop-on-demand printing systems.
Method for the determination of ink cartridge yield for colour inkjet printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- J87;A17
- 发布
- 2007-12
- 实施
The scope of this International Standard is limited to evaluation of toner cartridge page yield for tonercontaining cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for colour electrophotographic printers. This International Standard can also be applied to the printer component of any multifunctional device that has a digital input printing path, including multi-function devices that contain electrophotographic printer components. This International Standard is only intended for the measurement of toner cartridge page yield when printing on plain paper using cyan, magenta, yellow and black toner cartridges. No other claims can be made from this testing regarding quality, reliability, etc. This International Standard is not for use with printers whose minimum printable size is equal to or greater than A3 or for photo-only printers. NOTE Application of this International Standard for yield measurement of toner replenishment systems (i.e. toner cartridge and bottle type systems where the toner reservoir is internal to the printing system and not user-replaceable) requires some procedural modifications specifically noted herein. This International Standard is intended for equipment used in the office space and does not apply to production volume or large format printing machines where the major cost of ownership is not caused by the consumable yield measured in this International Standard.
Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- J87;A17
- 发布
- 2007-12
- 实施
Information technology－Office equipment－Quality and performance of office equipment that contains reused components
- ICS
- 37.100.10
- CCS
- 发布
- 2007-11-30
- 实施
Information technology－Office equipment－Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that may contain printer compone
- ICS
- 37.100.10
- CCS
- 发布
- 2007-11-30
- 实施
