37.100.10 标准查询与下载
共找到 739 条与 相关的标准，共 50 页
Methods of test for electrostatic process copying machines
- ICS
- 37.100.10
- CCS
- 发布
- 2007-10-24
- 实施
Methods of test for electrostatic process copying machines
- ICS
- 37.100.10
- CCS
- 发布
- 2007-10-24
- 实施
Stencils for duplicators－Minimum overprint and attachment features
- ICS
- 37.100.10
- CCS
- 发布
- 2007-10-24
- 实施
Information technology－Office equipment－Minimum information to be included in specification sheets－Copying machines
- ICS
- 37.100.10
- CCS
- 发布
- 2007-10-24
- 实施
Office machines－Minimum information to be included in specifications sheets－Part 2：Document copying machines
- ICS
- 37.100.10
- CCS
- 发布
- 2007-10-24
- 实施
Offset duplicators－Attachment features of plates
- ICS
- 37.100.10
- CCS
- 发布
- 2007-10-24
- 实施
Limited to evaluation and measurement of toner cartridge yield for toner containing cartridges (i.e. all-in-one toner cartridges and toner cartridges without a photoconductor) for monochrome electrophotographic printers. Can be applied to the printer com
Information technology - Method for the determination of toner cartridge yield for monochromatic electrophotographic printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2007-10-12
- 实施
Deals with the colour reproduction properties of office devices, e. g. printers, scanners and monitors, which may depend on the device system, which includes e. g. the device properties and settings, the device driver, the file format, the computer opera
Information technology - Office machines - Machines for colour image reproduction - Method of specifying image reproduction of colour devices by digital and analog test charts
- ICS
- 37.100.10
- CCS
- Y54
- 发布
- 2007-10-12
- 实施
本标准规定了静电复印干式色调剂（以下简称“色调剂”）流动性测定方法，其中包括术语、符号、原理、使用的仪器、测定的环境条件、取样方法、测定步骤、测定结果和报告。 本标准适用于干式双组份色调剂及干式单组份显影剂流动性的测定，不适用于载体流动性测定。
Measurement method of fluidity for toner in dry electrostatics copying
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2007-10-08
- 实施
- 2008-03-01
本标准规定了静电复印干式双组份显影剂用磁性载体的分类、术语和定义、技术要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于磁刷显影、热定影的静电复印机上使用的干式双组份显影剂用磁性载体（简称载体）。 本标准不适用于颗粒尺寸全部或大部分小于 45 μm 的超微载体。
Magnetic carrier for dry Two-component developer for electrostatic copying
- ICS
- 37.100.10
- CCS
- N47
- 发布
- 2007-10-08
- 实施
- 2008-03-01
JB/T 8116的本部分规定了立式平压模切机（以下简称模切机）的型式、基本参数、型号和名称、要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于立式平压模切机，也适用于立式平压烫印模切两用机和立式平压印刷模切两用机的模切压痕部分。
Printing machinery platen cutting and creasing machine.Part 2: Standing-type cutting and creasing machine
- ICS
- 37.100.10
- CCS
- J87
- 发布
- 2007-08-28
- 实施
- 2008-02-01
This part of ISO 12643 provides requirements specific to press equipment and systems. It is used in conjunction with the general requirements given in ISO 12643-1. This part of ISO 12643 provides additional safety requirements for the design and construction of new press equipment and the auxiliary equipment integrated into the press control system.
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 2: Press equipment and systems
- ICS
- 37.100.10
- CCS
- J87;A17
- 发布
- 2007-04-01
- 实施
The scope of this International Standard is to define methods and processes of measuring objective printquality attributes for the assessment of gloss non-uniformity on printed pages in reflection mode, and to provide transforms, when applicable, that relate the objective results to subjective responses, if appropriate. There are many existing standards (see Normative references and Bibliography for details) typically used for gloss measurement. Our intent is to leverage the existing standards and adapt those for use on gloss uniformity measurements where appropriate. This International Standard is composed of a standardized test methodology, which is based on established gloss measurement methodologies as noted in Clause 2 and in the Bibliography. The methodologies have been modified so that, when applied to printed pages created by different marking technologies and imaging algorithms on different substrates, the results indicate the level of the objective gloss uniformity of the printed pages (in reflection mode). If the objective measurement can be linked to the subjective impression of gloss uniformity, then the linkage from objective measurement to subjective impression via mathematical transforms is provided. The reflection prints that are to be used as the subject of these tests can be created via printers or copiers (analog and digital). This International Standard should be applied only to electro-photographic bases prints. When more reflection prints made by other printing technologies become available for follow-up study, one may consider including those printing technologies in this International Standard as a revision. This International Standard does not address the measurement of gloss attributes of printed pages in transmission mode. Gloss uniformity attributes currently included in this International Standard are: differential gloss, gloss uniformity within a page, and gloss consistency within a run. Due to the current level of immaturity of commercially available objective micro-gloss measurement instruments, gloss artefact attributes (such as gloss grain, gloss spot, gloss streak, gloss band, gloss mottle/cloud, gloss moiré) are not included in this International Standard at the present time, since instrumented measurement procedure cannot be recommended at present. As instrumented measurement capability becomes available, they will be considered for adoption into this International Standard as a revision.
Information technology - Method of measuring gloss uniformity on printed pages
- ICS
- 37.100.10
- CCS
- A17
- 发布
- 2007-03-01
- 实施
This part of ISO 12643 provides safety specifications for the design and construction of new machines used in printing press systems and in binding and finishing systems. It includes equipment used in a stand-alone mode, or in combination with other machines, including ancillary equipment, in which all the machine actuators (e.g. drives) of the equipment are controlled by the same control system. The requirements listed in this part of ISO 12643 are applicable to the equipment covered by all parts of ISO 12643, unless otherwise noted. Requirements specific to press and binding and finishing equipment and systems, that are not included in this part of ISO 12643, are given in ISO 12643-2 and ISO 12643-3, respectively. This part of ISO 12643 addresses recognized hazards specific to equipment and systems in the following areas: -- mechanical; -- electrical; -- slipping, tripping, falling; -- ergonomics; -- noise; -- radiation; -- fire and explosion; -- thermal; -- other emissions. It is advisable that technologies not identified in this part of ISO 12643 incorporate the safety principles set forth herein in their design.
Graphic technology - Safety requirements for graphic technology equipment and systems - Part 1: General requirements
- ICS
- 37.100.10
- CCS
- A17
- 发布
- 2007-03-01
- 实施
Colour test pages for measurement of office equipment consumable yield
- ICS
- 37.100.10
- CCS
- 发布
- 2007-01-31
- 实施
- 2007-01-31
Information technology - Method of measuring gloss uniformity on printed pages
- ICS
- 37.100.10
- CCS
- A17
- 发布
- 2007
- 实施
Method for the determination of toner cartridge yield for colour printers and multi-function devices that contain printer components
- ICS
- 37.100.10
- CCS
- 发布
- 2007
- 实施
Graphic technology－Plates for offset printing－Dimensions
- ICS
- 37.100.10
- CCS
- 发布
- 2006-12-29
- 实施
이 규격은 용어를 정의하고, 오프셋 프린팅용 블랭킷에 대한 배열과 라벨링, 특징과 시험 방
Graphic technology－Blankets for offset printing
- ICS
- 37.100.10
- CCS
- A17
- 发布
- 2006-12-29
- 实施
- 2006-12-29
Graphic technology－Blankets for offset printing
- ICS
- 37.100.10
- CCS
- 发布
- 2006-12-29
- 实施
