43.040.10 电气和电子设备 标准查询与下载

BS ISO 16844-6:2022 公路车辆 行驶记录仪系统 诊断通信接口

1   Scope This document specifies the CAN-based and the K-Line communication between the recording equipment and service tools for software download and calibrating purposes. The provided requirements and recommendations cover physical, data link, network, session, and application layers according to the OSI reference model as well as the unified diagnostics services.

Road vehicles. Tachograph systems. Diagnostic communication interfaces

BS ISO 16844-3:2022 公路车辆 行车记录仪系统 运动传感器通信接口

1   Scope This document specifies the communication interface between motion sensor and recording equipment. This includes the mechanical, electrical and logical requirements.

Road vehicles. Tachograph systems - Motion sensor communication interface

GSO ISO 19453-3:2022 道路车辆 电力推进车辆驱动系统电气电子设备的环境条件和试验 第3部分：机械载荷

ISO 19453-3:2018 specifies requirements for the electric propulsion systems and components with maximum working voltages according to voltage class B. It does not apply to high voltage battery packs (e.g. for traction) and systems or components inside. It describes the potential environmental stresses and specifies tests and requirements recommended for different stress levels on/in the vehicle. ISO 19453-3:2018 describes mechanical loads.

Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 3: Mechanical loads

GSO ISO 16750-3:2022 道路车辆 电气和电子设备的环境条件和测试 第3部分：机械载荷

ISO 16750-3:2012 applies to electric and electronic systems/components for road vehicles. It describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the vehicle. ISO 16750-3:2012 describes mechanical loads.

Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 3: Mechanical loads

GSO ISO 19453-5:2022 道路车辆 电力推进车辆驱动系统电气电子设备的环境条件和试验 第5部分：化学负荷

ISO 19453-5:2018 specifies requirements for the electric propulsion systems and components with maximum working voltages according to voltage class B. It does not apply to high voltage battery packs (e.g. for traction) and systems and components inside. It describes the potential environmental stresses and specifies tests and requirements recommended for different stress levels on/in the vehicle. ISO 19453-5:2018 describes chemical loads. NOTE Conditions and testing for a continuous contact can be determined from other standards or agreed upon between the customer and the supplier.

Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 5: Chemical loads

GSO ISO 19453-4:2022 道路车辆 电力推进车辆驱动系统电气电子设备的环境条件和试验 第4部分：气候载荷

ISO 19453-4:2018 specifies requirements for the electric propulsion systems and components with maximum working voltages according to voltage class B. It does not apply to high voltage battery packs (e.g. for traction) and systems and components inside. It describes the potential environmental stresses and specifies tests and requirements recommended for different stress levels on/in the vehicle. ISO 19453-4:2018 describes climatic loads.

Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 4: Climatic loads

GSO ISO 19453-1:2022 道路车辆 电力推进车辆驱动系统电气电子设备的环境条件和测试 第1部分：总则

ISO 19453-1:2018 specifies requirements for the electric propulsion systems and components with maximum working voltages according to voltage class B. It does not apply to high voltage battery packs (e.g. for traction) and systems or components inside. It describes the potential environmental stresses and specifies tests and requirements recommended for different stress levels on/in the vehicle. ISO 19453-1:2018 contains definitions and general requirements. Like all other parts of the 19453 series, it is not intended to apply to environmental requirements or testing for: - wiring harnesses, cables and electrical connectors; - parts or assemblies inside an equipment, if not otherwise specified; - system integration of equipment and system validation on vehicle level, if not otherwise specified in a test requirement.

Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 1: General

GSO ISO 16750-4:2022 道路车辆 电气和电子设备的环境条件和测试 第4部分：气候负荷

ISO 16750-4:2010 applies to electrical and electronic systems/components for road vehicles. ISO 16750-4:2010 describes the potential environmental stresses and specifies tests and requirements recommended for the specific mounting location on/in the road vehicle. ISO 16750-4:2010 describes climatic loads.

Road vehicles — Environmental conditions and testing for electrical and electronic equipment — Part 4: Climatic loads

ISO 4091:2003/Amd 1:2022 道路车辆.牵引车和被牵引车电气连接用连接器.定义、试验和要求.修改件1

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Definitions, tests and requirements — Amendment 1

ISO 16844-3:2022 道路车辆.行车记录仪系统.第3部分:运动传感器通信接口

This document specifies the communication interface between motion sensor and recording equipment. This includes the mechanical, electrical and logical requirements .

Road vehicles — Tachograph systems — Part 3: Motion sensor communication interface

ISO 16844-7:2022 道路车辆.行车记录仪系统.第7部分:参数

This document specifies the parameters used on the service interface of the recording equipment. Some of them are specified in detail in this document, while others are given in the ISO 14299 series.

Road vehicles — Tachograph systems — Part 7: Parameters

ISO 16844-6:2022 道路车辆.行车记录仪系统.第6部分:诊断通信接口

This document specifies the CAN-based and the K-Line communication between the recording equipment and service tools for software download and calibrating purposes. The provided requirements and recommendations cover physical, data link, network, session, and application layers according to the OSI reference model as well as the unified diagnostics services.

Road vehicles — Tachograph systems — Part 6: Diagnostic communication interfaces

QC/T 1169-2022 汽车用液晶仪表

Automobile LCD instrument

QC/T 1166-2022 汽车用流媒体后视镜

Streaming media rearview mirror for cars

ISO 16844-2:2022 道路车辆.行车记录仪系统.第2部分:记录装置通信接口

This document specifies the electrical interfaces of the data and the service interfaces. The electrical interfaces to the CAN-based in-vehicle networks are not in the scope of this document.

Road vehicles — Tachograph systems — Part 2: Recording unit communication interface

IEC 63033-4:2022 车辆多媒体系统和设备.环绕视图系统.第4部分:摄像机监控系统的应用

Multimedia systems and equipment for vehicles - Surround view system - Part 4: Application for camera monitor systems

BS ISO 16844-4:2022 公路车辆 行驶记录仪系统 显示单元通讯接口

What is ISO 16844-4 - Display unit communication interface of tachograph system about? ISO 16844-4 is the fourth part of the ISO 16844 multi-series regarding tachograph systems in road vehicles. ISO 16844-4 specifies the CAN-based data communication between the display unit and other devices connected to an SAE J1939-based in-vehicle network. The provided requirements and recommendations cover physical, data link, network, and application layers according to the OSI reference model. Additionally, ISO 16844-4 specifies the parameter groups, which are supported. Who is ISO 16844-4 - Display unit communication interface of tachograph system for ? ISO 16844-4 on tachograph systems in road vehicles is useful for: Automakers Taxi and cab service providing organizations Courier and delivery service providing organizations Vehicle rental service providers Automobile engineers

Road vehicles. Tachograph systems. Display unit communication interface

BS ISO 16844-1:2022 公路车辆 行驶记录仪系统 机电元件

What is ISO 16844-1 - Electromechanical components of tachograph systems about? ISO 16844-1 is the first part of the ISO 16844 multi-series regarding tachograph systems in road vehicles. ISO 16844-1 specifies the mechanical dimensions of mandatory connectors and optional connectors used by the recording equipment for the data and the service interfaces. This includes, in particular, the connection to the CAN-based in-vehicle networks. Who is ISO 16844-1 - Electromechanical components of tachograph systems for ? ISO 16844-1 on tachograph systems in road vehicles is useful for: Automakers Taxi and cab service providing organizations Courier and delivery service providing organizations Vehicle rental service providers Automobile engineers Why should you use ISO 16844-1 - Electromechanical components of tachograph systems ? The digital tachograph concept is based on recording equipment storing data, related to the activities of the various drivers driving the vehicle, on which it is installed. A tachograph system consists of various components which need to be well integrated within the vehicle to function as intended. ISO 16844-1 provides you with connector dimensions for tachograph systems and guides you to connect the various components in their intended connections. ISO 16844-1 also provides you references to test method documents that will help you v...

Road vehicles. Tachograph systems. Electromechanical components

T/CAAMTB 71-2022 车用低压电子水泵

本文件规定了车用低压电子水泵的术语和定义、基本参数、一般要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于具有调速或不调速两种运行状态的车用低压电子水泵。

Low-voltage electronic water pumps for vehicles

KS R ISO 19453-5-2022 道路车辆.电动推进车辆驱动系统用电气和电子设备的环境条件和试验.第5部分:化学负载

Road vehicles — Environmental conditions and testing for electrica and electronic equipment for drive system of electric propulsion vehicles — Part 5: Chemical loads