共找到 1138 条与 车身及车身附件 相关的标准,共 76 页
Strength requirement and test method of automobile seats,their anchorages and any head restraints
Methods and requirements of airbag system abuse test for automobile
Frontal airbag—Technical requirements of protection for out of position occupant
本标准规定了机动车用儿童约束系统产品型号编制的基本构成和表达方式、儿童约束系统产品识别代号的某本构成、内容标示位置、标示要求。 本标准适用于中国境内销售的机动车用儿童约束系统产品。 本标准不适用于儿童约束系统零部件的编号及识别。
Model coding rules and identification number of child restraint system
Production label for child restraint system of power-driven vehicles
Passenger detection device for vehicle seat belt reminder
Protective devices against unauthorized use for all-terrain vehicles
GB/T 32085的本部分规定了汽车空调滤清器粉尘(包括灰尘和花粉等)过滤性能的试验方法。 本部分适用于流量150 m/h~680 m/h的汽车空调滤清器。
Automobiles.Cabin air filter.Part 1:Test for particulate filtration
GB/T32085 的本部分规定了测试汽车空调滤清器对有害气体动态吸附性能的若干试验方法。 本部分适用于测试能减少来自外部环境或内循环中的有害气体和异味浓度的汽车空调滤清器。
Automobiles.Cabin air filter.Part 2: Test for gas filtration
本标准规定了驾驶员前方180。 内直接视野的要求和测量方法。 本标准适用于Ml类汽车”
Motor vehicles forward visibility for drivers.Requirements and measurement methods
本标准规定了汽车电动天窗总成的技术要求、试验方法、检验规则及标志、包装、运输、储存等。本标准适用于标称电压12V、24V汽车用电动天窗总成,以下简称“天窗”。汽车固定天窗也可参照使用。
The assembly of electrical operation sunroof about motor vehicle
本标准规定M和N类以及少于四轮并至少驾驶室被部分封闭的工类机动车辆的间接视野装置。 本标准适用于M和N类及至少驾驶室被部分封闭的类机动车辆的间接视野装置安装。
Motor vehicles.Devices for indirect vision.Requirements of performance and installation
本标准规定了汽车门锁及车门保持件,包括锁体、铰链和其他支撑方式的术语和定义、技术要求及试验方法。本标准适用于M和N类车辆上用于乘员进出的汽车侧门(包括滑动门)或后门的门锁及车门保持件。
Motor vehicles' door locks and retention components performance requirements and test methods
本标准规定了汽车风窗玻璃刮水器和洗涤器的术语和定义、性能要求和试验方法,包括风窗玻璃刮水器刮刷面积的测量方法。本标准适用于M类车辆驾驶员前方180°视野范围。
Motor vehicles-windscreen wiper and washer systems.Performance requirements and test methods
本标准规定了汽车安全带、约束系统、儿童约束系统和ISOFIX儿童约束系统的定义、技术要求和试验方法。本标准适用于:a)前向或后向座椅上安装了作为成年乘员独立装备单独使用的安全带和约束系统的M、N类车辆;b) M、N类车辆前向或后向座椅上作为成年乘员独立装备单独使用的安全带和约束系统;c)安装了儿童约束系统和ISOFIX儿童约束系统的M和N类车辆;d)装有安全带提醒装置的M类车辆。
Safety-belts,restraint systems,child restraint systems and ISOFIX child restraint systems for occupants of power-driven vehicles
本标准规定了专用校车的学生座椅系统(下简称“座椅”)及其车辆固定件的术语和定义、要求及试验方法。 本标准适用于专用校车上的学生座椅以及用于安装该座椅的车辆固定件,也适用于专用校车上安装于座椅前方的约束隔板。
The strength of student seat systems and their anchorages of specical school bus
本标准规定了机动车儿童乘员用约束系统(以下简称儿童约束系统)的术语和定义,在车辆上的安装及固定要求,约束系统的结构,以及对约束系统总成及其组成部件的性能要求和试验方法。 本标准适用于适合安装在三个车轮或机动车的儿童乘员用约束系统,但不适用于安装在折叠座椅或侧向座椅上的儿童约束系统。
Restraining devices for child occupants of power-driven vehicles
本标准规定了压缩天然气汽车燃料系统碰撞安全的技术要求和试验方法。 本标准适用于燃料系统采用压缩天然气的M1 类汽车,包括采用两用燃料压缩天然气汽车、单一燃料压缩天然气汽车,其他相关类型车辆也可参照执行。
The safety requirement of fuel system for compressed natural gas vehicle in the collision
本标准规定了汽车罩(盖)锁系统的要求。 本标准适用于M类、N类汽车。
Motor vehicles-hood latch system
本标准规定了汽车转向机构在正面碰撞过程中对驾驶员伤害方面的技术要求和试验方法。 本标准适用于M类车辆和最大总质量小于1 500kg的N车辆,其他车辆可参照本标准进行试验。
The stipulation protecting drivers from being injured by motor vehicle steering mechanism
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号