43.040.60 车身及车身附件 标准查询与下载

QC/T 1182-2023 汽车空调铝合金板式换热器

Aluminum plate heat exchanger for automotive air-conditioning

QC/T 1188-2023 汽车零部件再制造产品技术规范 铝合金车身覆盖件

Technical specification for remanufacturing automobile component—Aluminum alloy body cover panel

QC/T 665-2023 汽车空调充注阀

Charging valve for automotive air conditioning

QC/T 656-2023 汽车空调用空气调节装置总成

Heating ventilation and air conditioning assembly for automotive air conditioning

QC/T 1189-2023 乘用车用保险杠

Bumper for passenger car

QC/T 1181-2023 汽车空调套管式回热换热器

Automotive air-conditioning sleeve type internal heat exchanger

QC/T 1187-2023 汽车安全带试验用假人

Manikin for automobile safety belt test

QC/T 1184-2023 汽车零部件再制造产品技术规范 装饰用保险杠

Technical specification for remanufacturing automobile component—Bumper protector accessories

QC/T 55-2023 汽车座椅舒适性试验方法

Vehicle seat comfort test method

T/CCPITCSC 123-2023 固定汽车前风窗玻璃用下卡条结构件

本文件规定了固定汽车前风窗玻璃用下卡条结构件（以下简称卡条）的产品技术要求、产品检验方法、产品检验规则及产品的包装、标识、运输与贮存要求。

Structural bottom profile for fixing automobile windscreen

T/SHDSGY 071-2023 新能源汽车热管理系统技术

本文件规定了术语和定义、一般要求、基本要求、检测方法、标志、包装、运输和贮存。 本文件适用于新能源汽车热管理系统技术。

New energy vehicle thermal management system technology

T/QGCML 779-2023 发动机盖支撑杆

本文件规定了发动机盖支撑杆的术语和定义、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本文件适用于发动机盖支撑杆的生产和检验。

engine cover support rod

T/CAAMTB 118-2023 乘用车外包围改装指南

本文件规定了乘用车外包围改装的技术要求、评估检查方法、其他要求。 本文件适用于乘用车外包围改装。

Passenger car exterior surround modification guide

T/CAAMTB 116-2023 汽车车门锁扣性能要求和试验方法

本文件规定了汽车车门锁扣相关的术语和定义、性能要求、试验方法、检验规则和标志、包装、运输和储存要求。 本文件适用于M1和N1类车辆的侧门、后门或行李箱的锁扣。

Performance requirements and test methods for automobile door latch

BS ISO 11154:2023 公路车辆 屋顶承重车

1   Scope This document applies for roof racks of passenger cars and light commercial vehicles up to a permissible total weight of 3,5 t according to ISO 1176 and specifies requirements and test methods for these. It is also valid for roof racks mounted on trailers. So-called magnetic or suction foot racks, i.e. roof racks whose attachment on the vehicle is only via magnetic forces or vacuum, are excluded from this document. This document provides safety-related requirements under consideration of the weight, centre of gravity, air resistance and other safety-relevant properties for structures of roof racks for which no other technical or statutory regulations otherwise apply and which are not listed in 4.2. In individual cases, test requirements can extend beyond these requirements.

Road vehicles. Roof load carriers

T/CASME 341-2023 高可靠性自动防眩目内后视镜

本文件规定了高可靠性自动防眩目内后视镜的技术要求、试验方法、检验规则、标志、包装、运输和贮存。

High reliability automatic anti-glare interior rearview mirror

ISO 11154:2023 道路车辆.车顶承载架

This document applies for roof racks of passenger cars and light commercial vehicles up to a permissible total weight of 3,5 t according to ISO 1176 and specifies requirements and test methods for these. It is also valid for roof racks mounted on trailers. So-called magnetic or suction foot racks, i.e. roof racks whose attachment on the vehicle is only via magnetic forces or vacuum, are excluded from this document. This document provides safety-related requirements under consideration of the weight, centre of gravity, air resistance and other safety-relevant properties for structures of roof racks for which no other technical or statutory regulations otherwise apply and which are not listed in 4.2. In individual cases, test requirements can extend beyond these requirements.

Road vehicles — Roof load carriers

T/CIPR 004-2023 车厢底板

本文件规定了车厢底板的技术要求、试验方法、检验规则和运输。 本文件适用于道路运输的车厢底板。

Carriage floor

ASTM D6675-23 汽车钢板上有机涂层的盐加速室外外观腐蚀试验的标准实施规程

1.1 This practice is designed to assist procedures to be followed when conducting outdoor exposures to evaluate cosmetic corrosion that might occur in steel panels covered with an organic coating that has been damaged. The outdoor exposures described are based on Practices G7 and G50 and include periodic wetting of the test specimens with a salt solution. 1.2 The methods of preparing test specimens and the particular exposure requirements of materials are beyond the scope of this practice. 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

JT/T 305-2023 客车电动换气扇

本标准适用于客车用电动换气扇的生产和检验。

Passenger car electric ventilation fan