共找到 890 条与 摩托车和机动自行车 相关的标准,共 60 页
GB/T 5359的本部分规定了与摩托车和轻便摩托车性能有关的术语。 本部分适用于GB/T 5359.1所定义的摩托车和轻便摩托车(以下简称“摩托车”)。
Term for motorcycles and mopeds.Part 2:Performance of vehicles
GB/T 5359的本部分规定了与摩托车和轻便摩托车尺寸有关的一般原则和术语。 本部分准适用于GB/T 5359.1所定义的摩托车和轻便摩托车(以下简称“车辆”)。
Term for motorcycles and mopeds.Part 3:Dimensions of vehicle with two and three wheels
GB/T 5359的本部分规定了摩托车和轻便摩托车质量术语的一般原则及术语和定义。 本部分适用于GB/T 5359.1所定义的摩托车和轻便摩托车(以下简称“摩托车”)。
Term for motorcycles and mopeds.Part 4:Mass of vehicle with two and three wheels
本标准规定了摩托车和轻便摩托车鼓式制动的制动鼓尺寸系列、盘式制动的螺纹孔系列、轮毂轴承孔系列、花键传动的花键参数和轮毂的安装尺寸系列。 本标准适用于摩托车和轻便摩托车各类车轮(如轻合金车轮、辐条式车轮、辐板式车轮)用轮毂。
Series of mounting dimensions for wheel hub of motorcycles and mopeds
本标准规定了摩托车和轻便摩托车制动力有关的术语和定义以及相应的要求和试验方法。 本标准适用于摩托车和轻便摩托车(越野车和赛车除外)。
Performance and measurement method for braking force of motorcycles and mopeds
本标准规定了摩托车和轻骑摩托车用火花点火式发动机在台架上进行性能试验、可靠性试验和耐久性试验的方法。 本标准适用于摩托车和轻便摩托车用火花点火式发动机。
Method of bench test of engine for motorcycles and mopeds
本标准规定了摩托车和轻便摩托车道路试验试验前的准备、试验条件、试验方法、取值规则和对试验记录的一般要求。 本标准适用于摩托车和轻便摩托车(赛车和电动摩托车除外)的道路试验。
Methods of road test for motorcycles and mopeds
本标准规定了摩托车和轻便摩托车轻合金车轮的术语和定义、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于道路上行驶的摩托车和轻便摩托车用轻合金整体车轮和轻合金组合车轮。
Light-alloy wheels for motorcycles and mopeds
本标准规定了摩托车和轻便摩托车型号编制方法。 本标准适用于GB/T 5359.1中所规定的动力为一种热机的摩托车和轻便摩托车的型号编制。
Code of designation for motorcycles and mopeds
本标准规定了摩托车和轻便摩托车的尺寸和质量参数的测量条件、测量方法和取值规则。 本标准适用于摩托车和轻便摩托车。
Measuring method of dimensions and masses parameter for motorcycles and mopeds
本标准规定了摩托车和轻便摩托车外部凸出物的有关定义、要求和试验方法等。 本标准适用于摩托车和轻便摩托车。
External projections from motorcycles and mopeds
本标准规定了摩托车和轻便摩托车发动机最大扭矩和最大净功率的测量方法。 本标准适用于摩托车和轻便摩托车用发动机。
Measurement methods of maximum torque and maximum net power of engines for motorcycles and mopeds
本标准规定了摩托车和轻便摩托车的制动性能要求和试验方法。 本标准适用于摩托车和轻便摩托车。 本标准不适用于最高设计车速不超过25km/h 的轻便摩托车和残疾人用车。
Performance and measurement method for braking of motorcycles and mopeds
本标准规定了了摩托车乘员扶手的要求。 本标准适用于两轮摩托车和边三轮摩托车的主车。
Passenger hand-holds on motorcycles
本标准规定了金属卤化物灯用镇流器能效限定值、节能评价值、能效等级、检验与计算方法和检验规则。 本标准适用范围为额定电压220V、频率50Hz交流电源、额定功率为175W~1500W单端金属卤化物灯用LC顶峰超前式的独立式和内装式电感镇流器。
The minimum allowable values of energy efficiency and the energy efficiency grades for ballast of metal-halide lamps
本标准规定了摩托车和轻便摩托车燃油箱的安全性能要求和试验方法。本标准适用于摩托车和轻便摩托车(以下简称摩托车)用金属燃油箱和非金属燃油箱。
Safety property requirements and test method for fuel tanks of motorcycles and mopeds
本标准规定了两轮摩托车和两轮轻便摩托车道路行驶阻力的测定及其在底盘测功机上的设定方法。 本标准适用于两轮摩托车和两轮轻便摩托车(以下简称摩托车)。
Chassis dynamometer setting for motorcycles and mopeds--Coastdown method
本标准规定了摩托车(赛车除外)加速行驶躁声限值及测量方法。并规定了摩托车定置躁声测量方法。
Limits and measurement of noise emitted by motorcycles
本标准规定了两轮摩托车及轻便摩托车照明和光信号装置的安装一般技术要求、特殊规定、试验方法及检验规则等。 本标准适用于两轮摩托车及轻便摩托车(L1、L3类)。
Provisions for installation of two wheel motorcycle and moped lighting and light-signalling devices
本标准规定了电动自行车的定义、产品分类、技术要求、试验方法和检验规则等。 本标准适用于电动自行车。
Electric bicycles--General technical requirements
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号