43.140 摩托车和机动自行车 标准查询与下载
共找到 890 条与 摩托车和机动自行车 相关的标准，共 60 页
Scope is not provided for this standard
Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
- ICS
- 43.140
- CCS
- 发布
- 2023-05-03
- 实施
This consumer safety specification includes requirements for safety instructions and labeling for recreational powered scooters and pocket bikes. Safety instructions shall be included with each unit and shall have the following: age and weight limit of the user, original design and configuration of the unit, operation of the unit, pre-operation checks, demonstration of unit, appropriate clothing and helmet, and maintenance. The maintenance instructions shall include: brake adjustments and service, tire inflation pressures, lubrication points including recommended lubricants, drive system specification and service instructions, frame inspection procedures, capacity by weight, maximum operating speeds, service and adjustment procedures for all components, and a phone number to secure maintenance or operating assistance from the manufacturer. Name and place of the business, manufacturer, importer, distributor, or seller shall be listed in the manual and on the retail box. Warning systems shall be in contrasting colors, permanent, conspicuous, and in sans serif style font.
Standard Consumer Safety Specification for Safety Instructions and Labeling for Recreational Powered Scooters and Pocket Bikes
- ICS
- 43.140
- CCS
- 发布
- 2023-05-03
- 实施
Scope is not provided for this standard
Acoustics — Measurement of noise emitted by two-wheeled mopeds in motion — Engineering method
- ICS
- 43.140
- CCS
- 发布
- 2023-05-03
- 实施
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests — Amendment 2: Correlation factors
- ICS
- 43.140
- CCS
- 发布
- 2023-05
- 实施
- 2023-05
Motorcycles — Consideration for use cases of ISO 26262-12 MSIL classification
- ICS
- 43.140
- CCS
- 发布
- 2023-05
- 实施
- 2023-05
ISO 13232-7:2005/Amd 2:2023 摩托车 用于摩托车上安装的骑手碰撞保护装置的研究评估的测试和分析程序 第 7 部分：执行摩托车冲击测试计算机模拟的标准化程序 修订 2：相关因子
Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests — Amendment 2: Correlation factors
- ICS
- 43.140
- CCS
- 发布
- 2023-05
- 实施
- 2023-05
1 Scope This document specifies safety requirements for conductive connection of electrically propelled mopeds and motorcycles (referred to as the EVs) to external electric circuits. NOTE 1 External electric circuits include external electric power supplies and external electric loads. It does not provide comprehensive safety information for manufacturing, maintenance and repair personnel. It applies only to on-board charging systems between the plug or vehicle inlet and RESS circuits. NOTE 2 The requirements when not connected to external electric circuits are specified in the ISO 13063 series. Requirements for bidirectional energy transfer DC to AC are under consideration and are not part of this document. NOTE 3 The safety requirements for DC EV supply equipment where protection relies on electrical separation are specified in IEC 61851‑25. NOTE 4 The safety requirements for DC EV supply equipment where protection relies on double or reinforced insulation are specified in IEC TS 61851‑3‑1 and IEC TS 61851‑3‑2.
Electrically propelled mopeds and motorcycles. Safety requirements for conductive connection to an external electric power supply
- ICS
- 43.140
- CCS
- 发布
- 2023-04-30
- 实施
- 2023-04-30
This document specifies safety requirements for conductive connection of electrically propelled mopeds and motorcycles (referred to as the EVs) to external electric circuits. NOTE 1 External electric circuits include external electric power supplies and external electric loads. It does not provide comprehensive safety information for manufacturing, maintenance and repair personnel. It applies only to on-board charging systems between the plug or vehicle inlet and RESS circuits. NOTE 2 The requirements when not connected to external electric circuits are specified in the ISO 13063 series. Requirements for bidirectional energy transfer DC to AC are under consideration and are not part of this document. NOTE 3 The safety requirements for DC EV supply equipment where protection relies on electrical separation are specified in IEC 61851-25. NOTE 4 The safety requirements for DC EV supply equipment where protection relies on double or reinforced insulation are specified in IEC TS 61851-3-1 and IEC TS 61851-3-2.
Electrically propelled mopeds and motorcycles - Safety requirements for conductive connection to an external electric power supply (ISO 18246:2023)
- ICS
- 43.140
- CCS
- 发布
- 2023-04-05
- 实施
- 2023-07-31
1 Scope This document specifies electric safety requirements for protection against electric shock and thermal incidents of electric propulsion systems and conductively connected auxiliary electric systems of-electrically propelled mopeds and motorcycles when used in normal conditions. It is applicable to a maximum working voltage of the on-board electrical circuit up to 1 000 V alternating current (a.c.) or 1 500 V direct current (d.c.). This document does not provide comprehensive safety information for manufacturing, maintenance and repair personnel. NOTE Requirements for conductive connections of electrically propelled mopeds and motorcycles to an external electric power supply are described in ISO 18246.
Electrically propelled mopeds and motorcycles. Safety specifications - Electrical safety
- ICS
- 43.140
- CCS
- 发布
- 2023-03-31
- 实施
- 2023-03-31
Common battery module for micro electric vehicles — Part 1: Requirements for electric/electronic and mechanical characteristics
- ICS
- 43.140
- CCS
- 发布
- 2023-03-06
- 实施
本文件规定了电动自行车通信协议的总则、通信单元、通信过程及验证。
General specification for communication protocol of electric bicycle
- ICS
- 43.140
- CCS
- C376
- 发布
- 2023-02-20
- 实施
- 2023-04-19
2、主要内容 本部分标准由7章组成。主要内容如下： (1)标准的适用范围 本文件规定了电动自行车集中充电设施运营管理服务规范的总体要求、运营管理要求、服务要求和评价。明确了服务范围是电动自行车集中充电的三种型式：交流充电桩、换电柜和充电柜。 (2)规范性引用文件 引用了国家强制性标准一项，国家推荐性标准三项。 (3)术语和定义 明确GB/T 42236.1-2022标准中的术语和定义适用于本文件，同时对本文件中的五个专用名词进行了定义。 (4)总体要求 明确了电动自行车集中充电设施运营管理服务性质具有普遍性、互补性、方便性、安全性、统一性、持续性和规范性。 (5)运营管理要求 a)基本要求：包括单位资质、基础条件、管理制度； b)人员要求：包括运营、维护、保养工作人员要求，服务规程、系统管理人员要求以及培训要求； c)设施要求：电动自行车集中充电设施技术要求除应满足GB/T 42236.1-2022 电动自行车集中充电设施 第1部分外，还应建有运营管理系统； d)应急管理要求；对电动自行车集中充电设施在运营中发生的突发事件类型进行了明确，并规定了相应的应急措施。 (6)服务要求 a)服务网点：包括充电桩、充电柜和换电柜的网点设置和建设要求、网点周围环境要求、以及网点管理要求； b)服务客户端程序：运营单位应建立专门的服务客户端程序，以及客户端程序应提供的服务项目； c)收费和退费：包括充换电设施收费、退费的要求； d)设施运营与维护：包括设施完好率、锂离子蓄电池最低容量、系统故障率及故障排除要求； e)服务记录：包括记录范围，记录内容的准确性、及时性、真实性和完整性； f)赔偿和保险要求； g)废旧锂离子蓄电池处理要求。 (7)评价 明确运营单位应定期或不定期对运营管理进行评价，促进服务质量的提高。 3、重要数据的来源 标准中重要数据的来源见八、重大分歧意见的处理经过和依据。
Operation and management service specifications for centralized charging facilities for electric bicycles
- ICS
- 43.140
- CCS
- C376
- 发布
- 2023-01-10
- 实施
- 2023-03-10
This document specifies safety requirements for conductive connection of electrically propelled mopeds and motorcycles (referred to as the EVs) to external electric circuits. NOTE 1 External electric circuits include external electric power supplies and external electric loads. It does not provide comprehensive safety information for manufacturing, maintenance and repair personnel. It applies only to on-board charging systems between the plug or vehicle inlet and RESS circuits. NOTE 2 The requirements when not connected to external electric circuits are specified in the ISO 13063 series. Requirements for bidirectional energy transfer DC to AC are under consideration and are not part of this document. NOTE 3 The safety requirements for DC EV supply equipment where protection relies on electrical separation are specified in IEC 61851-25. NOTE 4 The safety requirements for DC EV supply equipment where protection relies on double or reinforced insulation are specified in IEC TS 61851-3-1 and IEC TS 61851-3-2.
Electrically propelled mopeds and motorcycles — Safety requirements for conductive connection to an external electric power supply
- ICS
- 43.140
- CCS
- 发布
- 2023-01-10
- 实施
- 2023-01
Swappable common-use battery pack for electric motorcycles — Part 1: General requirements and mechanical/electrical specifications
- ICS
- 43.140
- CCS
- 发布
- 2022-12-27
- 实施
Swappable common-use battery pack for electric motorcycles — Part 2: Connector for charging and discharging
- ICS
- 43.140
- CCS
- 发布
- 2022-12-27
- 实施
Swappable common-use battery pack for electric motorcycles — Part 3: Communication protocol
- ICS
- 43.140
- CCS
- 发布
- 2022-12-27
- 实施
Swappable common-use battery pack for electric motorcycles — Part 4: Test methods for performance, safety and reliability of battery pack
- ICS
- 43.140
- CCS
- 发布
- 2022-12-27
- 实施
本文件规定了摩托车和轻便摩托车减震器的基本要求、技术要求、试验方法、检验规则、标志、包装、运输和贮存及质量承诺。 本文件适用于由弹簧、阻尼器及连接件组成的摩托车和轻便摩托车减震器（以下简称“减震器”）。
Shock absorber for motorcycles and mopeds
- ICS
- 43.140
- CCS
- C375
- 发布
- 2022-12-15
- 实施
- 2023-04-18
本文件规定了电动摩托车和电动轻便摩托车用DC/DC变换器的产品型号编制、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本文件适用于电动摩托车和电动轻便摩托车用DC/DC变换器。
DC/DC converter for electric motorcycles and electric mopeds
- ICS
- 43.140
- CCS
- C375
- 发布
- 2022-12-15
- 实施
- 2023-04-18
本文件规定了摩托车浮动式制动盘（以下简称制动盘）的结构、 基本要求、技术要求、试验方法、检验规则及标志、包装、运输、贮存和质量承诺。 本文件适用于冲压成形或激光切割成形的摩托车浮动式制动盘。
Floating brake disc for motorcycles
- ICS
- 43.140
- CCS
- C375
- 发布
- 2022-12-08
- 实施
- 2023-04-18
