43.150 自行车 标准查询与下载

ASTM F2868-19 条件2自行车车架的标准规范

1.1 This standard establishes testing requirements for the structural performance properties of Condition 2 bicycle frames. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard is applicable to adult size suspension and non-suspension bicycle frames. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Condition 2 Bicycle Frames

ASTM F2614-19 条件3自行车架的标准规格

1.1 This specification establishes testing requirements for the structural performance properties of Condition 3 bicycle frames. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Condition 3 Bicycle Frames

ASTM F2843-19 条件0自行车车架的标准规范

1.1 This specification establishes testing requirements for the structural performance properties of Condition 0 bicycle frames. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Condition 0 Bicycle Frames

JIS D 9415:2019 自行车. 链轮和曲柄

Bicycles -- Chainwheels and cranks

JIS D 9413:2019 自行车. 车把

Bicycles -- Handle grips

JIS D 9313-1:2019 循环 第1部分：试验方法和零件试验方法的通则

Cycles -- Part 1: General rule for test method and parts test methods

JIS D 9301:2019 普通自行车

Bicycles for general use

JIS D 9313-2:2019 循环 第2部分：制动装置试验方法

Cycles -- Part 2: Braking device test methods

DIN SPEC 31063:2018 自行车和电动自行车车架、前叉和车架组的重量测定

This DIN SPEC describes the determination and indication of the weight of bicycle and e-bike frames, of bicycle and e-bike forks and of frame sets. This DIN SPEC does not specify safety requirements.

Weight determination of frames, forks and frame sets for bicycles and e-bikes

T/ZKJXX 00002-2018 共享自行车全球卫星导航系统定位终端

本标准规定了共享自行车全球卫星导航系统定位终端的组成、功能要求、性能要求、安全要求、试验方法和验收方法。 本标准适用于安装在共享自行车上的定位终端。

Global navigation satellite system positioning terminal for bicycle sharing

ASTM F2043-13(2018) 自行车使用标准分类

1.1 This classification covers bicycle usage conditions and a method of identifying bicycles and components for use within that system. 1.2 The values stated in SI units are to be regarded as the standard. The values in parentheses are for information only. 1.3 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Classification for Bicycle Usage

T/CBA 1-2018 电动自行车集中充电设施设备技术规范

Technical specifications for centralized charging facilities for electric bicycles

T/ZZB 0593-2018 电动自行车整体式铝合金车轮

本标准规定了电动自行车整体式铝合金车轮的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存和质量承诺。

Integral aluminium alloy wheel of electric bicycle

JIS D 9115:2018 电动助力自行车

Electric power assisted bicycles

BS ISO 6742-2:2015+A1:2018 循环 照明和回归反射装置 回归反射装置

1   Scope This part of ISO 6742 is applicable to retro-reflective devices used on cycles intended to be used on public roads and, especially, bicycles complying with ISO 4210 and ISO 8098. This part of ISO 6742 specifies photometric and physical requirements of retro-reflective devices.

Cycles. Lighting and retro-reflective devices - Retro-reflective devices

QB/T 5242-2018 电动自行车用电线束

本标准规定了电动自行车用电线束的术语和定义、一般规定、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于QB/T 1714中界定的电动自行车所用的电线束。

Wiring harness for electric bicycles

QB/T 1883-2018 自行车 普通前轴和后轴

本标准规定了自行车普通前轴和后轴的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于QB/T 1714标准规定的一般用途自行车和助力自行车用普通前轴和后轴。 本标准不适用于中置电机转把启动的电动自行车用普通后轴。

Cycles.Ordinary front and rear hubs

QB/T 1884-2018 自行车 中轴

本标准规定了自行车中轴的产品分类与代号、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于QB/T 1714标准规定的一般用途自行车和助力自行车用中轴。

Cycles.Bottom bracket assembly

ISO 6742-2:2015/Amd 1:2018 自行车.照明和回复反射装置.第2部分:回复反射装置.修改件1

Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices — Amendment 1

ASTM F2917-12(2018) 自行车拖车循环的标准规范为人类乘客设计

1.1 This specification covers trailer cycles, intended to be pulled behind bicycles, with seat post attachment, in order to transport children. It includes test methods for confirming that this specification is satisfied. 1.2 The values stated in SI units are to be regarded as the standard. The units given in parentheses are for information only. 1.3 The following safety caveat applies to the chemical, mechanical, or physical, or a combination thereof, test methods described herein and is meant specifically for those performing the tests (in an effort to provide them with notice to take the appropriate precautions when conducting the tests). This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Bicycle Trailer Cycles Designed for Human Passengers