共找到 637 条与 特种车辆 相关的标准,共 43 页
Livestock and poultry harmless transport vehicle
本标准规定了专用车电动调平系统的术语和定义、结构与分类、基本要求、技术要求、试验方法、检验规则、标志、使用说明、包装、运输、贮存和质量承诺。 本标准适用于需要对调平精度、调平时间进行限定的专用车电动调平系统(以下简称系统)。
Electric leveling system for special vehicles
This document specifies safety requirements applicable to combustion engine powered pedestrian- controlled snow throwers. It is intended to be used with ISO 8437-1 and ISO 8437-4 to achieve the full requirements and means of verification for pedestrian-controlled snow throwers. throwers used as intended and under the conditions reasonably foreseeable by the manufacturer. It does not apply to the following: — electrically powered and battery powered snow throwers; — hand-held snow throwers; — airport or highway snow removal machines and equipment; — machines intended for use in potentially explosive atmospheres. It does not deal with hazards related to the following: — battery circuits exceeding 42 V; — mains connected starting motor; — magneto grounding circuits; — working environment; — electromagnetic compatibility. publication.
Snow throwers — Safety requirements and test procedures — Part 2: Pedestrian-controlled snow throwers
This document provides additional national and regional requirements applicable to combustion engine powered pedestrian-controlled and ride-on snow throwers. It is intended to be used with ISO 8437-1, ride-on snow throwers. throwers used as intended and under the conditions reasonably foreseeable by the manufacturer. It does not apply to the following: — electrically powered and battery powered snow throwers; — hand-held snow throwers; — airport or highway snow removal machines and equipment; — machines intended for use in potentially explosive atmospheres. It does not deal with hazards related to the following: — battery circuits exceeding 42 V; — mains connected starting motor; — magneto grounding circuits; — working environment; — electromagnetic compatibility. publication.
Snow throwers — Safety requirements and test procedures — Part 4: Additional national and regional requirements
This document defines terms and definitions and common test methods applicable to combustion engine powered pedestrian-controlled and ride-on snow throwers. It is intended to be used with pedestrian-controlled and ride-on snow throwers. throwers used as intended and under the conditions reasonably foreseeable by the manufacturer. It does not apply to the following: — electrically powered and battery powered snow throwers; — hand-held snow throwers; — airport or highway snow removal machines and equipment; — machines intended for use in potentially explosive atmospheres. It does not deal with hazards related to the following: — battery circuits exceeding 42 V; — mains connected starting motor; — magneto grounding circuits; — working environment; — electromagnetic compatibility. publication.
Snow throwers — Safety requirements and test procedures — Part 1: Terminology and common tests
This document specifies safety requirements applicable to combustion engine powered ride-on snow throwers. It is intended to be used with ISO 8437-1 and ISO 8437-4 to achieve the full requirements and means for ride-on snow throwers. throwers used as intended and under the conditions reasonably foreseeable by the manufacturer. It does not apply to the following: — electrically powered and battery powered snow throwers; — hand-held snow throwers; — airport or highway snow removal machines and equipment; — machines intended for use in potentially explosive atmospheres. It does not deal with hazards related to the following: — battery circuits exceeding 42 V; — mains connected starting motor; — magneto grounding circuits; — working environment; — electromagnetic compatibility. publication.
Snow throwers — Safety requirements and test procedures — Part 3: Ride-on snow throwers
Technical conditions of pure electric road sweeper
General technical requirements for refrigerated vehicles and insulated vehicles
Functional Requirements for Sanitation Vehicles Part 4: Transportation Vehicles for Kitchen Waste Grease
本标准规定了商用车免维护转向拉杆总成(以下简称拉杆总成)的术语定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存、质量承诺。 本标准适用于1 T~10 T的商用车免维护转向拉杆总成。
Commercial vehicle of maintenance free steering tie rod assy
Construction waste transportation vehicle signs and monitoring terminals, compartment specifications and airtightness
本标准规定了汽车维修服务的术语和定义、总要求、维修服务流程、服务质量管理。本标准适用于汽车整车维修企业,其它的汽车维修企业可参照执行。
Guidelines for the Management of Automobile Maintenance Services
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号