43.180 检查、维修和试验设备 标准查询与下载

ISO 15830-2:2005 道路车辆.WorldSID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.第3部分:机械子系统

This part of ISO 15830 specifies requirements for mechanical components, drawings and specifications, certification tests, and support equipment for the WorldSID 50th percentile side impact dummy, a standard anthropomorphic dummy for side impact testing of road vehicles. It is applicable to impact tests involving: -- passenger vehicles of category M1 and goods vehicles of category N1, -- impacts to the side of the vehicle structure, and -- impact tests involving use of an anthropomorphic dummy as a human surrogate for the purpose of evaluating compliance with vehicle safety standards.

Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 2: Mechanical subsystems

ISO 15031-6:2005 道路车辆.车辆与发射相关诊断用外部设备间的通信.第6部分:故障诊断编码定义

This part of ISO 15031 provides recommended uniformity for alphanumeric trouble codes. It further provides guidance for uniform messages associated with these codes. It specifies several sections addressing format, structure, messages and a few examples, and is applicable to electrical/electronic systems diagnostics of motor vehicles. Annex A specifies the diagnostic trouble code naming guidelines for signals from components, signals to components, system based diagnostics, and signals using a subfault strategy. Annex B specifies the actual code assignments and description for powertrain system diagnostic trouble codes. Annex C specifies the actual code assignments and description for network communication system diagnostic trouble codes, body system diagnostic trouble codes, and chassis system diagnostic trouble codes. Annex D specifies the DTC failure category and Subtype definition of the DTC failure type byte which is an extension of a base DTC to more precisely describe the fault symptom of the DTC.

Road vehicles - Communication between vehicle and external equipment for emissions-related diagnostics - Part 6: Diagnostic trouble code definitions

ISO 15830-3:2005 道路车辆.WorldSID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.第3部分:电子子系统

This part of ISO 15830 specifies requirements for electronic components of the WorldSID 50th percentile side impact dummy, a standard anthropomorphic dummy for side impact testing of road vehicles. It is applicable to impact tests involving: -- passenger vehicles of categories M1 and goods vehicles of categories N1, -- impacts to the side of the vehicle structure, and -- impact tests involving the use of an anthropometric dummy as a human surrogate for the purpose of evaluating compliance with vehicle safety standards.

Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 3: Electronic subsystems

ISO 15830-4:2005 道路车辆.WorldSID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.第4部分:用户手册

This part of ISO 15830 specifies requirements for assembling and disassembling of the WorldSID 50th percentile side impact dummy, a standard anthropomorphic dummy for side impact testing of road vehicles. It is applicable to impact tests involving: -- passenger vehicles of categories M1 and goods vehicles of categories N1, -- impacts to the side of the vehicle structure, and -- impact tests involving the use of an anthropometric dummy as a human surrogate for the purpose of evaluating compliance with vehicle safety standards.

Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side impact dummy - Part 4: User's manual

ISO 15830-1:2005 道路车辆.WorldSID 50th percentile侧面碰撞(试验)男性假人的设计和性能规范.第1部分:术语和基本原理

This part of ISO 15830 provides the definitions, symbols and rationale used in all parts of this International Standard for the WorldSID 50th percentile side impact dummy, a standard anthropomorphic dummy for side impact testing of road vehicles. It is applicable to impact tests involving: -- passenger vehicles of category M1 and goods vehicles of category N1, -- impacts to the side of the vehicle structure, and -- impact tests involving use of an anthropomorphic dummy as a human surrogate for purpose of evaluating compliance with vehicle safety standards.

Road vehicles - Design and performance specifications for the WorldSID 50th percentile male side-impact dummy - Part 1: Terminology and rationale

SANS 10253:2005 制动器维护车间

Establishes minimum requirements for brake service workshops that carry out work on category M1, M2, M3, N1, N2, N3, O1 (if fitted), O2, O3 and O4 vehicles.

Brake service workshops

JT/T 634-2005 汽车前轮转向角检验台

本标准规定了汽车前轮转向角检验台（以下简称转角台）的型号、要求、试验方法、检验规则、标志、标签、使用说明书、包装、运输、贮存。 本标准适用于在用汽车前轮转向角检验台。

Automotive front-wheel turning angle tester

JT/T 639-2005 汽车车体校正机

本标准规定了汽车车体校正机（以下简称校正机）的术语和定义、型号、技术要求、试验方法、检验规则以及标志、包装、运输和贮存。 本标准适用于额定承载质量不大于5000kg的各类平台式和框架式汽车车体校正机。

Autobody and frame alignment machine

JT/T 638-2005 汽车发动机电喷嘴清洗检测仪

本标准规定了汽车发动机电喷嘴清洗检测仪的技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于汽车发动机电喷嘴清洗检测仪（以下简称检测仪）的设计、生产、测试和验收。

Cleaning and detecting instrument for spray nozzles of vehicle engine

JT/T 637-2005 气门座镗床

本标准规定了气门座镗床的型式结构、技术要求、试验方法、检验规则以及标志、包装和运输。 本标准适用于修理汽车、拖拉机和摩托车等的气门座镗床。

Valve seats boring machine

JT/T 636-2005 立轴缸体缸盖平面磨床

本标准规定了立轴缸体缸盖平面磨床的型式、结构、技术要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于汽车、拖拉机的发动机缸体、缸盖结合面修理加工所用的平面磨床。

Surface grinding machines with vertical grinding wheel spindle for engine cylinder body and cover

JT/T 635-2005 轮胎拆装机

本标准规定了轮胎拆装机的术语和定义、产品结构和分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于拆装机动车轮胎的轮胎拆装机。

Tire changer

JT/T 633-2005 汽车悬架转向系间隙检查仪

本标准规定了汽车悬架转向系间隙检查仪（以下简称间隙仪）的型号、要求、试验方法、检验规则、标志、标签、使用说明书、包装、运输、贮存。 本标准适用于由机械、液压系统和电气部分组成、承载质量不大于13000kg的间隙仪。

Automotive suspension and steering clearance tester

JT/T 632-2005 汽车故障电脑诊断仪

本标准规定了汽车故障电脑诊断仪技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于汽车故障电脑诊断仪（以下简称诊断仪）的设计、生产、测试和验收。

Computer monitor for vehicle trouble diagnosis

DB31/T 343-2005 汽车快修企业技术条件

Technical criteria of quick auto maintenance and repair

DB44/T 87-2005 汽车二级维护质量评定检测方法

本标准规定了汽车二级维护质量评定的检测方法。本标准适用于GB/T 3730.1-2001规定的在道路上行驶的总质量26t以下（含26t）的汽车和总质量45t以下(含45t）的汽车列车。

Second of automobile maintains the detection method of performance rating

DB44/T 86-2005 汽车二级维护质量评定标准

本标准规定了汽车二级维护质量评定内容、评定技术要求、评定规则及采用的评定检测方法。本标准适用于GB/T 3730. 1-2001规定的在道路上行驶的总质量26t以下（含26t）的汽车和总质量45t以下（含45t)的汽车列车。

Second of automobile maintains the criteria for evaluation of quality

ASTM F559-05(2010) 用备用轮测量道路试验路线长度的标准试验方法

Maps, automobile odometers, and highway and distance markers are not sufficiently accurate to describe the length of a route for tire testing purposes. The proposed procedure describes a test method for measuring the length of a road course with sufficient accuracy for tire testing purposes.1.1 This test method covers the determination of the accurate length measurement of road courses used for testing all types of pneumatic tires on various associated vehicles. 1.2 This test method is intended for use on public highways or closed circuit test courses, or both, that cannot be measured practically by surveying techniques. 1.3 Use of this test method requires that the surface of the test course to be measured shall be sufficiently smooth to preclude bounce or hop of the fifth wheel, which will affect the accuracy of the measurement. The normal highway surface is adequate for this test method. 1.4 It is not the intent or scope of this test method to encompass distance measurements of test courses whose surfaces are irregular, broken up, jagged, and so forth, such as rock courses, Belgian block, “rumble” surfaces, and the like. Snow- and ice-covered surfaces also are excluded. 1.5 The values stated in SI units are to be regarded as standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel

KS R ISO 10604-2004(2019) 道路车辆前照灯光束方向测量设备

Road vehicles－Measurement equipment for orientation ofheadlamp luminous beams

KS R ISO 10604:2004 道路车辆.前灯光束定向测量设备

이 규격은 전동 자전거와 오토바이를 제외한 도로 차량에 설치된 전조등으로부터 방출되는 조명

Road vehicles－Measurement equipment for orientation ofheadlamp luminous beams