43.180 检查、维修和试验设备 标准查询与下载

SANS 10372:2003 汽车装修中心

Covers the provisions for automotive fitment centres.

Automotive fitment centres

LST EN 50325-1-2003 基于 ISO 11898（CAN）的控制器-设备接口工业通信子系统 第1部分：一般要求

Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces. Part 1: General requirements

DIN EN 50325-1:2003 符合ISO 11898关于控制器装置接口规定的工业通信子系统.第1部分:一般要求

Defines industrial communication subsystems which are based on ISO 11898. Thus, complete communication systems are defined comprising precise data exchange functionality and support of interoperating devices.#,,#

Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 1: General requirements; German version EN 50325-1:2002, text in English

BS EN 50325-1:2003 根据ISO 11898：控制器装置接口制定的工业通信子系统.一般要求

Industrial communication subsystem based on ISO 11898 (CAN) for controller-device interfaces - General requirements

ISO/TR 10305-2:2003 道路车辆.电磁场强度测量设备的校正.第2部分:9kHz-40GHz的电磁场传感器和探针(不包括天线)的校正用IEEE标准

This part of ISO/TR 10305 specifies techniques for calibrating electromagnetic field sensors and probes, excluding antennas, used in automotive testing for the measurement of magnetic fields at frequencies from 9 kHz to 40 GHz. In the automotive field, these field strength measuring devices are used for measurements specified in the various parts of ISO 11451 and ISO 11452. The scope and field of application are further detailed in clause 1 (see page 9) of the enclosed IEEE standard.

Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz

ISO/TR 10305-1:2003 道路车辆.电磁场强度测量设备的校正.第1部分:频率大于0Hz的电磁场测量设备

This part of ISO/TR 10305 specifies techniques for calibrating field strength measuring devices used in automotive testing for the measurement of electromagnetic fields at frequencies greater than 0 Hz, for both EMC and human protection applications. It has been prepared by German experts using devices including capacitor or coil arrangements, TEM cells and antenna arrangements in absorber-lined chambers. In the automotive field, these field strength measuring devices are used for measurements specified in the various parts of ISO 11451 and ISO 11452.

Road vehicles - Calibration of electromagnetic field strength measuring devices - Part 1: Devices for measurement of electromagnetic fields at frequencies 0 Hz

NF R13-714-1:2002 道路车辆.诊断系统.关键词协议 2000.第1部分:物理层

Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 1 : physical layer.

NF R13-714-2:2002 道路车辆.诊断系统.关键词协议 2000.第2部分:数据链路层

Road vehicles - Diagnostic systems - Keyword Protocol 2000 - Part 2 : data link layer.

DS/EN ISO 15007-1:2002 道路车辆 与运输信息和控制系统相关的驾驶员视觉行为的测量 第1部分：定义和参数

This part of ISO 15007 defines key terms and parameters applied in the analysis of driver visual behaviour. It can be applied in environments from real-world trials to laboratory-based driving simulator studies.

Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters

CNS 4074-2002 汽车用轻便式液压千斤顶

本标准适用于汽车用轻便式液压千斤顶（以下简称千斤顶）。

Portable hydraulic jacks for automobiles

ASME PALDb Addenda-2002 便携式汽车起重设备的安全标准；附加物

Safety standard for portable automotive lifting devices; Addenda

DIN EN 50325-3:2001 控制器装置接口用符合ISO 11898的工业通信子系统.智能分布系统

The document comprises the Smart Distribution System (SDS). It includes industrial contoller-devices interfaces for control systems, factory automation, and commercial process automation.

Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 3: Smart Distributed System (SDS); German version EN 50325-3:2001, text English

SAE J2570-2001 拟人测试设备传感器的性能规范

This SAE Information Report defines the minimum performance specifications for accelerometers, load cells, and angular position transducers used within Anthropomorphic Test Devices (ATDs) when performing impact tests per SAE J211, Instrumentation for Impact Test. This report does not define methodology and equipment for performing verification tests of the transducers. It is intended that any agency proposing to conduct tests in accordance with SAE J211 should be able to demonstrate that the transducers they use would meet the performance requirements specified in this information report. The purpose of this information report is to provide guidelines for choosing accelerometers, load cells, and angular position transducers for use in impact testing. The aim is to provide uniformity in transducer measurements, and provide a basis for meaningful comparisons of test results from different sources.

Performance Specifications for Anthropomorphic Test Device Transducers

KS R 4041-2001(2011) 汽车升降机

Lift for automobiles

KS R 4041-2001 汽车用起重机

이 규격은 자동차의 승강에 사용되는 공기 유압식 리프트(이하, 리프트라 한다.)에 대하여

Lift for automobiles

KS R 0112-1-2001 道路车辆诊断系统关键字协议2000第1部分:物理层

Road vehicles－Diagnostic systems－Keyword protocol 2000－Part 1：Physical layer

KS R 0111-2001 道路车辆诊断系统点火系统试验设备

Road vehicles－Diagnostic systems－Equipment for ignition systems testing

KS R 0112-2-2001 道路车辆诊断系统关键字协议2000第2部分:数据链路层

Road vehicles－Diagnostic systems－Keyword Protocol 2000－Part 2：Data link layer

KS R 0112-3-2001 道路车辆诊断系统关键字协议2000第3部分:应用层

Road vehicles－Diagnostic systems－Keyword protocl 2000－Part 3：Application layer

NF C46-660-3*NF EN 50325-3:2001 基于 ISO 11898 (CAN) 的控制装置接口用工业通信子系统.第3部分:智能分布系统

Industrial communications subsystem based on ISO 11898 (CAN) for controller-device interfaces - Part 3 : Smart Distributed System (SDS).