45.060.10 机车 标准查询与下载
共找到 471 条与 机车 相关的标准，共 32 页
This European Standard is applicable to railway vehicle driving cabs which are air-conditioned or heated/ventilated. These include:- locomotives;- mainline, suburban and regional vehicles;- urban vehicles such as metros and trams.This European Standard does not consider the special operational requirements of shunt locomotives.This European Standard specifies the comfort parameters for the driving cab to ensure driver comfort which helps safe operation.The conditions under which the physical parameters mentioned in this European Standard shall be measured are defined in EN 14813-2.
Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters
- ICS
- 45.060.10
- CCS
- 发布
- 2011-01-21
- 实施
- 2011-01-21
Railway applications - Air conditioning for driving cabs - Part 1 : comfort parameters.
- ICS
- 45.060.10
- CCS
- S35
- 发布
- 2011-01-01
- 实施
- 2011-01-01
Main-line diesel locomotives. General technical requirements
- ICS
- 45.060.10
- CCS
- 发布
- 2011-01-01
- 实施
- 2012-06-01
Railway applications - Air conditioning for driving cabs - Part 2: Type tests; German version EN 14813-2:2006+A1:2010
- ICS
- 45.060.10
- CCS
- S40
- 发布
- 2011-01
- 实施
State of the railway vehicles - Control and instrumentation technology - Part 207-10: Speed measurement and display equipment
- ICS
- 45.060.10
- CCS
- S61;S04
- 发布
- 2011-01
- 实施
- 2011-01-01
Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters; German version EN 14813-1:2006+A1:2010
- ICS
- 45.060.10
- CCS
- S40
- 发布
- 2011-01
- 实施
State of the railway vehicles - Control and instrumentation technology - Part 207-5: Driver?s safety device (DSD)
- ICS
- 45.060.10
- CCS
- S61
- 发布
- 2011-01
- 实施
- 2011-01-01
Standard for dc Traction Power System Field Testing and Acceptance Criteria for System Applications up to 1500 Volts dc Nominal
- ICS
- 45.060.10
- CCS
- S80
- 发布
- 2011
- 实施
Dependability of railway traction rolling stock. Terms and definitions
- ICS
- 45.060.10
- CCS
- 发布
- 2011
- 实施
- 2012-07-01
Shunting diesel locomotives. General technical requirements
- ICS
- 45.060.10
- CCS
- 发布
- 2011
- 实施
- 2012-01-01
Railway bus. General technical requirements
- ICS
- 45.060.10
- CCS
- 发布
- 2011
- 实施
- 2013-07-01
本标准规定了机车用电热防寒装置的术语和定义、技术要求、检验方法、检验规则及标志、包装、运输和储存等。 本标准适用于各型机车阀类和管路系统用电热装置的设计、制造和检验，亦适用于动车及其他自轮运转设备。
Electrical heating cold-resistant device for locomotive
- ICS
- 45.060.10
- CCS
- S40
- 发布
- 2010-12-02
- 实施
- 2011-06-01
本标准规定了铁道货车用合成闸瓦的术语、定义和符号、技术要求、检查试验方法、检验规则、标志、包装、运输及贮存要求等。 本标准适用于最高运行速度为120km/h,轴重不大于25t的铁道货车用合成闸瓦。轴重大于25t的铁道货车用合成闸瓦可参照使用本标准。
Brake shoes for freight rolling stock of railways
- ICS
- 45.060.10
- CCS
- S33
- 发布
- 2010-12-02
- 实施
- 2011-06-01
Railway applications - Rolling stock - Pantographs: Characteristic tests - Part 1: Pantographs for main line vehicles; German version EN 50206-1:1998, Corrigendum to DIN EN 50206-1 (VDE 0115-500-1):1999-02; German version CENELEC-Cor.:2010 to EN 50206-1:1
- ICS
- 45.060.10
- CCS
- 发布
- 2010-11
- 实施
This European Standard is applicable to railway vehicle driving cabs which are air-conditioned or heated/ventilated. These include: locomotives; mainline, suburban or regional vehicles; urban vehicles such as metros and trams. This European Standard does not consider the special operational requirements of shunt locomotives. This European Standard specifies the comfort parameter measurement methods for driving cabs. The comfort parameters and their tolerances cited in this European Standard are defined in EN 14813-1.
Railway applications - Air conditioning for driving cabs - Part 2: Type tests
- ICS
- 45.060.10
- CCS
- S04
- 发布
- 2010-11
- 实施
Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
- ICS
- 45.060.10
- CCS
- S30
- 发布
- 2010-11
- 实施
Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system (IEC 61377-1:2006); German version EN 61377-1:2006, Corrigendum to DIN EN 61377-1 (VDE 0115-403-1):2006-12; German version
- ICS
- 45.060.10
- CCS
- S35
- 发布
- 2010-11
- 实施
本标准规定了机车、动车用柴油机活塞销的技术要求、检验方法、检验规则及标志、包装、运输和贮存要求。 本标准适用于机车、动车用柴油机活塞销的设计、制造和验收。
Component parts of diesel engine for locomotive and diesel railcar.Piston pin
- ICS
- 45.060.10
- CCS
- S42
- 发布
- 2010-08-22
- 实施
- 2011-02-01
本标准规定了铁路内燃机车柴油机喷油泵试验台型式与基本参数、技术要求、试验方法和检验规则。 本标准适用于铁路内燃机车柴油机喷油泵进行常规校验用的试验台。
Fuel injection pump tester of locomotive diesel engine
- ICS
- 45.060.10
- CCS
- S39
- 发布
- 2010-08-22
- 实施
- 2011-02-01
本标准规定了机车用门锁（以下简称门锁）的技术要求、试验方法及检验规则，产品标志、包装、运输和贮存等。 本标准适用于内燃机车和电力机车内部间隔门用的门锁（简称为内门锁）以及机车连通外界的车门用门锁（简称为外门锁）的设计、制造和验收。内燃动车用门锁也可参照本标准执行。
Door lock for locomotive
- ICS
- 45.060.10
- CCS
- S42
- 发布
- 2010-08-22
- 实施
- 2011-02-01
