45.060.10 机车 标准查询与下载
共找到 471 条与 机车 相关的标准，共 32 页
本标准规定了内燃机车柴油机调速系统（以下简称调速系统）的术语和定义、技术要求、试验方法、检验规则。 本标准适用于调速系统的设计、制造和验收。内燃动车用柴油机调速系统也可参照本标准执行。
Technical specifications of speed-governing system of diesel engine for locomotive
- ICS
- 45.060.10
- CCS
- S42
- 发布
- 2010-08-22
- 实施
- 2011-02-01
本标准规定了铁路内燃、电力机车制动机试验台的珐术要求、试验方法、检验规则及标志、包装、运输、贮存等。 本标准适用于内燃机车JZ-7型制动机、电力机车DK-1型制动机的性能试验，其他类型机车制动机试验台可参照执行。
Technical specification for locomotive brake tester
- ICS
- 45.060.10
- CCS
- S39
- 发布
- 2010-08-22
- 实施
- 2011-02-01
本标准规定了内燃机车柴油机用高压油管（含两端连接件）技术要求、试验方法、检验规则以及标志、包装、运输、贮存等要求。 本标准适用于内燃机车柴油机用高压油管的设计、制造和验收。内燃动车柴油机用高压油管也可参照使用。
High-pressure fuel ejection pipe for diesel locomotive engine
- ICS
- 45.060.10
- CCS
- S42
- 发布
- 2010-08-22
- 实施
- 2011-02-01
Railway applications - Electronic equipment used on rolling stock
- ICS
- 45.060.10
- CCS
- 发布
- 2010-07-16
- 实施
- 2010-07-16
This Technical Specification is applicable to high voltage (HV) bushings, intended for use in traction transformers of rail vehicles, cooled by insulating liquid with rated voltages up to 25 kV single phase and rated currents up to 630 A at frequencies from 16,7 Hz to 60 Hz. HV bushings within the scope of this Technical Specification are bushings for separable connectors that connect the power supply coming from a contact wire or from a contact rail to the primary winding of the traction transformer. The Technical Specification only deals with HV bushings that are mounted to the transformer.CLC/TS 50537-1 gives consideration to both technical and normative
Railway applications - Mounted parts of the traction transformer and cooling system - Part 1: HV bushing for traction transformers
- ICS
- 45.060.10
- CCS
- 发布
- 2010-05-25
- 实施
- 2010-05-25
This Technical Specification covers gas and liquid actuated (Buchholz) relays for liquid immersed transformers and reactors with conservator for rail vehicles.The device is intended to detect• gas release from the unit to be protected,• cooling liquid surge from the protected unit to the conservator,• complete loss of the cooling liquid in the conservator.This Technical Specification gives consideration to both technical and normative requirements of the railway environment and restricts the variety in particular provided by the industry-wide standardEN 50216-2. It determines requirements and tests enabling the interchangeability of Buchholz relays by defin
Railway applications - Mounted parts of the traction transformer and cooling system - Part 4: Gas and liquid actuated (Buchholz) relay for liquid immersed transformers and reactors with conservator for rail vehicles
- ICS
- 45.060.10
- CCS
- 发布
- 2010-05-25
- 实施
- 2010-05-25
This Technical Specification covers requirements for centrifugal and peripheral electric pumps which generate the circulation of cooling liquid in converters of rail vehicles and their associated cooling system.The pumps covered in this Technical Specification are rotodynamic pumps driven by canned motors or magnetically coupled motors.CLC/TS 50537-3 gives consideration to both technical and normative requirements of the railway environment and restricts the variety provided by industry-wide standards for pumps (for example EN 50216-7, EN 733 and EN ISO 9906). It determines requirements and tests enabling the interchangeability especially regarding electric
Railway applications - Mounted parts of the traction transformer and cooling system - Part 3: Water pump for traction converters
- ICS
- 45.060.10
- CCS
- 发布
- 2010-05-03
- 实施
- 2010-05-03
This Technical Specification covers requirements for electric pumps which generate the circulation of insulation liquid in traction transformers and reactors of rail vehicles and their associated cooling system.The pumps covered by this Technical Specification are rotodynamic pumps driven by a squirrel cage induction motor which is immersed in the insulating liquid. CLC/TS 50537-2 gives consideration to both technical and normative requirements of the railway environment and restricts the variety provided by industry-wide standards for pumps (for example EN 50216-7 and EN ISO 9906). It determines requirements and tests enabling the interchangeability especi
Railway applications - Mounted parts of the traction transformer and cooling system - Part 2: Pump for insulating liquid for traction transformers and reactors
- ICS
- 45.060.10
- CCS
- 发布
- 2010-05-03
- 实施
- 2010-05-03
本标准规定了机车车辆用继电器和接触器的可靠性试验的一般要求和方法，包括继电器和接触器的可靠性等级要求、试验方法、验证试验方案及试验程序等。 本标准适用于机车车辆(含动车组)使用的继电器和接触器的可靠性试验，城轨车辆上使用的继电器和接触器可参照执行。
General rules for reliability test on board relays and contactors
- ICS
- 45.060.10
- CCS
- S36
- 发布
- 2010-04-27
- 实施
- 2010-10-01
本标准规定了工矿内燃机的型式、基本参数、技术要求、试验方法、检验规则、标志、发运和贮存。 本标准适用于工厂、矿山、地方铁路、调车场、建筑工地、港口码头、森林铁路、地下工程等使用的准轨及窄轨工矿内燃机车(以下简称机车)。
Industrial and mining diesel locomatives
- ICS
- 45.060.10
- CCS
- S46
- 发布
- 2010-02-11
- 实施
- 2010-07-01
Machines and trains for removing pollutants, snow and ice from the railway track. General technical requirements
- ICS
- 45.060.10
- CCS
- 发布
- 2010
- 实施
- 2011-07-01
Cardan shafts of traction drive of diesel locomotives and diesel trains. General specifications
- ICS
- 45.060.10
- CCS
- 发布
- 2010
- 实施
- 2011-09-01
Special railway rolling stock. General technical requirements
- ICS
- 45.060.10
- CCS
- 发布
- 2010
- 实施
- 2011-07-01
Tractive railway rolling stock. Springs of spring suspensions
- ICS
- 45.060.10
- CCS
- 发布
- 2010
- 实施
- 2011-07-01
Federal regulations require the testing of sound emissions from horns located on railroad locomotives. This Standard specifies an alternate method for compliance with the Federal requirements in metropolitan areas where tests cannot be conducted in an outdoor space free of obstructions. The data that result from this procedure are equivalent to those that derive from the procedure promulgated by the Federal Railroad Administration as described in 49 CFR Part 229.129.
Procedure for Testing Railroad Horns ex situ
- ICS
- 45.060.10
- CCS
- S40
- 发布
- 2010
- 实施
本标准规定了由石蜡基基础油和多种添加剂调制成的铁路内燃机车柴油机油(含锌油)的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于铁路内燃机车柴油机油。
Diesel engine oils for railway diesel locomotives
- ICS
- 45.060.10
- CCS
- S42
- 发布
- 2009-11-11
- 实施
- 2010-05-01
本标准规定了电力机车控制电源柜试验台的技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于直流110V机车控制电源柜试验用试验台。
Test device for control power sypply of electric locomotive
- ICS
- 45.060.10
- CCS
- S38
- 发布
- 2009-11-11
- 实施
- 2010-05-01
本部分规定了机车、动车用风笛的技术要求、试验条件、试验项目及方法、检验规则、标志、包装、运输和贮存等。 本部分适用于各型机车和动车用风笛的设计、制造及产品检验。
Electric horn and air whistle for locomotive and power car.Part 2:air whistle
- ICS
- 45.060.10
- CCS
- S42
- 发布
- 2009-11-11
- 实施
- 2010-05-01
本部分规定了机车、动车用电笛的技术要求、试验条件、试验项目及方法、检验规则、标志、包装、运输和贮存等。 本部分适用于各型机车和动车用电笛的设计、制造及产品检验。
Electric horn and air whistle for locomotive and power car.Part 1:electric horn
- ICS
- 45.060.10
- CCS
- S42
- 发布
- 2009-11-11
- 实施
- 2010-05-01
本标准规定了铁路内燃、电力机车用往复活塞式空气压缩机及往复活塞式空气压缩机电机组、喷油螺杆空气压缩机试验台的技术要求、试验方法和检验规则。 本标准适用于对额定工作压力不大于1000kPa的铁路内燃、电力机车用空压机进行简化性能试验用的试验台。
Test device for air compressor of locomotive
- ICS
- 45.060.10
- CCS
- S38
- 发布
- 2009-11-11
- 实施
- 2010-05-01
