45.060.10 机车 标准查询与下载



共找到 471 条与 机车 相关的标准,共 32

Railway applications - Energy measurement on board trains

ICS
45.060.10
CCS
发布
2008-04-30
实施
2008-04-30

Railway applications. Energy measurement on board trains

ICS
45.060.10
CCS
发布
2008-01-31
实施
2008-01-31

This European Standard applies only to newly manufactured static energy meters of accuracy class 1, for the measurement on board, of alternating current electrical energy or direct current electrical energy used for traction applications operating at the following supply voltages: ? 25 kV (single phase) at 50 Hz, ? 15 kV (single phase) at 16,7 Hz, ? 3 kV, 1,5 kV and 0,75 kV d.c. It applies only to static meters consisting of a measuring element and register(s) enclosed together in a meter enclosure. It does not apply to: a) portable meters; b) data interfaces with on board systems; c) data management system; d) data interfaces with telecommunication system; e) on-board global measurement systems; additionally, if voltage and current transducers are considered of accuracy class 0,5. If these transducers are multi-service, specific and separate outputs will be considered.

Railway applications. Energy measurement on board trains

ICS
45.060.10
CCS
S04
发布
2008-01-31
实施
2008-01-31

Railway traction stock. Methods of controlling braking distance and parking brake

ICS
45.060.10
CCS
S32
发布
2008
实施
2009-01-01

Wheelsets of locomotives and motor-powered units. Strength calculations and tests

ICS
45.060.10
CCS
S40
发布
2008
实施
2009-09-01

Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

ICS
45.060.10
CCS
S40
发布
2008
实施
2009-07-01

Wheelsets for the traction railway stock. Method of measuring the electrical resistance

ICS
45.060.10
CCS
S40
发布
2008
实施
2009-01-01

本标准规定了机车、动车上用于压缩空气干燥净化处理的无热再生吸附式压缩空气干燥器的使用条件、技术要求、质量保证、试验方法及试验规则、产品标志、包装、运输和贮存等。 本标准适用于机车、动车用干燥器。

Absorbent Compressed Air Dryer on Locomotive and Power Car

ICS
45.060.10
CCS
S41
发布
2007-12-30
实施
2008-05-01

Railway applications - Electronic equipment used on rolling stock

ICS
45.060.10
CCS
发布
2007-12-15
实施
2007-12-15

Railway applications - Front windscreens for train cabs.

ICS
45.060.10
CCS
S30
发布
2007-12-01
实施
2007-12-21

Railway applications - Front windscreens for train cabs

ICS
45.060.10
CCS
发布
2007-11-29
实施
2007-11-29

This European Standard specifies the functional requirements for cab windscreens of high speed trains including testing and conformity assessment. The same requirements can be applied to the windscreens of other types of rolling stock if some of the performance criteria are adjusted to suit the application. Such changes should be based on national standards or infrastructure controller""s regulations where they exist.This European Standard does not specify all interfaces between the windscreen and the vehicle.This European Standard does not apply to the renewal of windscreens of high speed rolling stock already in operation.

Railway applications - Front windscreens for train cabs

ICS
45.060.10
CCS
发布
2007-11-12
实施
2007-11-12

This European Standard specifies the functional requirements for cab windscreens of high speed trains including testing and conformity assessment.The same requirements can be applied to the windscreens of other types of rolling stock if some of the performance criteria are adjusted to suit the application.Such changes should be based on national standards or infrastructure controller's regulations where they exist. This European Standard does not specify all interfaces between the windscreen and the vehicle. This European Standard does not apply to the renewal of windscreens of high speed rolling stock already in operation.

Railway applications - Front windscreens for train cabs; German version DIN EN 15152:2007

ICS
45.060.10
CCS
S30;Q30
发布
2007-11
实施

This standard applies to all electronic equipment for control, regulation, protection, supply, etc., installed on rail vehicles and associated with:- either the accumulator battery of the vehicle;- or a low voltage power supply source with or without a direct connection to the contact system(transformer, potentiometer device, auxiliary supply);with the exception of electronic power circuits, which conform to EN 50207.This standard covers the conditions of operation, design, construction, and testing of electronicequipment, as well as basic hardware and software requirements considered necessary for competent, reliable equipment.Additional requirements in ot

Railway applications - Electronic equipment used on rolling stock

ICS
45.060.10
CCS
发布
2007-10-15
实施
2007-10-15

Railway applications - External visible and audible warning devices for high speed trains - Part 1: Head, marker and tail lamps

ICS
45.060.10
CCS
发布
2007-09-28
实施
2007-09-28

This European Standard specifies the functional requirements for cab windscreens of high speed trains including testing and conformity assessment. The same requirements can be applied to the windscreens of other types of rolling stock if some of the performance criteria are adjusted to suit the application. Such changes should be based on national standards or infrastructure controller’s regulations where they exist. This European Standard does not specify all interfaces between the windscreen and the vehicle. This European Standard does not apply to the renewal of windscreens of high speed rolling stock already in operation.

Railway applications - Front windscreens for train cabs

ICS
45.060.10
CCS
S05;Q34
发布
2007-09-28
实施
2007-09-28

Railway applications - External visible and audible warning devices for high speed trains - Part 2: Warning horns

ICS
45.060.10
CCS
发布
2007-09-17
实施
2007-09-17

本标准规定了工矿电机车(以下简称电机车)中各系列产品型号的编制和管理办法,作为命定产品型号的统一规定。 本标准适用于工矿企业用的各类电机车产品。 本标准不适用于煤矿井下用电机车产品。

Drawing-up aud management methods of mine electric locomotive models

ICS
45.060.10
CCS
S45;K63
发布
2007-08-28
实施
2008-02-01

本标准规定了铁路机车滚动轴承的术语定义、代号及外形尺寸、技术要求、检查方法、检验规则、保用期、标志、包装及贮存等。 本标准适用于铁路机车用各类滚动轴承的订货、生产、检验和用户验收。

Specification for rolling bearing of rail-locomotive for booking

ICS
45.060.10
CCS
S34
发布
2007-08-13
实施
2007-12-01

本标准规定了内燃机车定置性能(牵引热工部分)试验的试验项目、试验设备、试验要求、测量参数、试验方法。 本标准适用于铁路用1435mm标准轨距,以柴油机为动力的电力传动内燃机车(以下简称机车)。其他轨距的内燃机车及液力传动内燃机车、工矿用内燃机车可参照使用。

Test method of the diesel locomotive at standstill

ICS
45.060.10
CCS
S42
发布
2007-08-13
实施
2007-12-01



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号