45.060.10 机车 标准查询与下载



共找到 471 条与 机车 相关的标准,共 32

本标准规定了内燃机车牵引性能试验的试验项目、试验设备、试验要求、测量参数、试验方法。 本标准适用于铁路用1435mm标准轨距,以此油机为动力的电力传动和液力传动内燃机车(以下简称机车)。其他轨距内燃机车及工矿用内燃机车可参照使用。

Test method of the diesel locomotive tractive performance

ICS
45.060.10
CCS
S42
发布
2007-08-13
实施
2007-12-01

本标准规定了机车、动车用柴油机曲轴振减振器(以下简称减振器)的产品结构型式、技术要求、试验方法、检验规则、质量保证期、标志、包装、运输和贮存等。 本标准适用于机车、动车用柴油机曲轴扭振减振器。

Component partsof diesel engine for locomotive and car Crankshaft torsion vibration damper

ICS
45.060.10
CCS
S33
发布
2007-08-13
实施
2007-12-01

本标准规定了机车、动车用前窗玻璃的技术要求、试验方法、检验规则、标志、包装和运输。 本标准适用于机车、动车用前窗玻璃的设计、生产和验收。

Foreside windscreen for locomotives and motor units

ICS
45.060.10
CCS
S05
发布
2007-08-13
实施
2007-12-01

This European Standard specifies the functional requirements for cab windscreens of high speed trains including testing and conformity assessment.The same requirements can be applied toThe windscreens of other types of rolling stock if some of the performance criteria are adjusted to suitThe application. Such changes should be based on national standards or infrastructure controller's regulations whereThey exist.This European Standard does not specify all interfaces betweenThe windscreen andThe vehicle.This European Standard does not apply toThe renewal of windscreens of high speed rolling stock already in operation.

Railway applications - Front windscreens for train cabs

ICS
45.060.10
CCS
发布
2007-08-01
实施

This European Standard defines, operational and technical requirements for warning horns for high speed trains, including the requirements for testing and conformity assessment.

Railway applications - External visible and audible warning devices for high speed trains - Part 2: Warning horns; English version of DIN EN 15153-2:2007-08

ICS
45.060.10
CCS
S61
发布
2007-08
实施

This European Standard defines the functional, operational and technical requirements for head, marker and tail lamps for high speed trains, including the requirements for testing and conformity assessment.

Railway applications - External visible and audible warning devices for high speed trains - Part 1: Head, marker and tail lamps; English version of DIN EN 15153-1:2007-08

ICS
45.060.10
CCS
S61
发布
2007-08
实施

This European Standard defines the functional, operational and technical requirements for warning horns for high speed trains, including the requirements for testing and conformity assessment.

Railway applications - External visible and audible warning devices for high speed trains - Warning horns

ICS
45.060.10
CCS
S61
发布
2007-06-29
实施
2007-06-29

This European Standard defines the functional, operational and technical requirements for head, marker and tail lamps for high speed trains, including the requirements for testing and conformity assessment.

Railway applications - External visible and audible warning devices for high speed trains - Head, marker and tail lamps

ICS
45.060.10
CCS
S61
发布
2007-06-29
实施
2007-06-29

本标准规定了内燃机车用轴流式冷却风扇(以下简称冷却风扇)的技术要求、试验方法、检验规则以及标志、包装、运输、贮存等要求。 本标准适用于内燃机车用新造冷却风扇。内燃动车及发电机组用冷却风扇也可参照本标准执行。

Cooling fan for locomotive

ICS
45.060.10
CCS
S42
发布
2007-04-23
实施
2007-10-01

本标准规定了电力机车制动机(以下简称“机车制动机”)的使用条件、一般要求、基本要求、技术性能和检验规则。 本标准适用于新造电力机车(以下简称“机车”)用机车制动机。

Technical specification of brake for electric locomotive

ICS
45.060.10
CCS
S32
发布
2007-04-23
实施
2007-10-01

本标准规定了机车单元制动器的技术要求、试验方法,检验规则,标志、包装、贮存及运输等。 本标准适用于机车踏面单元制动器(以下简称“机车单元制动器”)的制造、试验与验收。

Locomotive brake unit

ICS
45.060.10
CCS
S32
发布
2007-04-23
实施
2007-10-01

本部分规定了DK-1型机车电空制动机的单机性能以及制动机的试验方法。 本部分适用于新造机车用DK-1型机车电空制动机(以下简称“制动机”)单机性能的检查与验收。

DK-1 Electro-pneumatic brake for electric locomotives Part 1: Single unit performance test

ICS
45.060.10
CCS
S32
发布
2007-04-23
实施
2007-10-01

本部分规定了DK-1型机车电空制动机的空气制动阀、分配阀、紧急阀、电动放风阀、安全阀等性能要求及在试验台上的检验方法。 本部分适用于DK-1型机车电空制动机的空气制动阀、分配阀、紧急阀、电动放风阀、安全阀等的性能试验。

DK-1 Electro-pneumatic brake for electric locomotives Part 2: Test standard of single valve

ICS
45.060.10
CCS
S32
发布
2007-04-23
实施
2007-10-01

本标准规定了内燃机车用机油热交换器(以下简称“热交换器”)的技术要求、试验方法、检验规则以及标志、包装、运输和贮存的要求。 本标准适用于内燃机车新造热交换器(包括管壳式、板式),液力传动油、静液压油及燃油热交换器也可参照执行。

Lubricating oil heat exchanger for diesel locomotive

ICS
45.060.10
CCS
S42
发布
2007-04-23
实施
2007-10-01

Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system (IEC 61377-1:2006); German version EN 61377-1:2006

ICS
45.060.10
CCS
S35
发布
2006-12
实施
2006-12-01

本标准规定了铁路电传动内燃机车水阻负载试验设备的技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本标准适用于交一直电传动内燃机车的水阻负载试验设备(以下简称水阻负载试验设备)。

Technical specifications for water. resistance loaded test equipment of diesel electric locomotive

ICS
45.060.10
CCS
S39
发布
2006-11-29
实施
2007-05-01

本标准规定了机车电动落轮机的技术要求、试验方法、检验规则、标志、包装、运输及贮存等。 本标准适用于标准轨距铁路机车检修落轮作业用的电动落轮机(以下简称落轮机)。

Locomotive electric floor wheel machine

ICS
45.060.10
CCS
S39
发布
2006-11-29
实施
2007-05-01

This European Standard is applicable to railway vehicle driving cabs which are air-conditioned or heated/ventilated. These include: — locomotives; — mainline, suburban and regional vehicles; — urban vehicles such as metres and trams. This European Standard does not consider the special operational requirements of shunt locomotives. This European Standard specifies the comfort parameters for the driving cab to ensure driver comfort which helps safe operation. The conditions under which the physical parameters mentioned in this European Standard shall be measured are defined in EN 14813-2.

Railway applications - Air conditioning for driving cabs - Part 1: Comfort parameters; English version of DIN EN 14813-1:2006-10

ICS
45.060.10
CCS
S40
发布
2006-10
实施

Railway applications. Air conditioning for driving cabs. Comfort parameters

ICS
45.060.10
CCS
S35
发布
2006-08-31
实施
2006-08-31

This European Standard is applicable to railway vehicle driving cabs which are air-conditioned or heated/ventilated. These include:  locomotives;  mainline, suburban or regional vehicles;  urban vehicles such as metros and trams. This European Standard does not consider the special operational requirements of shunt locomotives. This European Standard specifies the comfort parameter measurement methods for driving cabs. The comfort parameters and their tolerances cited in this European Standard are defined in EN 14813-1.

Railway applications - Air conditioning for driving cabs - Type tests

ICS
45.060.10
CCS
S30
发布
2006-08-31
实施
2006-08-31



Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号