共找到 663 条与 钢轨和线路构件 相关的标准,共 45 页
This European Standard is applicable to fastening systems, in categories A – C and E as specified in EN 13481-1:2012, 3.1, for use on wood sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1.Table 1 — Fas
Railway applications - Track - Performance requirements for fastening systems - Part 3: Fastening systems for wood sleepers
This European Standard specifies performance requirements for special fastening systems, in categories A - E as specified in EN 13481-1:2012, 3.1, for switches and crossings and check rails. These types of rails are those which are secured within the over
Railway applications - Track - Performance requirements for fastening systems - Part 7: Special fastening systems for switches and crossings and check rails
This European Standard is applicable to fastening systems, in categories A - E (see EN 13481 1:2012, 3.1), for use on concrete sleepers in ballasted track with maximum axle loads and minimum curve radii in accordance with Table 1.Table 1 - Fastening categ
Railway applications - Track - Performance requirements for fastening systems - Part 2: Fastening systems for concrete sleepers
This European Standard specifies the definitions of the terms used in the EN 13146 series and in the EN 13481 series.
Railway applications - Track - Performance requirements for fastening systems - Part 1: Definitions
This European Standard is applicable to fastening systems, in categories A - D as specified in EN 13481 1:2012, 3.1, for attaching rails to the uppermost surface of concrete or asphalt slabs and for embedded rails in non-ballasted tracks, with maximum axl
Railway applications - Track - Performance requirements for fastening systems - Part 5: Fastening systems for slab track with rail on the surface or rail embedded in a channel
This European Standard specifies a laboratory test procedure for determining the clamping force exerted by the fastening system on the foot of a rail by measuring the force to separate the rail foot from its immediate support. It is applicable to systems
Railway applications - Track - Test methods for fastening systems - Part 7: Determination of clamping force
This European Standard specifies a laboratory test procedure for finding the effect of exposure to severe environmental conditions on the fastening system.This test procedure applies to a complete fastening assembly including embedded rail with mechanical
Railway applications - Track - Test methods for fastening systems - Part 6: Effect of severe environmental conditions
This European Standard specifies a procedure for the comparative testing of fastening systems in track. The test procedure is applicable to fastening systems which in all other respects conform to prEN 13481 2:2010, prEN 13481 3:2010, prEN 13481 4:2010, p
Railway applications - Track - Test methods for fastening systems - Part 8: In service testing
This European Standard specifies a laboratory test procedure for determining the electrical resistance, in wet conditions, between the running rails provided by a fastening system fitted to a steel or concrete sleeper, bearer or element of slab track.It i
Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance
This European Standard specifies a laboratory test procedure for applying repeated displacement cycles representative of the displacements caused by traffic on railway track. It is used for assessing the long term performance of direct fastening systems.T
Railway applications - Track - Test methods for fastening systems - Part 4: Effect of repeated loading
This European Standard specifies a laboratory test procedure to determine:a) the maximum longitudinal force that can be applied to a rail, secured to a sleeper, bearer or element of slab track by a rail fastening assembly, without non-elastic displacement
Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint
This European Standard specifies laboratory test procedures for applying an impact to a rail fastened to a concrete sleeper or bearer which simulates the impact loading caused by traffic on railway tracks and measuring the strain induced in the sleeper. T
Railway applications - Track - Test methods for fastening systems - Part 3: Determination of attenuation of impact loads
This European Standard specifies a laboratory test procedure to determine the moment necessary to rotate a rail, secured to a sleeper by a rail fastening assembly, through 1° in a plane parallel to the base of the rail. The value obtained can be used in t
Railway applications - Track - Test methods for fastening systems - Part 2: Determination of torsional resistance
本标准规定了城市轨道交通用聚氨酯泡沫合成轨枕(以下简称合成轨枕)的原材料及合成轨枕使用条件、要求、试验方法、检验规则、产品标识和合格证、包装、运输、贮存。 本标准适用于采用连续拉杆成型工艺制备的聚氨酯泡沫合成轨枕的生产和检验。
Synthetic sleeppers of fiber reinforced polyurethane foam
This European Standard specifies a laboratory test procedure for determining the electrical resistance, in wet conditions, between the running rails provided by a fastening system fitted to a steel or concrete sleeper, bearer or element of slab track. It is also applicable to embedded rail. This test procedure applies to a complete fastening assembly. It is relevant to signalling currents, not to traction currents. A reference procedure and an alternative procedure are included.
Railway applications - Track - Test methods for fastening systems - Part 5: Determination of electrical resistance
This European Standard specifies a laboratory test procedure to determine: a) the maximum longitudinal force that can be applied to a rail, secured to a sleeper, bearer or element of slab track by a rail fastening assembly, without non-elastic displacement of the rail occurring, or b) the longitudinal stiffness at a specified longitudinal displacement of a specimen of embedded rail with an adhesive fastening system.
Railway applications - Track - Test methods for fastening systems - Part 1: Determination of longitudinal rail restraint (Incorporates Amendment A1: 2014)
This European Standard specifies a laboratory test procedure for determining the clamping force exerted by the fastening system on the foot of a rail by measuring the force to separate the rail foot from its immediate support. It is applicable to systems with and without baseplates on all types of sleepers, bearers and elements of slab track. The test does not determine the security of fastening components fixed into the sleeper or other fastening system support. This test procedure applies to a complete fastening assembly. It is not applicable to fastening systems for embedded rail.
Railway applications - Track - Test methods for fastening systems - Part 7: Determination of clamping force
This European Standard specifies a procedure for the comparative testing of fastening systems in track. The test procedure is applicable to fastening systems which in all other respects conform to EN 13481-2:2012, EN 13481-3:2012, EN 13481-4:2012, EN 13481-5:2012 and EN 13481-7:2012. This test applies to complete fastening assemblies. It is only used for comparative testing of such fastening systems installed at the same time on the type of support for which they are intended.
Railway applications - Track - Test methods for fastening systems - Part 8: In service testing
This European Standard specifies a laboratory test procedure to determine the moment necessary to rotate a rail, secured to a sleeper by a rail fastening assembly, through 1° in a plane parallel to the base of the rail. The value obtained can be used in track stability calculations. The test is not applicable to embedded rails.This test procedure applies to a complete fastening assembly.
Railway applications - Track - Test methods for fastening systems - Part 2: Determination of torsional resistance
This European Standard specifies laboratory test procedures for applying an impact to a rail fastened to a concrete sleeper or bearer which simulates the impact loading caused by traffic on railway tracks and measuring the strain induced in the sleeper. They are used for comparing the attenuation of impact loads on concrete sleepers or bearers by different rail pads. A reference procedure and alternative procedure are included. This test is only applicable to ballasted track. These test procedures apply to a complete fastening assembly.
Railway applications - Track - Test methods for fastening systems - Part 3: Determination of attenuation of impact loads
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号