45.080 钢轨和线路构件 标准查询与下载

BS EN 13232-8:2007 轨道交通.轨道.道岔和交叉口.伸缩装置

This part of EN 13232 covers the following subjects: to establish a working terminology for expansion devices, for their constituent parts and for the types; to specify the minimum manufacturing requirements for expansion devices and their constituent parts; to formulate codes of practice for inspection and tolerances; to define the method by which expansion devices and their parts should be identified and traced.

Railway applications — Track — Switches and crossings — Part 8: Expansion devices

JIS E 1203:2007 合成钢轨枕.由纤维增强泡沫聚氨酯制造

この規格は，ガラス長繊維及び硬質発泡ウレタンで構成される材料を，まくらぎ形状に成形した線路用の合成まくらぎについて規定する。

Synthetic sleepers -- Made from fiber reinforced foamed urethane

ISO 6305-2:2007 铁路部件——交货技术要求第2部分:非合金碳钢底板

This part of ISO 6305 specifies the quality requirements of the product and the conditions of acceptance testing for rolled non-alloy carbon steel baseplates for use with flat-bottom railway rails.

Railway components — Technical delivery requirements — Part 2: Non-alloy carbon steel baseplates

GOST 31334-2007 1520mm铁道车辆的轴.规范

Axles for rolling stock of 1520 mm gauge railways. Specifications

KS R 9106-2006(2016) 铁轨

Rails

KS R 9106-2006 普通铁轨

이 규격은 선로에서 사용하는 보통 레일(이하 레일이라 한다.)에 대하여 규정한다.

Rails

DS/EN 14730-2:2006 铁路应用 轨道 铁轨的铝热焊 第2部分：铝热焊工的资格、承包商的批准和焊缝的验收

This standard applies to aluminothermic welds made on Vignole rails of 46 kg/m and above as contained in EN 13674-1:This standard specifies:- the system for training, testing and maintaining the skills of aluminothermic welders. It applies to those aluminothermic welding processes compliant with the requirements of EN 14730-1 """"Railway applications - Track - Aluminothermic welding of rails - Part 1: Approval of welding processes"""". It requires that the system for training and testing of welders shall be approved by the relevant railway authority;- the systems and requirements for the approval of aluminothermic welding contractors. It applies to those co

Railway applications - Track - Aluminothermic welding of rails - Part 2: Qualification of aluminothermic welders, approval of contractors and acceptance of welds

BS EN 14811:2006 轨道交通.轨道.专用钢轨.凹槽和相关设施

This European Standard specifies requirements for grooved rails and associated construction rail profiles for grooved rail facilities with a linear mass of 42 kg/m and upwards for use in tram transport systems. NOTE Grooved rails are also used for harbour and industrial tracks. Six pearlitic steel grades are specified in a hardness range between 200 HBW and 390 HBW. The rails are either non-heat-treated or heat-treated and are made from non-alloyed (C-Mn) steel in both cases. This standard specifies 18 specific grooved rail profiles and 7 specific construction rail profiles. The grooved rail profiles can also be used as construction elements in switches and crossings. Two grooved rail classes are specified differing in requirements for profile tolerances.

Railway applications - Track - Special purpose rail - Grooved and associated construction

EN 14811:2006 轨道交通.轨道.专用钢轨.凹槽和相关设施.包含修改件2009

This European Standard specifies requirements for grooved rails and associated construction rail profiles for grooved rail facilities with a linear mass of 42 kg/m and upwards for use in tram transport systems. NOTE Grooved rails are also used for harbour and industrial tracks. Six pearlitic steel grades are specified in a hardness range between 200 HBW and 390 HBW. The rails are either non-heat-treated or heat-treated and are made from non-alloyed (C-Mn) steel in both cases.This standard specifies 18 specific grooved rail profiles and 7 specific construction rail profiles. The grooved rail profiles can also be used as construction elements in switches and crossings. Two grooved rail classes are specified differing in requirements for profile tolerances.

Railway applications - Track - Special purpose rail - Grooved and associated construction (Incorporates Amendment A1: 2009)

DIN EN 13232-9:2006 轨道交通.轨道.铁道侧线和道岔口.第9部分:布局

Railway applications - Track - Switches and crossings - Part 9: Layouts; English version of DIN EN 13232-9:2006-08

DS/EN 13481-8:2006 铁路应用 轨道 紧固系统的性能要求 第8部分：重轴负载轨道的紧固系统

This European Standard is applicable to fastening systems for use on concrete, wood and steel sleepers in main line ballasted track having a radius of curvature greater than 80 m and subject to a maximum design axle load of 350 kN.The requirements apply to:¾ direct fastening systems and systems which incorporate a baseplate;¾ fastening systems for the rail sections in EN 13674-1 and EN 13674-4.This European Standard is not applicable to fastening systems for other rail sections, rigid fastening systems or special fastening systems used at bolted joints.This European Standard is for type approval of a complete fastening assembly only.

Railway applications - Track - Performance requirements for fastening systems - Part 8: Fastening systems for track with heavy axle loads

LST EN 13231-1-2006 铁路应用 轨道 工程验收 第1部分：有砟轨道上的工程 平线

Railway applications - Track - Acceptance of works - Part 1: Works on ballasted track - Plain line

LST EN 13231-2-2006 铁路应用 轨道 工程验收 第2部分：有砟轨道工程 道岔和交叉路口

Railway applications - Track - Acceptance of works - Part 2: Works on ballasted track - Switches and crossings

KS R 9202-2006(2016) 铁路车辆部件耐湿性和耐降雨性试验方法

Railway rolling stock parts－Test methods of resistibility for moisture and rainfall

KS R 9170-2006 铁路岔道编号

이 규격은 보통 레일을 사용하는 철도용 분기 기류의 번호에 대하여 규정한다.

Turnout number

KS R 9202-2006 铁路车辆零配件.耐潮和耐雨水试验方法

이 규격은 철도 차량 부품(이하 부품이라 한다.)의 내습 및 내수 시험 방법에 대하여 규정

Railway rolling stock parts－Test methods of resistibility for moisture and rainfall

KS R 9170-2006(2016) 投票数

Turnout number

NF F52-010-7:2006 轨道交通.铁轨.道岔和交叉口.第7部分:带移动部件交叉口

Railway applications - Track - Switches and crossings - Part 7 : crossings with moveable parts.

BS EN 13674-4:2006 轨道交通.轨道.铁轨.27kg/m~46kg/m(但不包括46kg/m)的丁字形铁轨

This part of EN 13674 specifies flat bottom Vignole railway rails from 27 kg/m to, but excluding 46 kg/m. Five pearlitic steel grades are specified covering a rail hardness range of 200 HBW to 390 HBW and include non-heat-treated non-alloy steels, non-heat-treated alloy steels and heat-treated non-alloy steels. There are 13 rail profiles specified in this European Standard, but these may not be available in all steel grades.

Railway applications - Track - Rail - Vignole railway rails from 27 kg/m to, but excluding 46 kg/m

BS EN 13674-2:2006 轨道交通.轨道.铁轨.用于≥46kg/m与丁字形铁轨连接的转辙器和交叉铁轨

This part of EN 13674 specifies switch and crossing rails that carry railway wheels. These are used in conjunction with Vignole railway rails. This part of this standard is not applicable for the check rails that do not carry railway wheels. Eight pearlitic steel grades are specified covering a hardness range of 200 HBW to 390 HBW and include non heat treated non-alloy steels, non heat treated alloy steels, heat treated non-alloy steels and heat treated low alloy steels. There are 30 rail profiles specified in this standard, but they may not all be available in all steel grades. Rails specified in EN 13674-1 may also be used as switch and crossing rails and if so used they shall comply with the requirements of EN 13674-1.

Railway applications - Track - Rail - Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above