共找到 663 条与 钢轨和线路构件 相关的标准,共 45 页
This part of EN 13674 specifies switch and crossing rails that carry railway wheels. These are used in conjunction with Vignole railway rails. This part of this standard is not applicable for the check rails that do not carry railway wheels. Eight pearlitic steel grades are specified covering a hardness range of 200 HBW to 390 HBW and include non heat treated non-alloy steels, non heat treated alloy steels, heat treated non-alloy steels and heat treated low alloy steels. There are !34 rail profiles" specified in this standard, but they may not all be available in all steel grades. Rails specified in EN 13674-1 may also be used as switch and crossing rails and if so used they shall comply with the requirements of EN 13674-1.
Railway applications. Track.Rail. Part 2: Switch and crossing rails used in conjunction with Vignole railway rails 46 kg/m and above
本标准规定了HDGY型和WJK型钢轨固定装置和SGL型钢轨对接装置的型式、尺寸、技术要求、验收规则、标志、包装与贮存。 本标准适用于YB/(T)68规定的38kg/m,43kg/m,50kg/m铁路用钢轨和YB/T 5055规定的QU70、QU80、QU100、QU120起重机钢轨的固定和对接。
Permanent unit of steel rails
The scope of this part is: to describe the design process of switches and crossings, and the use of the other parts of this standard; to define the main criteria to be taken into account during the design of the layout, including the safety and functional dimensions as well as geometrical and material aspects; to define the main criteria to be verified during the design approval; to define the geometrical and non-geometrical acceptance criteria for inspection of layouts assembled both in the fabrication plant and at track site in case of layouts that are delivered non or partially assembled or in a "kit" form; to determine the limits of supply; to define the minimum requirements for traceability.This European Standard applies only to layouts that are assembled in the manufacturing plant or that are assembled for the first time at trackside. Other aspects such as installation and maintenance also influence performance; these are not considered as part of this European Standard.
Railway applications - Track - Switches and crossings - Part 9: Layouts (Incorporates Amendment A1: 2011)
本标准规定了时速200km及以下客货共线铁路既有型号道岔直向和侧向容许通过速度。 本标准适用于75kg/m、60kg/m、50kg/m和43kg/m钢轨的主要型号道岔。 本标准未列出的其他型号道岔的容许通过速度按设计图和规定执行。
The allowed crossing speed for the railway turnouts
This part of EN 13674 specifies flat bottom Vignole railway rails from 27 kg/m to, but excluding 46 kg/m. Five pearlitic steel grades are specified covering a rail hardness range of 200 HBW to 390 HBW and include non-heat-treated non-alloy steels, non-heat-treated alloy steels and heat-treated non-alloy steels. There are 13 rail profiles specified in this European Standard, but these may not be available in all steel grades.
Railway applications - Track - Rail - Part 4: Vignole railway rails from 27 kg/m to, but excluding 46 kg/m Incorporates Amendment A1: 2009
This translation has been made based on the Amendment to the original Japanese Industrial Standard revised by the Minister of Economy,Trade and Industry through deliberations at the Japanese Industrial Standards Committee in accordance with the Industrial Standardization Law. Consequently, JIS E1101-2001 is partially replaced with this Amendment.
Flat bottom railway rails and special rails for switches and crossings of non-treated steel (Amendment 1)
This translation has been made based on the Amendment to the original Japanese Industrial Standard revised by the Minister of Economy, Trade and Industry through deliberations at the Japanese Industrial Standards Committee in accordance with the Industrial Standardization Law. Consequently, JIS E1102-2001 is partially replaced with this Amendment.
Fish plates for rails (Amendment 1)
Electric traction overhead lines -- Fittings (Amendment 1)
Insulating materials of insulated rail joint -- Test methods (Amendment 1)
The scope of this part is: to establish a working terminology for crossings with moveable parts, which means crossings with moveable parts to close the gap of the running edge, and their constituent parts, and identify the main types; to list the minimum informative requirements for the manufacture of crossings with moveable parts and/or their constituent parts; to formulate codes of practice for inspection and tolerances for crossings with moveable parts and/or their constituent parts; to establish the limits and extent of supply; to list the method by which crossings with moveable parts and their constructional parts should be identified and traced; to list the different and varying ways by which crossings with moveable parts can be described, using the following parameters: geometry of crossings; types of construction; performance requirements; design criteria; tolerances and inspection.
Railway applications - Track - Switches and crossings - Part 7: Crossings with moveable parts (Incorporates Amendment A1: 2011)
이 규격은 홈붙이 경동 트롤리선(이하 트롤리선이라 한다.)에 대하여 적용한다.
Hard-drawn copper grooved trolley wires
This European Standard determines the interface between moveable parts and the actuation, locking and detection equipment, and defines the basic criteria of switches and crossing with moveable parts in respect of the interface. It concerns: ~ rules parameters and tolerances for alternative positions of the moveable parts; ~ criteria and limits for the forces which move and restrain the moveable parts.
Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection; English version of DIN EN 13232-4:2006
이 규격은 철도 차량에 이용하는 왕복동식 및 회전식의 공기 압축기(이하, 압축기라 한 다.
Air compressors for railway rolling stock-Test methods
Propeller shafts for railway rolling stock
Test methods for diesel engines for railway rolling stock
이 규격은 철도 차량에 이용하는 분할형 방열 기계(이하, 방열 기계라 한다.)의 검사 방법
Railway rolling stock-Radiator element-Inspection methods
이 규격은 철도 차량에 이용하는 추진축(이하, 추진축이라 한다.)에 대하여 규정한다.
Propeller shafts for railway rolling stock
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号