45.080 钢轨和线路构件 标准查询与下载

KS R 9225-2005(2015) 铁路车辆用空气压缩机试验方法

Air compressors for railway rolling stock－Test methods

KS R 9226-2005 铁路车辆用柴油机试验方法

이 규격은 철도 차량의 구동에 일반적으로 이용하는 디젤 기관(이하, 기관이라 한다.)의 시

Test methods for diesel engines for railway rolling stock

KS R 9229-2005(2015) 铁路车辆散热器元件检验方法

Railway rolling stock－Radiator element－Inspection methods

NF F52-010-5:2005 轨道交通.轨道.铁路侧线和道岔口.第5部分:铁路侧线

Railway applications - Track - Switches and crossings - Part 5 : switches.

EN 13232-4:2005 轨道交通.轨道.铁路侧线和道岔口.第4部分:驱动,锁紧和检测

This European Standard determines the interface between moveable parts and the actuation, locking and detection equipment, and defines the basic criteria of switches and crossing with moveable parts in respect of the interface. It concerns: rules parameters and tolerances for alternative positions of the moveable parts; criteria and limits for the forces which move and restrain the moveable parts.

Railway applications - Track - Switches and crossings - Part 4: Actuation, locking and detection (Incorporates Amendment A1: 2011)

EN 13232-6:2005 轨道交通.轨道.铁道侧线和道岔口.第6部分:固定式普通和钝角道叉口

The scope of this European Standard is to: establish a working terminology for fixed crossings and their constituent parts, and identify the main types; specify the different and varying ways by which crossings can be described using the following parameters: geometry of the crossing; types of construction; design criteria; manufacturing processes; tolerances and inspection.

Railway applications - Track - Switches and crossings - Part 6: Fixed common and obtuse crossings (Incorporates Amendment A1: 2011)

TB/T 3110-2005 33kg/m护轨用槽型钢

本标准规定了33kg/m护轨用槽型钢(以下简称槽型钢)的型式尺寸及其允许偏差、技术要求、试验方法、检验规则、标志和质量证明书等。 本标准适用于铁路道岔用护轨。

33kg/m channel for guardrails

TB/T 3109-2005 AT钢轨

本标准规定了50AT和60AT钢轨(以下简称AT轨)的断面型式、尺寸、长度、外形及允许偏差，技术要求，试验方法，检验规则，标志及质量证明书和质量保证等。 本标准适用于设计和制造速度为200km/h及以下客货共线铁路50kg/m、60kg/m(及以上)轨型的道岔尖轨、可动心轨辙叉的心轨和翼轨、钢轨伸缩调节器的尖轨等部件的AT轨的坯料。

AT rails

SNI 05-7115-2005 铁路建筑钢螺钉穗规范

Steel screw spike specifications for railway buildings

TB/T 447-2004 高锰钢辙叉技术条件

本标准规定了铁路道岔用高锰钢辙叉(以下简称辙叉)的技术要求、试验方法、检验规则和标志等。 本标准适用于铁路用高锰钢铸造辙叉，也适用于指明应用本标准的高锰钢辙叉及其他高锰钢铸件。

Technical specification for the solid manganese steel frogs

TB/T 412-2004 标准轨距铁路道岔技术条件

本标准规定了标准轨距铁路道岔的技术要求、检验规则及标志、包装、运输、储运。 本标准适用于标准轨距铁路列车直向容许通过速度小于或等于160km/h的各类道岔、交叉（以下简称道岔），亦适用于其他指明采用本标准的产品。

Technical rule for turnouts of standard gauge railway

DS/ENV 13481-6/AC:2004 铁路应用 轨道 紧固系统的性能要求 第6部分：用于减振的特殊紧固系统

This European Prestandard specifies requirements for the performance of fastening systems for attaching rails to sleepers or longitudinal bearers.

Railway applications - Track - Performance requirements for fastening systems - Part 6: Special fastening systems for attenuation of vibration

KS R ISO 6305-4-2004(2009) 铁路构件交货技术要求第4部分:鱼尾板和扣件用未经处理的钢制螺母和螺栓及高强度螺母和螺栓

Railway components－Technical delivery requirements－Part 4：Untreated steel nuts and bolts and high－strength nuts and bolts for fish－plates and fastenings

KS R ISO 5003-2004(2009) 平底铁路钢轨和非处理钢制道岔和道口专用轨段交货技术要求

Flat bottom railway rails and special rail sections for switches and crossings of non－treated steel－Technical delivery requirements

KS R ISO 6305-3-2004(2009) 铁路构件交货技术要求第3部分:钢枕

Railway components－Technical delivery requirements－Part 3：Steel sleepers

KS R ISO 6305-2-2004(2009) 铁路部件交货技术要求第2部分:非合金碳钢底板

Railway components－Technical delivery requirements－Part 2：Unalloyed carbon steel baseplates

NF F50-201-1:2004 轨道交通.铁轨.轨道.第1部分:46 kg/m及以上丁字形铁路钢轨

Railway applications - Track - Rail - Part 1 : Vignole railway rails 46 kg/m and above.

TB/T 2635-2004 热处理钢轨技术条件

Technical specification for the heat treated rails

DIN EN 13232-3:2004 轨道交通.轨道.铁路侧线和道岔口.第3部分:车轮/钢轨相互作用要求

This document is the third in the series which makes up the EN for Switches and Crossings - Performance & Acceptance. It builds on the terminology and general framework set out in Part 1 and the basic geometric design principles in Part 2. The standard covers the following subjects:; how to characterise wheel and track dimensions,; geometric design principles for wheel guidance,; design principles for wheel load transfer,; how to decide whether movable crossings are needed.#,,#

Railway applications - Track - Switches and crossings - Part 3: Requirements for wheel/rail interaction; German version EN 13232-3:2003

GOST R 52279-2004 铁路机车用液压阻尼器.通用规范

Hydraulic dampers for railway rolling stock. General specifications