47.020.05 造船用材料和零件 标准查询与下载
共找到 767 条与 造船用材料和零件 相关的标准，共 52 页
This International Standard specifies a risk assessment method that protects the marine environment from the potential negative impacts of biocidally active substances used intentionally in the anti-fouling system on ships applied during its service time.
Ships and marine technology - Risk assessment on anti-fouling systems on ships - Part 1: Marine environmental risk assessment method of biocidally active substances used for anti-fouling systems on ships
- ICS
- 47.020.05
- CCS
- 发布
- 2013-02-21
- 实施
- 2013-02-21
Test method of evaluating performance for oil skimmer
- ICS
- 47.020.05
- CCS
- 发布
- 2012-12-04
- 实施
Test method of evaluating performance for oil skimmer
- ICS
- 47.020.05
- CCS
- 发布
- 2012-12-04
- 实施
이 표준은 제어된 환경에서 유출된 기름을 수거하는 유회수기의 성능 평가 방법에 대하여 규정
Test method of evaluating performance for oil skimmer
- ICS
- 47.020.05
- CCS
- U30
- 发布
- 2012-12-04
- 实施
- 2012-12-04
Ships and marine technology. Thermally toughened safety glass panes for windows and side scuttles
- ICS
- 47.020.05
- CCS
- U12
- 发布
- 2012-11-30
- 实施
- 2012-11-30
이 표준은 조선에서 사용되는 플랜지가 있는 용접 격벽 관통 쇠붙이의 주요 제조 치수를 명시
Shipbuilding－Welded bulkhead pieces with flanges for steel pipework－PN 6, PN 10 and PN 16
- ICS
- 47.020.05
- CCS
- U12
- 发布
- 2012-11-06
- 实施
- 2012-11-06
Shipbuilding－Welded bulkhead pieces with flanges for steel pipework－PN 6, PN 10 and PN 16
- ICS
- 47.020.05
- CCS
- 发布
- 2012-11-06
- 实施
Shipbuilding－Welded bulkhead pieces with flanges for steel pipework－PN 6, PN 10 and PN 16
- ICS
- 47.020.05
- CCS
- 发布
- 2012-11-06
- 实施
Thermally toughened safety-glass panes for windows and side scuttles
- ICS
- 47.020.05
- CCS
- 发布
- 2012-10-25
- 实施
이 표준은 KS V ISO 3903에 적합한 창문과 KS V ISO 1751에 적합한 현창
Thermally toughened safety-glass panes for windows and side scuttles
- ICS
- 47.020.05
- CCS
- U26
- 发布
- 2012-10-25
- 实施
- 2012-10-25
Thermally toughened safety-glass panes for windows and side scuttles
- ICS
- 47.020.05
- CCS
- 发布
- 2012-10-25
- 实施
This International Standard specifies materials and finish, dimensions for interchangeability, tolerances, parallelism and flatness, testing, marking and designation of thermally toughened safety glass panes for windows complying with ISO 3903 and side scuttles complying with ISO 1751.
Ships and marine technology - Thermally toughened safety glass panes for windows and side scuttles
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2012-07
- 实施
本标准规定了船用生活给排水聚乙烯和耐热聚乙烯塑料管的产品规格、技术要求、试验方法、检验规则等。 本标准适用于船舶与海上设施等生活区中使用的塑料管（包括饮用水管、冷热水管、灰水管、黑水管和舱室凝水管）的生产、试验和验收。 本标准不适用于塑料挠性管和软管。
Marine plastic pipes for supply and discharge sanitary water
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了船舶涂料修补性能的测定原理、试验条件、试验程序、试验结果、试验报告等。 本标准适用于船舶涂料完整配套体系在已老化或破损的旧涂层上的修补性能试验。
Determination of repairability for ship coatings
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2011-06-15
- 实施
- 2011-10-01
本标准规定了船用柴油机钢锻件的要求、试验、检验规则、标志和质量合格证书。 本标准适用于中、低速船用柴油机碳素结构钢、合金结构钢、不锈钢、耐热钢等锻件（以下简称锻件）的制造和验收。 本标准不适用于船用柴油机曲轴锻件的制造和验收。
Specifications for marine diesel engine steel forging
- ICS
- 47.020.05
- CCS
- U05
- 发布
- 2011-06-15
- 实施
- 2011-10-01
This SAE Standard specifies requirements for two types, three classes and four styles of reinforced hose and non-reinforced tubing for conveying gasoline or diesel fuel aboard small craft including pleasure craft whose fuel systems are regulated under 33 CFR 183 Subpart J. Refer to SAE J 1942 Hose and Hose Assemblies for commercial marine nonmetallic flexible hose or hose assemblies used in systems on board commercial vessels inspected and certified by the U.S. Coast Guard. Refer to SAE J 2046 Personal Watercraft Fuel Systems for fuel hose used on Personal Watercraft.
Marine Fuel Hoses
- ICS
- 47.020.05
- CCS
- U50
- 发布
- 2011-02-08
- 实施
- 2011-02-09
Effective August 28, 1991, the SAE replaced the USCG as the listing agency for Marine Hose Assemblies. The previousUSCG list was discontinued as of December 31, 1992, and is being replaced by this SAE listing, J1942-1.All products appearing on the USCG list as of December 31, 1992, may be carried over to the SAE J1942-1 providedthey meet the new test requirements listed in SAE J1942.If your products comply, you may retain your listings with no additional testing. (Please note that the USCG has theauthority to request and inspect your test results at their discretion).The following list consists of hose data provided as of December 2010, and is for convenience in determiningacceptability of nonmetallic flexible hose assemblies intended for usage under 46 CFR 56.60-25. Where the maximumallowable working pressure (MAWP) or type of fitting is not specified, use the manufacturer's recommended MAWP ortype of fitting. This list has been compiled by SAE Staff from information provided by the manufacturers whose product listings appear in this document.
Qualified Hoses for Marine Applications
- ICS
- 47.020.05
- CCS
- U55
- 发布
- 2010-12-30
- 实施
- 2010-12-30
本标准规定了环模制粒机压模锻件的规格与标记、技术要求、试验方法、检验规则、标志和包装。 本标准适用于环模制粒机压模锻件的锻造及机械粗加工。
Ring Die Granulator Die Forgings
- ICS
- 47.020.05
- CCS
- U 05
- 发布
- 2010-09-06
- 实施
- 2010-09-06
This SAE Part Standard covers selected inch dimensioned set screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE stand covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This standard permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document. The purpose of this document is to assist the designer and other personnel in providing requirements and PINs for the most commonly used set screws for ship systems and equipment. A PIN is normally required for all military applications and provides a useful means of communicating set screw requirements to suppliers and manufacturers in a very succinct manner.
Fastener Part Standard Hexagon Socket, Square Head, and Slotted Headless Set Screws Inch Dimensioned
- ICS
- 47.020.05
- CCS
- U50
- 发布
- 2010-01-14
- 实施
- 2016-12-08
