47.020.05 造船用材料和零件 标准查询与下载

CB/T 709.1-2004 船用柴油机喷油器总成技术条件

本标准规定了船用柴油机闭式喷油器总成的要求、试验方法、检验规则及标志、包装、运输、贮存。 本标准适用于中、大功率的高、中速船用柴油机喷油器的制造和验收。

Specifications of fuel injector assembly for marine diesel engine

CB 1372-2004 舰船滤油用高分子滤板纸规范

本截范规定了艦船油類管路系統沖洗或運行油液淨化用高分子濾板紙 的要求、 质基保证规定和交货准备等。 本规范适用于舰船上用以净化润清油、燃油、液压油等管路系统冲洗和运行油液的高分子小板纸的 制造和验收。

Specification for the hign-polymer of filter paper of filtering oil on ships

CB 1049-2004 双面传动应急舷侧阀规范

Specification for double drive emergency overboard vaive

CB/Z 800-2004 船用阀门选用指南

本指导性技术文件给出了船舶动力管路和船舶系统管路中阀门的功能、使用方法、在各管路系统中的选用、安装方法等的指南。 本指导性技术文件适用于船舶动力管路和船舶系统管路中阀门的选用。

Marine valve selection guide

CB 1374-2004 舰船用往复式液压缸规范

Specification of reciprocating hydraulic cylinder for naval ship

ANSI/ASA S2.25-2004 美国船体和上层结构振动测量,报告和评估的国家标准手册

Contains guidelines for limiting the hull and superstructure vibration of ships for the purposes of habitability and mechanical suitability. The mechanical suitability guidelines result in a suitable environment for installed equipment and preclude many major vibration problems, such as unbalance, misalignment, and other damage to the propulsion system. To obtain data to compare with the guidelines, this standard also specifies data acquisition and processing procedures

American National Standard Guide for the Measurement, Reporting, and Evaluation of Hull and Superstructure Vibration in Ships

HJB 284-2003 舰船涂料配套与涂装

Ship paint matching and painting

HJB 285-2003 舰船涂料性能规范

Performance specification for naval coatings

SAE J2656-2003 紧固件零件标准内六角、方头和开槽无头紧定螺钉 英制尺寸

This SAE Part Standard covers selected inch dimensioned set screws manufactured in accordance with American Society for Mechanical Engineers dimensional standards. This SAE stand covers material most often used in ship systems and equipment but its use may be applied wherever fasteners of the covered materials are used. This standard permits the fasteners to be identified and ordered by a part or identifying number (PIN) as defined in this document. The purpose of this document is to assist the designer and other personnel in providing requirements and PIN?s for the most commonly used set screws for ship systems and equipment. A PIN is normally required for all military applications and provides a useful means of communicating set screw requirements to suppliers and manufacturers in a very succinct manner.

Fastener Part Standard Hexagon Socket, Square Head, and Slotted Headless Set Screws - Inch Dimensioned

EN 12501-1:2003 金属材料防腐措施.土壤中腐蚀可能性.第1部分:总则

This European Standard provides a basis for assessing the corrosion likelihood in soil of buried metallic structures such as pipelines, sheathed metallic cables, storage tanks, sheet pilings, support anchors, culverts and earth reinforcement.

Protection of metallic materials against corrosion - Corrosion likelihood in soil - Part 1: General

EN 12499:2003 金属结构的内阴极保护.合并勘误表2006年6月

This European Standard specifies the structures, metals and surfaces which can be protected against corrosion by the application of internal cathodic protection, the electrolytic solutions and the conditions necessary for the application of internal cathodic protection and gives guidance on the application and operation of an effective internal cathodic protection system.

Internal cathodic protection of metallic structures

CB 1369-2002 舰船用金属材料进货检验及验收规则

本标准规定了舰船用金属材料进货检验的策划、控制、保障条件及主要金属材料的进货检验和验收的基本规则。 本标准适用于船厂对舰船用轧制钢材、钢铸件、钢锻件及焊接材料的进货检验及验收。

Inspection and acceptance regulations to stock with goods for metal of naval ship

CB/T 3953-2002 铝-钛-钢过渡接头焊接技术条件

本标准规定了焊接船用铝-钛-钢过渡接头时，对材料、焊工、焊接工艺、焊接质量检验及焊接缺陷返修等要求。 本标准适用于以铝合金为复层，钛为中间层，船体结构钢或其他结构钢为基层的爆炸复合板加工的过渡接头，作为铝结构与钢结构过渡连接时的焊接。

Specification for welding of aluminum-titanium-steel cladding transition joint

CB 1370-2002 舰船用非金属材料进货检验及验收规则

本标准规定了舰船用非金属材料进货检验及验收的基本规则、质量控制要求、项目及方法。 本标准适用于订购方对舰船用成品非金属材料和组份非金属材料的进货检验及验收。

Inspection and acceptance regulations to stock with goods for nonmetal of naval ship

CB 203-2002 高压螺纹接头通舱管件规范

Specification of high pressure thread joint penetration pieces

CB/T 3951-2002 船用阻燃橡胶地板

本标准规定了船用阻燃橡胶地板的要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于船舶及海洋平台舱室地面、钢甲板等处地面铺设用的阻燃橡胶地板,其它场所用的阻燃橡胶地板亦叮参照采用。

Fire-resistance rubber floor for ship

CB 1364-2002 舰船用铜质双卡套式管接头规范

本规范规定了舰船用铜质双卡套式管接头的分类、要求、质量保证规定和交货准备。 本规范适用于舰船(含潜艇)用管接头的设计、制造、试验和验收。

Specifications for copper double ferrule tube fittings of naval ship

CB 1365-2002 舰船用活塞隔离式蓄能器规范

本规范规定了舰船用活塞隔离式液压蓄能器的要求、质量保证规定和交货准备。 本规范适用于舰船用蓄能器的设计、制造、试验和验收。

Specification for hydraulic accumulator with piston type sepqrating of naval ships

KS V ISO 3372:2002 内河船舶蘑菇型通风机头

Inland vessels－Mushroom-type ventilator heads

KS V ISO 3372-2002 内河船舶蘑菇型通风机头

Inland vessels－Mushroom-type ventilator heads