47.020.05 造船用材料和零件 标准查询与下载

ANSI/ASTM F941:2000 船体表面准备和涂料涂敷检验规程

This practice is intended to serve as a guide for determining specific inspection requirements for marine surface preparation and coating application during new construction, major retrofit, or routine maintenance contracts. It is intended that this practice be used to coordinate inspection activities between ship owner, ship builder, coatings manufacturer and coatings applicator, and that specific requirements be developed before the commencement of surface preparation or coating application, or both. This practice does not provide a means of recording required data (for example, film thicknesses, temperatures, relative humidity, and so forth), but instead establishes a format for deciding what data must be recorded, when during the preparation/coating process, and by whom. This practice does not establish accept/reject criteria for surface preparation or coating inspection, nor does it address methods of repairing deficiencies found. It does, however, provide a means of determining them. This standard may involve hazardous materials, operations, and equipment. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Practice for Inspection of Marine Surface Preparation and Coating Application

ANSI/ASTM F940:2000 海上建筑物及造船用保护性涂料的质量控制验收检验程序的标准操作规程

This practice provides the quality control receipt inspection procedures for protective coatings (paints) procured for end item use on ships and other marine structures. The practice includes methods and procedures for verifying that coating materials received are within the range of physical and chemical characteristics as those originally specified and tested. This standard does not purport to address the safety concerns associated with its use. It is the responsibility of the user of this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

ASTM F718-99 造船和船舶油漆和涂料标准产品/程序数据表

1.1 The Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet provides on one sheet needed information concerning the characteristics of a specific paint or coating to include generic description, physical properties, surface preparation requirements, application requirements, and safety. The front side of the sheet contains four major, numbered paragraphs and a highlighted section for Special Safety Precautions. These paragraphs are as follows: I. Generic Type and Description II. Manufacturers Data III. Properties IV. Surface Preparation Minimum Requirements The back side of the page contains the following paragraphs: V. Mixing Procedure VI. Application. 1.2 The completed data sheets can be utilized by technical personnel to help evaluate the technical acceptability of a proposed material, by production personnel to evaluate production compatibility of proposed materials and to provide application instructions for selected paints and coatings materials, and by quality control personnel to verify attributes of materials.

Standard for Shipbuilders and Marine Paints and Coatings Product/ Procedure Data Sheet

CB/T 3926-1999 船用铜管简选系列

Marine simplified selected series for copper pipe

CB/T 3927-1999 船用铸造阀件壁厚

Wall thickness of casting body for marine valve

CB/T 952-1999 支管螺纹接头

Threaded joint for brarch pipe

CB/T 3907-1999 船用锻钢件超声波探伤

Ultrasonic crack detection of marine steel forgings

CB/T 3212-1999 船用搭焊、对焊、铜管折边松套.异径钢法兰

本标准规定了法兰连接尺寸按GB 569、GB 2501的船用搭焊、对焊、铜管折边松套异径钢法兰的产品分类、技术要求、检验规则、标志和包装。 本标准适用于公称压力不大于2.5 MPa，工作温度不大于400 C的法兰。

Lap Welding balanced welding.copper pipe flanging free.Flared steel flange for marine

CB/T 3836-1999 船用中压圆弧顶杆式叶片马达

本标准规定了船用中压(6.3 MPa)多作用，以切换工作腔连接方式构成复式排量的圆弧顶杆式叶片马达的分类和标记、技术要求、试验方法和检验规则。 本标准适用于以矿物油为工作介质的船用中压圆弧顶杆式叶片马达。

Mid-pressure vane motor with arc push rod for ship

CB/T 3835-1999 船用高压横梁顶杆式叶片马达

本标准规定了船用高压(16 MPa)多作用，以切换工作腔连接方式构成复式排量的横梁顶杆式叶片马达的分类和标记、技术要求、试验方法和检验规则。 本标准适用于以矿物油为工作介质的船用高压横梁顶杆式叶片马达的设计、生产与检验。

High-pressure vane motor with crossbeam puch rod for ship

CB/T 3819-1999 板式止回阀

本标准规定了板式止回阀的产品分类、技术要求、试验方法、检验规则、标志和包装。 本标准适用于船舶淡水、海水管路系统中板式止回阀的设计与制造。

Wafer type check valves

CB 537-1999 耐压船体法兰连接尺寸和密封面

1.1 主题内容 本标准规定了水下产品通海阀和舷侧杯形管节、舷侧阀和焊接座板相连接的法兰的连接尺寸和密封面的形状及尺寸。 1.2 适用范围 本标准适用于工作压力不大于3.0MPa法兰的设计。 1.3 分类 法兰按其密封面形状分为； A型-密封面为榫形的法兰； B型-密封面为槽形的法兰； C型-密封面为台形的法兰。

Flangs for pressure hull.Connection dimensions and mating face

GOST R ISO 10112-1999 隔音材料.复数模量的图示

Настоящий стандарт устанавливает форму представления в графическом виде комплексного модуля упругости вязкоупругого вибродемпфирующег

Damping materials. Graphical presentation of the complex modulus

CB 1125-1998 水声用压电陶瓷材料规范

本规范规定了六种类型水声用压电陶瓷材料的要求、质量保证规定和交货准备等。 本规范适用于水声用压电陶瓷材料。电声与超声用压电陶瓷材料也可参照使用。

Specification for peizoelectric ceramic material of underwater sound

CB/T 3823-1998 船用液控单向阀

本标准规定了公称压力为31.5 MPa船用液控单向阀的分类、要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于石油基液压油为工作介质的单向阀。非船舶行业用的单向阀也可参照本标准。

Hydraulic pilot controled check valver for ship

CB/T 3361-1998 甲板敷料

本标准规定了甲板敷料的分类、结构型式、要求、试验方法和检验规则等。 本标准适用于各类甲板敷料的生产和验收。

Deck covering

CB/T 3830-1998 船用岩棉及其制品

本标准规定了船用岩棉及其制品的分类和标记、要求、试验方法、检验规则等。 本标准适用于船舶舱室、管道等处保温隔热用的岩棉及其板、带、毡、管壳等制品的生产和验收。

Rock wool and their products for ship

CB/T 3829-1998 船用玻璃棉制品

本标准规定了船用玻璃棉制品的分类、要求、试验方法、检验规则、标志、包装运输和贮存。 本标准适用于作为绝热、吸声和装饰用的玻璃棉板、玻璃棉毡、玻璃棉管壳的研制、生产和验收。

Glass wool products for ship

CB/T 3828-1998 船用柴油机排气消声器技术条件

本标准规定了船用柴油机排气消声器的定义、要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于船用柴油机排气系统中的消声器，其它用途的柴油机排气系统的消声器也可参照执行。

Specification for exhaust silencers of marine diesel engine

CB 687-1998 缩短本体法兰青铜止回操纵阀规范

1.1 主题内容 本规范规定了工作压力为3.0 MPa缩短本体法兰青铜止回操纵阀的要求、质量保证规定和交货准备。 1.2 适用范围 本规范适用于潜艇疏排水系统用缩短本体止回操纵阀的设计，制造和验收。 1.3 分类 缩短本体止回操纵阀按其通路可分为下列两种型式： A型——三通缩短本体止回操纵阀； B型——直角缩短本体止回操纵阀。

Specification of flanged bronze check-operating valve for shortening main body