47.020.50 甲板设备和装置 标准查询与下载

BS ISO 21885:2019 船舶和海洋技术 使用电阻伴热的楼梯测试规范

What is ISO 21885- Testing specification for stairsteps in ships and marine technology about?    ISO 21885 is an international standard on ships and marine technology that discusses the  testing specification for stairsteps using electrical resistance trace heating to test the performance of stairsteps.   ISO 21885 specifies a test method to assess the performance of stairsteps using electrical resistance trace heating to provide anti-icing in low-temperature environments when installed for exterior applications.   ISO 21885 also details the requirements for the test facility, the test conditions, the test specimens, the test procedures and the test report.   Who is ISO 21885- Testing specification for stairsteps in ships and marine technology for?   ISO 21885 on testing specifications for stairsteps in ships and marin...

Ships and marine technology. Testing specification for stairsteps using electrical resistance trace heating

ISO 21711:2019 海洋结构物.移动式海上装置.链轮

This document specifies the requirements for the profiles, dimensions, tolerances, materials and inspection of chain wheels for chains on mobile offshore units. Chain wheels meeting the requirements of this document can be used with offshore mooring chains conforming to ISO 20438.

Marine structures — Mobile offshore units — Chain wheels

ISO 21885:2019 船舶和航海技术.电阻伴热楼梯踏步试验规范

This document specifies a test method to assess the performance of stairsteps using electrical resistance trace heating to provide anti-icing in low temperature environments, when installed for exterior applications. It includes requirements for the test facility, the test conditions, the test specimens, the test procedures and the test report.

Ships and marine technology — Testing specification for stairsteps using electrical resistance trace heating

ISO 21539:2019 船舶和船舶技术 - 安装在甲板上方的极化区域环境的加热走道

This document specifies a test method to assess the performance of walkways using electrical resistance trace heating to provide anti-icing in low temperature environments, when installed for exterior applications. It includes requirements for the test facility, the test conditions, the test specimens, the test procedures and the test report.

Ships and marine technology — Testing specification for walkways using electrical resistance trace heating

ISO 22419:2019 船舶和航海技术.电阻伴热扶手试验规范

This document specifies a test method to assess the performance of handrails using electrical resistance trace heating to provide anti-icing in low temperature environments, when installed for exterior applications. It includes requirements for the test facility, the test conditions, the test specimens, the test procedures and the test report.

Ships and marine technology — Testing specification for handrails using electrical resistance trace heating

ISO 21130:2019 船舶和海洋技术.紧急拖曳装置的主要部件

This document specifies the technical requirements, test methods, inspection rules and markings for major components of emergency towing arrangements (ETA) provided for tankers, gas carriers (LPG, LNG, etc.) and chemical vessels no less than 20000 deadweight tonnes (DWT). It is only applicable to emergency towing arrangements as defined in 3.1. NOTE For any other applications, such as for mooring at a single point mooring (SPM) facility, the appropriate standards need to be referred to.

Ships and marine technology — Major components of emergency towing arrangements

BS ISO 799-1:2019 船舶和海洋技术 飞行员梯子 设计与规格

What is ISO 799-1 - Pilot ladders about ? ISO 799-1 specifies requirements for pilot ladders of a ship, which are provided to enable a maritime pilot to embark and disembark from a ship safely against a vertical portion of the ship’s hull. It is applicable to merchant ships that embark and disembark maritime pilots with the ship underway.   ISO 799-1 is intended to supplement existing IMO requirements for pilot ladders. Since IMO instruments do not include specific requirements for prototype testing of pilot ladders for approval, the tests included in this document are in excess of the existing IMO requirements.    ISO 799-1 can be used for independent acceptance of a pilot ladder complying with SOLAS, in which case certification must be issued from a signatory state of SOLAS.   Note: ISO 799 is incorporated by reference and footnoted in the International Con...

Ships and marine technology. Pilot ladders. Design and specification

ISO 799-1:2019 船舶和海上技术.引航员梯.第1部分:设计和规范

This document specifies requirements for pilot ladders of a ship, which are provided to enable a maritime pilot to embark and disembark from a ship safely against a vertical portion of the ship’s hull. It is applicable to merchant ships which embark and disembark maritime pilots with the ship underway.

Ships and marine technology — Pilot ladders — Part 1: Design and specification

T/CANSI 4-2018 转叶式舵机试验台要求

本标准规定了转叶式液压舵机试验台（以下简称试验台）的一般要求、组成、组件要求、安全要求、环境及场地要求及操作管理要求等。

Technical requirements of test bench for rotary vane steering gear

T/CANSI 3-2018 锚绞机试验台要求

本标准规定了锚绞机试验台（以下简称试验台）的一般要求、组成、组件要求、安全要求、环境及场地要求及操作管理要求等。

Technical requirements of test bench for anchor and winch

SC/T 8030-2018 渔船气胀救生筏筏架

Fishing boat inflatable life raft raft frame

SC/T 8169-2018 渔船救生筏安装技术要求

Technical requirements for installation of life rafts on fishing boats

ASTM F1074-87(2018) 标准规范垫片 焊接喇叭类型

1.1 This specification covers hollow cleats and pads for marine use. 1.2 The cleats shall be used where securing of boat handling lines are required onboard commercial and navy boats and crafts. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Cleats, Welded Horn Type

ASTM F2936-12(2018)e1 轴承 船舶系泊 铸钢标准规范

1.1 This specification covers the principal dimensions and materials of closed chocks for installation on ships used for mooring. 1.2 Chocks can be used with either wire rope or fiber and synthetic ropes. 1.3 Chocks are for mounting directly on a deck, seat (foundation), or for mounting in a bulwark. 1.4 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Chocks, Ship Mooring, Cast Steel

ASTM F2935-12(2018)e1 巴拿马型系泊铸件用垫块的标准规范

1.1 This specification covers the principal dimensions and materials of chocks installed in ships to comply with the regulations of the Panama Canal. 1.2 Chocks can be used with either wire rope or fiber and synthetic ropes. 1.3 Chocks are for mounting directly on a deck, seat (foundation) or for mounting in a bulwark. 1.4 To meet Panama Canal Company regulations the radius of contact surfaces of lines must be 180 mm. 1.5 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Chocks, Panama, Mooring Cast Steel

JIS F 2001:2017 船舶与海洋技术.系缆柱

Ships and marine technology -- Bollards

BS ISO 7825:2017 造船业 甲板机械 一般要求

Shipbuilding. Deck machinery. General requirements

ISO 7825:2017 造船.甲板机械.通用要求

This document specifies the characteristics common to all deck machinery of any type not detailed in the relevant specific International Standards. This document is applicable to ships in all navigation zones.

Shipbuilding - Deck machinery - General requirements

BS ISO 6482:2017 造船. 甲板机械. 绞缆筒外形

Shipbuilding. Deck machinery. Warping end profiles

ISO 6482:2017 造船.甲板机械.绞缆筒外形

This document specifies the types, nominal sizes, dimensions, markings and selection rules of warping end profiles. The warping end specified in this document is applicable to windlasses, mooring winches, capstans and other deck machinery with steel wire rope, and ropes of natural and man-made fibre.

Shipbuilding - Deck machinery - Warping end profiles