47.020.50 甲板设备和装置 标准查询与下载

GSO ISO 799:2015 船舶和航海技术 引航员梯

This International Standard specifies requirements for a ship’s pilot ladder which is provided to enable a maritime pilot to embark and disembark a ship safely along a vertical portion of the ship's hull. It is applicable to merchant ships which embark and disembark maritime pilots with the ship underway. National maritime safety administrations are urged to accept ladders complying with this International Standard on their ships, as complying fully with the requirements of the 1974 International Convention for the Safety of Life at Sea (SOLAS), as amended.

Ships and marine technology -- Pilot ladders

GSO ISO 7365:2015 造船和海洋结构物 甲板机械 深海用拖曳绞车

This International Standard specifies requirements for the design, operation, performance and acceptance tests of towing winches having electric, hydraulic, diesel or steam drive. It is applicable to towing winches for deep sea use. It does not consider fibre rope winches but does not exclude their use.

Shipbuilding and marine structures -- Deck machinery -- Towing winches for deep sea use

GSO ISO 1704:2015 船舶和航海技术 螺柱锚链

This International Standard specifies the shape, proportions, dimensions and tolerances of the component parts of stud-link anchor chains. Any statutory requirements, rules and regulations applicable to the individual ship concerned also apply.

Ships and marine technology -- Stud-link anchor chains

GSO ISO 3730:2015 造船和海洋结构物 系泊绞车

This International Standard specifies requirements for the design, operation, performance and acceptance tests of automatic and non-automatic mooring winches, with hydraulic, electric or steam drive, which fulfil the functions of manoeuvring, holding and storing mooring ropes on a single drum. Such winches can also be used for warping purposes

Shipbuilding and marine structures -- Mooring winches

GSO ISO 9519:2015 造船和海洋结构 狗步梯的横档

This International Standard specifies the types, dimensions, material, manufacture and designation of rungs for dog-step ladders; it also lays down the installation and composition of single rungs forming a dog-step ladder. Dog-step ladders, formed from single rungs, may only be used where fixed vertical ladders with stringers1) cannot be installed. Dog-step ladders fitted to the ship's structure should serve only to bridge minor differences in height. Dog-step ladders as specified in this International Standard may also be fitted to marine structures other than ships to serve equivalent purposes. NOTE 1 Users of this International Standard should note that they should ensure compliance with such statutory requirements, rules and regulations as may be applicable to the individual ship or marine structure concerned.

Shipbuilding and marine structures -- Rungs for dog-step ladders

GSO ISO 3797:2015 造船业 钢制垂直梯

This International Standard specifies the main dimensions and characteristics for vertical steel ladders to be fitted on board ships in small holds, between deck spaces, on masts, kingposts, trunks, deck-house tops, maintenance platforms and for similar applications. NOTE — Vertical steel ladders in accordance with this International Standard are not suitable for use in large cargo tanks or holds for which there are special IMCO requirements.

Shipbuilding -- Vertical steel ladders

BS ISO 29400:2015 船舶与海洋技术. 海上风能. 港口和海洋作业

Ships and marine technology. Offshore wind energy. Port and marine operations

SC/T 8149-2015 渔业船舶用气胀式工作救生衣

本标准规定了渔业船舶用气胀式工作救生衣的产品分类和结构、技术要求、检验规则、试验方法和标志、包装、存储等。 本标准适用于渔业船舶船员工作时使用的工作救生衣。

Working inflatable lifejacket for fishing vessel

ISO 29400:2015 船舶与海洋技术. 海上风能. 港口和海洋作业

Ships and marine technology - Offshore wind energy - Port and marine operations

CB/T 3583-2015 船舶货舱盖修理技术要求

本标准规定了钢质海船货舱盖的勘验、修理的一般要求、几种典型货舱盖的修理要求和检验等。 本标准适用于钢质海船货舱盖的修理，其它船舶也可参照执行。

Requirement for repair of cargo hatchcove

CB/T 4408-2015 船用全压式液化气储罐焊接技术条件

本标准规定了船用全压式液化气储罐（以下简称储罐）的焊接要求、焊接检验、焊后消应力处理、焊缝返修、焊缝标记等。 本标准适用于CB/T 4240规定的采用焊条电弧焊、埋弧焊、钨极气体保护焊和熔化极气体保护焊焊接的储罐。

Welding specification for cargo tanks of fully pressurized style liquefied gas carriers

CB/T 4407-2015 液化二氧化碳运输船用储罐

本标准规定了液化二氧化碳运输船用储罐（以下简称储罐）的结构型式与标记、要求、试验方法、检验规则以及标志、包装、运输和贮存等。 本标准适用于设计蒸气压力不大于2.7 MPa，设计温度不低于-40 ℃，储存介质为液化二氧化碳的储罐的设计、制造和验收。

Cargo tanks of liquefied carbon dioxide gas carriers

CB/T 3677-2015 船舶进出干船坞技术要求

本标准规定了船舶进出干船坞前的坞墩布置图绘制、排墩、进坞船舶的调载、进坞前准备、进坞、坞修、出坞等要求。 本标准适用于钢质船舶进出干船坞，在坞内建造的船舶也可参照使用。

Requirement for ship in and out of dry dock

CB/T 3377-2015 高压水清理船体外板质量等级

本标准规定了高压水清理船体外板质量等级的划分及要求、清洗和检验。 本标准适用于钢质船舶修理工程中的船体外板高压水清理作业质量检验。船舶其他部位采用高压水清理时，也可参照本标准执行。

The degree of quality for high pressure water cleaning shell plate

CB/T 3509-2015 船用柴油机凸轮修理技术要求

本标准规定了船用柴油机凸轮勘验、修理、换新和检查等。 本标准适用于船用柴油机的整体式或组合式凸轮的修理。

Repairing technical requirements for marine diesel engine cam

CB/T 3473-2015 船用柴油机气缸盖修理技术要求

本标准规定了船用柴油机气缸盖勘验、修理、换新和检查等技术要求。 本标准适用于船用柴油机主机气缸盖的修理，其它用途柴油机可参照采用。

Repairing technical requirements for marine engine cylinder cover

CB/T 3510-2015 船用柴油机凸轮轴修理技术要求

本标准规定了船用柴油机凸轮轴勘验、修理、换新和检验等。 本标准适用于船用柴油机的整体式或组合式凸轮轴的修理。

Repairing technical requirements for marine diesel engine camshaft

KS V 0028-2014(2019) 造船术语表（一般容器而言）

Glossary of terms for shipbuilding(General vessel terms)

KS V 0028-2014 造船术语表（船舶通用术语）

Glossary of terms for shipbuilding(General vessel terms)

GSO ISO 9089:2014 海洋建筑 移动式海洋装置 锚式起重机

This International Standard specifies requirements of anchor winches for position keeping, and temporary and emergency anchoring of mobile offshore units, particularly drill-ships, semi-submersible drilling rigs and accommodation platforms. These requirements do not apply to anchor winches which are used for other purposes such as hauling the vessel as is the case for pipelaying, ploughing, pile-driving and crane vessels. NOTES 1 Where national regulations and the rules of classification societies differ from this International Standard, they take precedence. 2 The attention of users is drawn to the mandatory adoption of some standards by international organizations or national administrations.

Marine structures -- Mobile offshore units -- Anchor winches