47.020.70 导航和控制设备 标准查询与下载

BS ISO 21792:2019 船舶和海洋技术 导航和船舶作业 机载电话设备指南

What is ISO 21792 - Guidelines for onboard telephone equipment about? ISO 21792 provides general and specific recommendations related to the quality of communication, connectivity, installation, performance and maintenance of onboard telephone equipment, including automatic telephones, common battery telephones, battery-less telephones and sound-powered telephones. It also specifies requirements for the related performance tests (shop tests and onsite tests) and for the maintenance tests. Note: ISO 21792 is not applicable to digital telephones, LAN (VoIP) telephones, and wireless telephones. Who is ISO 21792 - Guidelines for onboard telephone equipment for ? ISO 21792 on onboard telephone equipment is useful for: Telephone equipment manufacturers Telephone equipment  engineering companies Shipbuilders Shipowners Why should you use ISO 21792 -

Ships and marine technology. Navigation and ship operations. Guidelines for onboard telephone equipment

ISO 21792:2019 船舶和海洋技术.导航和船舶操作.船上电话设备指南

This document provides general and specific recommendations related to the quality of communication, connectivity, installation, performance and maintenance of onboard telephone equipment, including automatic telephones, common battery telephones, battery-less telephones and sound-powered telephones. It also specifies requirements for the related performance tests (shop tests and onsite tests) and for the maintenance tests. It is not applicable to digital telephones, LAN (VoIP) telephones, and wireless telephones. NOTE These telephones are excluded because they were under development during the elaboration of this document so that their specifications remained to be determined. Table 1 further illustrates the applicability of this document. Table 1 — Applicability of this document Type of connection Signal Analog Digital Wired X n.a. Wireless n.a. n.a. X: covered in this document. n.a.: not applicable.

Ships and marine technology — Navigation and ship operations — Guidelines for onboard telephone equipment

ASTM F707/F707M-94(2019)e1 组合仪表板的标准规范

1.1 This specification covers modular gauge boards for mounting 89-mm [31⁄2-in.], 114-mm [41⁄2-in.], 152-mm [6-in.], and 216-mm [81⁄2-in.] dial size pressure gauges and dial thermometers for miscellaneous shipboard applications. 1.2 Gauge boards ordered under this specification are suitable for pressure gauges and dial thermometers with either turret or back flanged type cases and with either back or bottom connections (see Appendix X1). 1.3 Gauge mounting dimensions shall be in accordance with ASME B40.1. 1.4 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. NOTE 1—Gauge boards covered by this specification are those normally supplied by the shipyard as opposed to the shipyard’s equipment subcontractor. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Modular Gauge Boards

ISO 25862:2019 船舶和航海技术.船用磁罗盘和方位读数装置

This document specifies requirements for the construction and performance of marine magnetic compasses for navigation and steering purposes, binnacles and azimuth reading devices. Two types of binnacle are specified; the appropriate type for a given vessel is determined by the design of the ship (see Clause 5). This document applies to liquid-filled magnetic compasses: — intended for use in ship's navigation and steering in sea navigation; — having a direct reading system; and — which can be of the reflecting, projecting or transmitting types. In the context of this document, a magnetic compass is an instrument consisting of a directional system supported by a single pivot inside a bowl that is completely filled with liquid and supported by gimbals inside or outside the bowl. However, this document also addresses compasses without gimbals; the requirements relating to gimbals do not apply to such compasses. This document applies to magnetic compasses carried on board: a) all ships required to carry a standard compass as perISOLAS Chapter V, the Class A magnetic compass; b) lifeboats and rescue boats as per the IMO Lifesaving Appliances (LSA) Code, fitted with the Class B magnetic compass; and c) all ships to which a) and b) above do not apply, but which are fitted with a Class A or B magnetic compass. This document does not apply to: a) dry card compasses; b) types of compass designed on principles different from those stated above or not complying with the descriptions given; or c) hand bearing compasses. The requirements for the testing and certification of marine magnetic compasses, azimuth reading devices and binnacles are given in Annexes A, B, C, and D. The requirements for the positioning in ships, the determination of safe distances and the deviation adjustment of compasses are given in Annexes E, F and G, respectively. The special requirements of the magnetic compass for lifeboats/rescue boats are given in Annex H.

Ships and marine technology — Marine magnetic compasses, binnacles and azimuth reading devices

IEC 61097-4:2012+AMD1:2016+AMD2:2019 CSV 全球海上遇险和安全系统（GMDSS）.第4部分:Inmarsat-C船舶地面站和Inmarsat增强群呼（EGC）设备.操作和性能要求 试验方法和要求的试验结果

Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testi

IEC 61097-4:2012/AMD2:2019 全球海上遇险和安全系统（GMDSS）.第4部分:Inmarsat-C船舶地面站和Inmarsat增强群呼（EGC）设备.操作和性能要求 试验方法和要求的试验结果

Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testi

KS V 8890-2019 船舶频率分析系统动态测距试验规程

Dynamic range measurement test procedure of frequency analysis system for ships

T/CSNAME 004-2019 基于AUTONET 分布数据库全自动同步的船岸一体大数据池技术要求

本标准规定基于AUTONET分布数据库全自动同步的船岸一体大数据池的基本要求、结构要求和软件要求等。

Technical requirements for ship-shore Intergration big data pool based on fully automatic synchronous AUTONET distributed database

BS ISO 19636:2019 船舶和海洋技术 用于确定液化天然气运输船纵倾和横倾的测斜仪的一般要求

1   Scope This document provides general requirements for the accuracy, installation, calibration and verification of trim and list inclinometers used for the determination of trim and list of LNG carriers for the purpose of measuring on-board cargo level.

Ships and marine technology. General requirements for inclinometers used for the determination of trim and list of LNG carriers

ISO 19636:2019 船舶和海洋技术.液化天然气运输船纵倾和纵倾测量仪的一般要求

This document provides general requirements for the accuracy, installation, calibration and verification of trim and list inclinometers used for the determination of trim and list of LNG carriers for the purpose of measuring on-board cargo level.

Ships and marine technology — General requirements for inclinometers used for the determination of trim and list of LNG carriers

BS EN IEC 63135:2019 海上导航和无线电通信设备和系统 自动识别系统（AIS） SAR 机载设备 操作和性能要求、测试方法和所需的测试结果

What is BS EN IEC 63135 about?    BS EN IEC 63135 specifies the minimum operational and performance requirements, methods of   Testing, and required test results as applicable for automatic identification systems (AIS) VHF data link (VDL) related parts of an AIS SAR airborne station. BS EN IEC 63135 incorporates the applicable technical characteristics of AIS SAR airborne equipment included in Recommendation ITU-R M.1371 and takes into account the ITU Radio Regulations, where applicable.   BS EN IEC 63135 also specifies the minimum requirements for the interfaces to other equipment   suitable to be used as means of input and display data. Attention is drawn on those other requirements specific for airborne equipment that can exist and are beyond the scope of BS EN IEC 63135 .   Who is BS EN IEC 63135 for?

Maritime navigation and radiocommunication equipment and systems. Automatic identification systems (AIS). SAR Airborne equipment. Operational and performance requirements, methods of test and required test results

JT/T 1235-2019 国际移动卫星F77船舶地球站操作和性能要求、测试方法和要求的测试结果

Inmarsat F77 Ship Earth Station Operation and Performance Requirements, Test Methods and Requirements Test Results

IEC 61097-6:2019 全球海上遇险和安全系统（GMDSS）.第6部分:船舶接收导航和气象警告及紧急信息用窄带直接打印电报设备（NAVTEX）

Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ship

IEC 61097-16:2019 全球海上遇险和安全系统（GMDSS）.第6部分:船舶接收导航和气象警告及紧急信息用窄带直接打印电报设备（NAVTEX）

Global maritime distress and safety system (GMDSS) - Part 6: Narrowband direct-printing telegraph equipment for the reception of navigational and meteorological warnings and urgent information to ship

IEC 61097-4:2019 全球海上遇险和安全系统（GMDSS）.第4部分:Inmarsat-C船舶地面站和Inmarsat增强群呼（EGC）设备.操作和性能要求 试验方法和要求的试验结果

Global maritime distress and safety system (GMDSS) - Part 4: Inmarsat-C ship earth station and Inmarsat enhanced group call (EGC) equipment - Operational and performance requirements, methods of testi

KS V ISO 8728:2018 船用陀螺罗经

Marine gyro-compasses

KS V ISO 8728-2018 船用陀螺罗经

Marine gyro-compasses

KS V ISO 8728-2018(2023) 船用陀螺罗盘

Marine gyro-compasses

BS EN IEC 62923-1:2018 海上导航和无线电通信设备和系统 桥梁警报管理 操作和性能要求、测试方法和所需的测试结果

What is BS EN IEC 62923-1 - Bridge alert management about ? BS EN IEC 62923-1 specifies the operational and performance requirements, methods of testing, and required test results for the bridge alert management (BAM) in support of IMO resolution MSC.302(87).   It is applicable to all alerts presented on and transferred to the bridge.   Note: All text of BS EN IEC 62923-1 whose wording is identical to that of IMO resolution MSC.302(87) is printed in italics, and the resolution and associated performance standard paragraph numbers are indicated in brackets. (MSC.302/2) To enhance the safety of operation, the Performance standards given in resolution MSC.302(87) provide requirements for the harmonized presentation and treatment of alerts on the bridge and specify central alert management (CAM) system.  Who is BS EN IEC 62923-1 - Bridge alert management for ? BS EN IEC 62923-1 on

Maritime navigation and radiocommunication equipment and systems. Bridge alert management - Operational and performance requirements, methods of testing and required test results

IEC 63135:2018 海上导航和无线电通信设备及系统-自动识别系统（AIS）-合成孔径雷达机载设备-操作和性能要求 试验方法和要求的试验结果

This document specifies the minimum operational and performance requirements@ methods of testing and required test results as applicable for automatic identification systems (AIS) VHF data link (VDL) related parts of an AIS SAR airborne station. This document incorporates the applicable technical characteristics of AIS SAR airborne equipment included in Recommendation ITU-R M.1371 and takes into account the ITU Radio Regulations@ where applicable. This document also specifies the minimum requirements for the interfaces to other equipment suitable to be used as means of input and display data. Attention is drawn on that other requirements specific for airborne equipment can exist and are beyond the scope of this document.

Maritime navigation and radio communication equipment and systems – Automatic identification systems (AIS) - SAR airborne equipment – Operational and performance requirements, methods of test and requ