47.020.99 有关造船和海上构筑物的其他标准 标准查询与下载

T/CANSI 150-2024 海上风力发电机组钢制塔筒防腐吸波涂料

本文件规定了海上风力发电机组钢制塔筒防腐吸波涂料（以下简称防腐吸波涂料）的分类、要求、试验方法、检验规则、标志、包装、运输和贮存。

Anti-corrosive absorbing coating for offshore wind power steel structures of tubular foundations

ISO 24146-1:2024 船舶和海洋技术内河船上的船上废弃物第1部分:船上管理和处理

Ships and marine technology — Shipboard waste on inland navigation vessels — Part 1: On board management and handling

BS ISO 23745:2024 船舶和海洋技术 船载气象仪器通用规范

Ships and marine technology. General specification for shipborne meteorological instruments

24/30441384 DC BS ISO 7613 船舶和海洋技术 漏斗挖泥船 尾吸管位置监控系统

BS ISO 7613 Ships and marine technology - Hopper dredger. Trailing suction tube position monitoring system

T/CANSI 119-2023 船载水下机器人选用与操作一般要求

本文件规定了船载水下机器人的选用原则、操作条件、操作准备、操作要求、应急处置、操作记录等内容。

General requirements for selection and operation of shipborne Remotely Operated Vehicle

T/CSNAME 048-2023 极地船舶结构应力监测系统要求

本文件规定了极地船舶结构应力监测系统的一般要求、监测要求、硬件要求、软件要求、工程要求和升级扩展要求。 本文件适用于冰区航行的极地船舶结构应力监测系统的设计和安装，在非极地船舶上设计安装结构应力监测系统可选择性参考本标准。

Requirements for polar ship structural stress monitoring system

T/ZJSHIP 002-2023 船舶浮箱连接专用装置安装与检验要求

本文件规定了船舶浮箱连接专用装置的术语和定义、安装准备、安装要点及检查、检验要求。本文件适用于内河工程船与浮箱之间、浮箱与浮箱之间连接装置的安装和检验。

Installation and examination requirements of buoyancy chamber connecting devices for ship

ASTM E2680-23 透明透明液体外观的标准试验方法（目视检查程序）

1.1 This test method describes the visual assessment of the appearance of clear, transparent liquids for clarity and the presence of undesirable components (contamination) such as suspended matter, free water (or oil) and particulates when examined by transmitted light. Measurements requiring instrumentation are not included in this method. This test method was originally designed for application to glycols and methanol wall washes of marine vessels but may be applicable to other clear transparent liquids. 1.1.1 This test method can be used as a field test at storage temperatures or as a laboratory test at room temperatures. 1.1.2 This test method provides a visual appearance description of transparent liquids. It is a qualitative assessment only. 1.2 Review the current appropriate Safety Data Sheets (SDS) for detailed information concerning toxicity, first aid procedures, and safety precautions. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Consult current OSHA regulations, suppliers’ Safety Data Sheets, and local regulations for all materials used in this test method. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)

ISO/PRF 23745:2023 船舶和海洋技术 船载气象仪器通用规范

Ships and marine technology — General specification for shipborne meteorological instruments

T/GDMES 0044-2023 海洋工程电驱动齿轮箱

本文件规定了海洋工程电驱动齿轮箱的分类、结构与标记、技术要求、环境适应性要求、试验方法、检验规则、标志、包装、运输和贮存等。

Electric driven gearbox for offshore platform

ISO/CD 7613:2023 船舶和海洋技术 — 漏斗式挖泥船 — 拖吸管位置监测系统

Ships and marine technology — Hopper dredger — Trailing suction tube position monitoring system

BS ISO 3725:2023 船舶和海洋技术 水生公害物种 压载水排放合规监测装置性能评估方法

1   Scope This document specifies methods to evaluate the performance of a specific class of analytical instruments, known as compliance monitoring devices ( CMDs ). These instruments are designed and intended to examine ballast water to determine whether a sample meets or exceeds limits for the concentration of living or viable organisms. These limits include those specified by the International Maritime Organization (IMO) Regulation D-2 in the International Convention for the Control and Management of Ships' Ballast Water and Sediments [ 4 ] or other discharge standards ( DS ) adopted by national or regional authorities. The test methods measure the agreement between the CMD and a reference method to calculate trueness and precision . Both trueness and precision consider only simple, categorical outcomes (e.g. “meets” or “exceeds” the DS ). The performance metric reliability is quantified by the frequency of instances when the CMD is not available or is not operating as expected. The set of tests and trials is based upon the CMD manufacturer claims , such as the DS group(s) targeted by the CMD , and known limitations, including those based upon the salinity of the sample water.

Ships and marine technology. Aquatic nuisance species. Methods for evaluating the performance of compliance monitoring devices for ballast water discharges

ISO 3725:2023 船舶和海洋技术 水生公害物种 压载水排放合规监测装置性能评估方法

This document specifies methods to evaluate the performance of a specific class of analytical instruments, known as compliance monitoring devices (CMDs). These instruments are designed and intended to examine ballast water to determine whether a sample meets or exceeds limits for the concentration of living or viable organisms. These limits include those specified by the International Maritime Organization (IMO) Regulation D-2 in the International Convention for the Control and Management of Ships' Ballast Water and Sediments[4] or other discharge standards (DS) adopted by national or regional authorities. The test methods measure the agreement between the CMD and a reference method to calculate trueness and precision. Both trueness and precision consider only simple, categorical outcomes (e.g. “meets” or “exceeds” the DS). The performance metric reliability is quantified by the frequency of instances when the CMD is not available or is not operating as expected. The set of tests and trials is based upon the CMD manufacturer claims, such as the DS group(s) targeted by the CMD, and known limitations, including those based upon the salinity of the sample water. NOTE Additional tests and trials, if required by the end-user, can follow this general test method. Guidance on determining experimental power is found in 7.5. This document provides guidance for customizing the tests to evaluate the claims of the manufacturer or to address optional factors of interest to the end-users. This document does not set or recommend success criteria of any performance metric, as these are appropriately defined by the end-users.

Ships and marine technology — Aquatic nuisance species — Methods for evaluating the performance of compliance monitoring devices for ballast water discharges

23/30420996 DC BS ISO 23745 船舶和海洋技术 船载气象仪器通用规范

BS ISO 23745. Ships and marine technology. General specification for shipborne meteorological instruments

ISO 23780-1:2023 船舶和航海技术 船舶用连续监测 TRO 传感器性能测试程序 第 1 部分：DPD 传感器

This document provides a method to ensure the performance of continuous monitoring TRO sensors, which can be installed in a BWMS or elsewhere in a ship, taking into consideration environmental factors associated with shipboard conditions, such as high salinity, vibration, variation in humidity and temperature, and predictable sea conditions. This document is intended for use by BWMS manufacturers, sensor manufacturers, testing agencies, and ship owners to verify the performance of a TRO sensor unit. This document is intended to provide requirements and guidance for TRO sensors that use the N, N-diethyl-1,4-phenylene diamine (DPD) method. These requirements and guidance are applicable to testing of sensor units in a laboratory prior to installation. This document identifies: — performance characteristics to be defined by manufacturers of TRO sensors used in the shipboard treatment environment (e.g. salinity range); — pre-qualification and performance procedures to document instrument capabilities; — performance test procedures to be used in different environmental conditions.

Ships and marine technology — Procedure for testing the performance of continuous monitoring TRO sensors used in ships — Part 1: DPD sensors

ISO/PRF 3725 船舶和海洋技术“水生公害物种”评估压载水排放合规监测装置性能的方法

Ships and marine technology — Aquatic nuisance species — Methods for evaluating the performance of compliance monitoring devices for ballast water discharges

ISO/DIS 23745 船舶与航海技术《船载气象仪器通用规范》

Ships and marine technology — General specification for shipborne meteorological instruments

ISO/FDIS 23780-1 船舶与航海技术《船舶用连续监测TRO传感器性能试验规程》第1部分：DPD传感器

Ships and marine technology — Procedure for testing the performance of continuous monitoring TRO sensors used in ships — Part 1: DPD sensors

BS ISO 15370:2021+A1:2023 船舶和海洋技术 客船上的低位照明 (LLL) 安排

1   Scope This document specifies the requirements for the approval , installation and maintenance of low-location lighting systems as defined in Chapter II‑2, Regulation 13.3.2.5.1 of the International Convention for the Safety of Life at Sea, 1974 (SOLAS 74), as amended in 2000, and detailed in Chapter 11 of the International Code for Fire Safety Systems (FSS Code).

Ships and marine technology. Low-location lighting (LLL) on passenger ships. Arrangement

ISO 15370:2021/Amd 1:2023 船舶与海上技术.客轮低位照明.布置 修改件1

Ships and marine technology — Low-location lighting (LLL) on passenger ships — Arrangement — Amendment 1