47.080 小型船 标准查询与下载

ISO 8848:2022 小艇.远程机械转向系统

This document specifies design, construction, installation and test requirements for remote mechanical cable steering systems and the output ram interface point to rudders, jet drives, outboard and sterndrive engines for small craft. It is applicable to three distinct classes of steering systems for use on various types of craft: — standard duty steering systems, for small craft with single and twin installations of outboard engines with a total over 15 kW power, and with rudders, sterndrives and water-jet drives; — light duty steering systems, for small craft with a single outboard engine of 15 kW to 40 kW power; — mini-jet steering systems, excluding personal watercraft. NOTE Standard and light duty steering systems are mechanically interchangeable. A standard duty steering system can be used on a craft designed for a light duty system. However, a light duty steering system cannot be used on a craft that requires a standard duty steering system. Mini-jet steering systems are mechanically differentiated from the previously mentioned systems and can only be used on mini-jet craft as defined in this document. This document does not address emergency means for steering the craft.

Small craft — Remote mechanical steering systems

ASTM F1018-22 钢制应急齿轮存放柜标准规范

1.1 This specification covers the design, material, and manufacture of steel emergency gear stowage lockers. 1.2 Emergency gear lockers shall be of four types (see Section 3). 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Specification for Steel Emergency Gear Stowage Locker

BS EN ISO 8666:2020+A11:2021 小工艺品 主要数据

Small craft. Principal data

EN ISO 10087:2022 小型船舶.识别标记.编码体系

This document establishes a coding system to achieve identification of any small craft in terms of: a) identification code of the country of the manufacturer of the craft; b) identification code of the manufacturer; c) serial number; d) month and year of manufacture; e) model year. This document is applicable to small craft of all types and materials, of hull length, LH, up to 24 m.

Small craft - Craft identification - Coding system (ISO 10087:2022)

KS V ISO 11592-2:2022 使用最小推进力和24 m额定推进力的小艇的确定:第2部分:2 m

Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 2: Craft with a length of hull between 8 m and 24 m

KS V ISO 11592-1:2022 小艇.用操纵速度测定最大推进功率额定值.第1部分:船体长度小于8米的小艇

Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m

KS V ISO 11592-2-2022 使用最小推进力和24 m额定推进力的小艇的确定:第2部分:2 m

Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 2: Craft with a length of hull between 8 m and 24 m

KS V ISO 11592-1-2022 小艇.用操纵速度测定最大推进功率额定值.第1部分:船体长度小于8米的小艇

Small craft — Determination of maximum propulsion power rating using manoeuvring speed — Part 1: Craft with a length of hull less than 8 m

ISO 10087:2022 小艇.艇识别.编码系统

This document establishes a coding system to achieve identification of any small craft in terms of: a) identification code of the country of the manufacturer of the craft; b) identification code of the manufacturer; c) serial number; d) month and year of manufacture; e) model year. This document is applicable to small craft of all types and materials, of hull length, LH, up to 24 m.

Small craft — Craft identification — Coding system

DIN EN ISO 11592-2:2022 小型船只 使用操纵速度确定最大推进功率额定值 第2部分：船体长度在 8 m 和 24 m 之间的船只（ISO 11592-2:2021）；德文版 EN ISO 11592-2:2021

This document specifies the requirements for determining the maximum propulsion power rating using maneuvering speed for engine-driven craft with a length of the hull (LH, as defined in ISO 8666) between 8 m and 24 m. This document is applicable to craft with a calculated Froude

Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 2: Craft with a length of hull between 8 m and 24 m (ISO 11592-2:2021); German version EN ISO 11592-2:2021

BS EN ISO 11592-2:2021 小工艺品 使用机动速度确定最大推进功率额定值 船体长度在 8m 至 24m 之间的船舶

What is ISO 11592-2 about?   ISO 11592 discusses standards for the determination of maximum propulsion power rating of small craft. ISO 11592-2 focuses on the craft with a length of a hull.  ISO 11592-2 specifies the requirements for determining the maximum propulsion power rating using manoeuvring speed for engine-driven craft with a length of the hull (LH, as defined in ISO 8666) between 8 m and 24 m.   ISO 11592-2 is applicable to craft with a calculated Froude number (Fn) ≥ 1,1.   Note: ISO 11592-2 does not apply to inflatable craft, craft designed and constructed solely for competitive racing (racing craft), craft primarily designed not to be engine driven  Note: ISO 11592-2 does not specify craft constructional strength requirements related to maximum propulsion power rating and does not guarantee stability under all conditions of seaway, wind, wakes and waves.  Who is ISO 11592-2 for?   ISO 11592-2 on the

Small craft. Determination of maximum propulsion power rating using manoeuvring speed. Craft with a length of hull between 8 m and 24 m

EN ISO 11592-2:2021 小艇机动速度最大功率额定值的确定第2部分:船体长度在8米和24米之间的船舶

This document specifies the requirements for determining the maximum propulsion power rating using manoeuvring speed for engine-driven craft with a length of the hull (LH, as defined in ISO 8666) between 8 m and 24 m. This document is applicable to craft with a calculated Froude number (Fn) ≥ 1,1. This document is not applicable to: — inflatable craft, as defined by ISO 6185-4; — craft designed and constructed solely for competitive racing (racing craft); — craft primarily designed not to be engine driven. This document does not specify craft constructional strength requirements related to maximum propulsion power rating and does not guarantee stability under all conditions of seaway, wind, wakes and waves.

Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 2: Craft with a length of hull between 8 m and 24 m (ISO 11592-2:2021)

PN-EN ISO 8099-1-2018-04 P 小艇 废物处理系统 第1部分：废水保留（ISO 8099-1:2018）

Small craft -- Waste systems -- Part 1: Waste water retention (ISO 8099-1:2018)

DIN EN ISO 8847:2021 小艇. 操舵装置. 钢索和滑轮系统(ISO 8847-2021); 德文版本EN ISO 8847-2021

This document specifies the requirements for the design, installation and testing of cable over pulley steering systems on small craft with or without a propulsion engine(s), and on small craft with outboard engine(s) up to and including 37 kW total power. It specifies the requir

Small craft - Steering gear - Cable over pulley systems (ISO 8847:2021); German version EN ISO 8847:2021

DIN EN ISO 14945:2021 小艇. 建造者铭牌(ISO 14945-2021); 德文版本EN ISO 14945-2021

This document specifies requirements for the uniform display of the information exhibited on the builder's plate of small craft. Personal watercraft are excluded from the Scope of this document.

Small craft - Builder's plate (ISO 14945:2021); German version EN ISO 14945:2021

PN-EN ISO 8849-2021-10 E 小艇 电动舱底泵（ISO 8849:2020）

Small craft -- Electrically operated bilge pumps (ISO 8849:2020)

PN-EN ISO 15083-2020-10 P 小艇 舱底泵系统（ISO 15083:2020）

Small craft -- Bilge-pumping systems (ISO 15083:2020)

LST EN ISO 8847:2021 小艇 舵机 滑轮系统上的电缆（ISO 8847:2021）

Small craft - Steering gear - Cable over pulley systems (ISO 8847:2021)

PN-EN ISO 15084-2018-11 P 小艇 - 锚泊、系泊和牵引 - 优点（ISO 15084:2003）

Small craft -- Anchoring, mooring and towing -- Strong points (ISO 15084:2003)

OENORM EN ISO 10087:2021 小型工艺品 工艺品标识 编码系统（ISO/FDIS 10087:2021）

Small craft - Craft identification - Coding system (ISO/FDIS 10087:2021)