49.025.05 黑色金属合金综合 标准查询与下载

BS EN 3969:2007 航空航天系列 FE-PL1507（40CrMoV12）型钢 空气冶炼 退火的 锻坯 a或D≤350mm

Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D 350 mm

BS EN 3969:2006 航空航天系列.FE-PL1507(40CrMoV12)型钢.空气冶炼.退火的.锻坯.a或D≤350mm

This standard specifies the requirements relating to: Steel FE-PL1507 (40CrMoV12) Air melted Annealed Forging stock a or D ≤ 350 mm for aerospace applications.

Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D ≤ 350 mm

EN 3969:2006 航空航天系列.FE-PL1507(40CrMoV12)型钢.空气融化.退火.铸件坯料.a或D≤350 mm［代替:BSI BS EN 3969］

This standard specifies the requirements relating to:Steel FE-PL1507 (40CrMoV12) Air melted Annealed Forging stock a or D ≤ 350 mm for aerospace applications.

Aerospace series - Steel FE-PL1507 (40CrMoV12) - Air melted - Annealed - Forging stock - a or D <= 350 mm

ECA SP 4942-B-2006 电子连接器接触末端机械多孔测试程序发表为ANSI/EIA/ECA-364-60A

General Methods for Porosity Testing of Contact Finishes for Electrical Connectors and Sockets To be published as ANSI/EIA/ECA-364-60A

General Methods for Porosity Testing of Contact Finishes for Electrical Connectors and Sockets To be published as ANSI/EIA/ECA-364-60A

ECA SP 5114-2005 电子中续插座规范 再确认NSI/EIA-540COOOO, 540CAOOOO, 540CAAA, and 540CAAB

Standards Proposal No. 51 14, Proposed Reaffirmation of ANSI/ EIA-540C000, 540CA00, 540CAAA and 540CAAB “Electrical Relay Socket Specifications” (see table 1 on page iii for individual specification titles and current revision levels)

Electrical Relay Socket Specifications Proposed Reaffirmation for ANSI/EIA-540COOOO, 540CAOOOO, 540CAAA, and 540CAAB

ECA SP 4982-1-2005 电子设备中插座一般规范 发表为ANSI/EIA/ECA-5400000-B

This generic specification applies to electromechanical sockets for use in direct current, analog,and digital applications. This generic specification shall be used in conjunction with the basic specification EM-364 “Electrical Connector Test Procedures I

Generic Specification for Sockets for Use in Electronic Equipment To be published as ANSI/EIA/ECA-5400000-B

ECA SP 5112-2005 电子插座规范 再确认ANSI/EIA-700AOAC, EIA-540AOOO, EIA-540AAOO, EIA-540AAAA, EIA-540ABOO, EIA-540ABAA, EIA-540ACOO, EIA-540ACAA, EIA-540ADOO, EIA-540BOOO, EIA-540BAOO, EIA-540BAAB, EIA-540BAAC, EIA-540DOOO, EIA-540D

Standards Proposal No. 51 12, Proposed Reaffirmation of ANSI/ EIA-700AOAC,EIA-540A000, EIA-540AA00, EIA-540AAAA, EIA-540AB00, EIA-540ABAA,EIA-540AC00, EIA-540ACAA, EIA-540AD00, EIA-540B000, EIA-540BA00,E IA-540 BAAB, E IA-540BAACI EIA-540D000, E IA-540DA0

Electrical Socket Specifications Proposed Reaffirmation of ANSI/EIA-700AOAC, EIA-540AOOO, EIA-540AAOO, EIA-540AAAA, EIA-540ABOO, EIA-540ABAA, EIA-540ACOO, EIA-540ACAA, EIA-540ADOO, EIA-540BOOO, EIA-540BAOO, EIA-540BAAB, EIA-540BAAC, EIA-540DOOO, EIA-540D

ECA SP 5083-2005 电子接头和插座的测试程序 发表为 ANSI/EIA-364-5, 7, 8, 24, 25, 27, 37, 40, 44, 79, 85, 87, 88, 93, 94, 97,和98

This document is an EIA Engineering Standards Proposal, rather than an interim or final Standard. It is published for purposes of comment and is subject to further review and modification by the EIA Engineering Department Executive Committee (EDEC), whi

Test Procedures for Electrical Connectors and Sockets To be published as ANSI/EIA-364-5, 7, 8, 24, 25, 27, 37, 40, 44, 79, 85, 87, 88, 93, 94, 97, and 98

ECA ECCB-954-2005 电器电子元器件与产品危害物质减免标准与要求

This Standard and its requirements are based on the belief that the achievement of Hazardous Substance Free (HSF) products and production processes cannot be realized without an effective integration of management disciplines. This Standard is a supplemen

Electrical and Electronic Components and Products Hazardous Substance Free Standard and Requirements

ECA EIA_ECCB-952-2004 电子零件及相关设备铅含量的确定标准计划

This document defines the requirements for documenting processes to assure customers and users of given products or sets of products, that their lead content is known. This document does not contain detailed descriptions of the processes to be documented

Standard for Plans to Determine Lead Content of Electronic Components and Related Equipment

ECA EIA-364-62A-2004 TP-62A 电子连接器和插座的终端强度试验规程

This standard establishes test methods to determine the ability of the terminals of an electrical connector to withstand the mechanical stresses likely to be applied during normal assembly operations. This test method is limited to standard flat type thro

TP-62A Terminal Strength Test Procedure for Electrical Connectors, and Sockets

SAE AMS2175-2003 铸件、分类及检验

This specification establishes nondestructive testing methods, sampling frequency, and acceptance criteria for the inspection of metal castings. This specification has been used typically for structural castings, but usage is not limited to such applications.

Castings, Classification and Inspection of

ASTM B117-02 操作盐雾（雾）装置的标准实施规程

1.1 This practice describes the apparatus, procedure, and conditions required to create and maintain the salt spray (fog) test environment. Suitable apparatus which may be used is described in Appendix X1.1.2 This practice does not prescribe the type of test specimen or exposure periods to be used for a specific product, nor the interpretation to be given to the results.1.3 The values stated in SI units are to be regarded as standard. The inch-pound units in parentheses are provided for information and may be approximate.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Operating Salt Spray (Fog) Apparatus

ECA EIA-741-2002 小型 133.35 mm (5.25 in) 光盘驱动器的规范

This standard defines the dimensions and interconnections of 133.35 mm (5.25 in) small form factor disk drives.The purpose of this standard is to define the external characteristics of small form factor disk drives so that products from different vendors

Specification for Small Form Factor 133.35 mm (5.25 in) Disk Drives [Superseded: ECA SP3877-A, ECA SP3877-A-1]

ECA SP4973-2002 用于电子设备的生产球栅阵列(BGA),低接脚数(不多于1088针)插座的详细规范.评论截止日期2002年4月11日 EIA-540BOAB

This specification covers interconnect systems typically used for production ball grid array (BGA) devices with pin counts of 1088 and less.

Proposed New Specification Detail Specification for Production Ball Grid Array (BGA), Low Pin Count (1088 Pins and Less) Socket for Use in Electronic Equipment Comment Period Expires: April 11, 2002; Proposed Document Number EIA-540BOAB

ECA SP 4970-2001 用于电子设备的双插两片接触插座的详细规范 发表为ANSI/EIA-540DAAA-A

Standards Proposal No. 4970, Proposed Reaffirmation of ANSI/EIA-54ODAAA-A “Detail Specification for Dual In-Line Two-Piece Contact Socket for Use in Electronic Equipment” BACKGROUND: The CE-3 .O Sockets Committee authorized a Standards Proposal for commi

Detail Specification for Dual In-Line Two-Piece Contact Socket for Use in Electronic Equipment To be published as ANSI/EIA-540DAAA-A

ECA EIA-540J0AB-2001 用于电子设备的触点式空间电池座的详细规范

The cylindrical battery holders of assessed quality covered by this Detail Specification have Maximum enclosure dimensions as shown in figure 2.

Detail Specification for Coin Cell Battery Holders for Use in Electronic Equipment

SAE AMS5916-2001 合金、耐腐蚀和耐热、薄板、带材和板材 35Fe 24Cr 37Ni 0.65Cb 0.2N 退火

This specification covers a corrosion and heat resistant alloy in the form of sheet, strip, and plate. These products have been used typically for parts requiring corrosion and oxidation resistance up to 1800 °F (982 °C), and relatively high strength up to 1500 °F (816 °C), but usage is not limited to such applications.

Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 35Fe 24Cr 37Ni 0.65Cb 0.2N Annealed

ECA EIA-540B0AA-A-2001 用于电子设备的1.27mm空间的BGA插座的详细规范

This specification covers interconnect systems typically used for production ball grid array (BGA) devices with pin counts of 1089 and greater.

Detail Specification for Production Ball Grid Array (BGA) High Pin Count (1089 Pins and Greater) Socket for Use in Electronic Equipment Revision of EIA-540B0AA

ECA 540HAAA-2000 电子设备用圆栅极阵列器件烧进插孔的详细规范

The ball grid array (BGA) burn-in sockets of assessed quality covered by this Detail Specification have Maximum enclosure dimensions as shown in figure 2.

Detail Specification for Burn-In Sockets Used with Ball Grid Array Devices for Use in Electronic Equipment