49.030.20 螺栓、螺钉、螺柱 标准查询与下载

GSO ISO 9152:2013 航空 MJ钛合金螺纹螺钉 强度等级1100 MPa 采购规格

  Scope is not provided for this standard

Aerospace -- Bolts, with MJ threads, in titanium alloys, strength class 1100 MPa -- Procurement specification

GSO ISO 7403:2013 航空航天 花键驱动 扳手配置 公制系列

  Scope is not provided for this standard

Aerospace -- Spline drives -- Wrenching configuration -- Metric series

SAE AS3252D-2013 镍合金镀银PD柄钻孔机械双六角扩展垫圈头螺栓UNS N07718, 185 KSI MIN,.3125-24 UNJF-3A

Bolt, Machine-Double Hexagon Extended Washer Head, Drilled, PD Shank, Silver Plated, Nickel Alloy, UNS N07718, 185 KSI MIN,.3125-24 UNJF-3A

SAE AS128687A THRU AS128998A-2013 直线型钻孔螺栓.3125-18UNS X .3125-24UNF-3A

Stud Straight, Drilled, .3125-18UNS X .3125-24UNF-3A

SAE AS151701B THRU AS152000B-2013 1.5直径镀镉钢制啮合式阶梯状螺柱UNS G87400, .5000-13 UNS X .4375-20 UNF-3A

Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .5000-13 UNS X .4375-20 UNF-3A

SAE AS129293A-2013 直线型缩腰螺栓.3750-16 UNS X.3750-24UNF-3A

Stud- Straight, Waisted, .3750-16 UNS X .3750-24UNF-3A

SAE AS126881A THRU AS127192A-2013 螺栓.直线型颈状.3750-16UNS X .3750-24UNF-3A

Stud - Straight, Necked, .3750-16UNS X .3750-24UNF-3A

SAE AS128687A-2013 直线型钻孔螺栓.3125-18UNS X.3125-24UNF-3A

Stud Straight, Drilled, .3125-18UNS X .3125-24UNF-3A

SAE AS154701A-2013 2直径啮合式阶梯状螺柱.2500-20UNS X.1900-32UNF-3A

Stud, Stepped, 2 Dia Engagement .2500-20UNS X .1900-32UNF-3A

SAE AS154701A THRU AS155000A-2013 2直径啮合式阶梯状螺柱.2500-20UNS X .1900-32UNF-3A

Stud, Stepped, 2 Dia Engagement .2500-20UNS X .1900-32UNF-3A

SAE AS151701B-2013 1.5直径镀镉钢制啮合式阶梯状螺柱UNS G87400.5000-13 UNS X.4375-20 UNF-3A

Stud, Stepped, 1.5 Dia Engagement, Cadmium Plated, Steel UNS G87400, .5000-13 UNS X .4375-20 UNF-3A

SAE AS127193A-2013 螺栓.直型、缩腰型.4375-14 X.4375-20UNF-3A

Stud - Straight, Waisted, .4375-14 X .4375-20UNF-3A

SAE AS126881A-2013 螺栓.直线型颈状.3750-16UNS X.3750-24UNF-3A

Stud - Straight, Necked, .3750-16UNS X .3750-24UNF-3A

SAE AS129293A THRU AS129604A-2013 直线型缩腰螺栓.3750-16 UNS X .3750-24UNF-3A

Stud- Straight, Waisted, .3750-16 UNS X .3750-24UNF-3A

SAE AS128363A-2013 螺栓.直型钻孔.2500-20UNS X.2500-28UNF-3A

Stud--Straight, Drilled, .2500-20UNS X .2500-28UNF-3A

SAE AS127193A THRU AS127492A-2013 螺栓.直型、缩腰型,.4375-14 X.4375-20UNF-3A

Stud - Straight, Waisted, .4375-14 X .4375-20UNF-3A

SAE AS128363A THRU AS128686A-2013 螺柱.直型钻孔.2500-20UNS X .2500-28UNF-3A

Stud--Straight, Drilled, .2500-20UNS X .2500-28UNF-3A

SAE AS7467B-2013 标定应力断裂性的拉伸强度185 ksi的UNS N07718镍合金螺栓和螺钉采购规范

This procurement specification covers bolts and screws made from a corrosion and heat resistant age hardenable nickel base alloy of the type identified under the Unified Numbering System as UNS N07718. The following specification designations and their properties are covered: AS7467 185 ksi minimum ultimate tensile strength at room temperature; 145 ksi minimum ultimate tensile strength at 1200 degrees F; 100 ksi stress rupture strength at 1200 degrees F; AS7467-1 185 ksi minimum ultimate tensile strength at room temperature; 111 ksi minimum ultimate shear strength at room temperature. Primarily for aerospace propulsion system applications where a good combi

Bolts and Screws, Nickel Alloy, UNS N07718 Tensile Strength 185 ksi Stress Rupture Rated Procurement Specification

SAE AS3152A-2013 机械螺栓.AMS 4967 (UNS R56400), 160 KSI,.5000-20 UNJF-3A紧公差柄双六角延展垫圈头

Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967 (UNS R56400), 160 KSI, .5000-20 UNJF-3A

SAE AS3149A-2013 机械螺栓.AMS 4967 (UNS R56400) 160 KSI,.3125-24 UNJF-3A紧公差柄双六角延展垫圈头

Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, AMS 4967 (UNS R56400) 160 KSI, .3125-24 UNJF-3A