49.030.20 螺栓、螺钉、螺柱 标准查询与下载

SAE AS7474C-2011 抗腐蚀钢制成的抗卡强度为140 ksi的螺母和螺钉的采购规范(UNS S17400)

This specification covers bolts and screws made from a corrosion and heat resistant, martensitic iron base alloy of the type identified under the Unified Numbering System as UNS S17400. The following specification designations and their properties are covered: AS7474 140 ksi minimum ultimate tensile strength at room temperature 100 ksi stress corrosion test 72 ksi to 7.2 ksi tension-tension fatigue; AS7474-1 140 ksi minimum ultimate tensile strength at room temperature 100 ksi stress corrosion test 88 ksi minimum ultimate shear strength at room temperature. Primarily for aerospace propulsion system applications where corrosion resistance and high strength in tension is required in temperatures not to exceed 600 °F.

Bolts and Screws, Steel Corrosion Resistant, UNS S17400 Tensile Strength 140 ksi Procurement Specification

SAE AS9705B-2011 用抗热和耐腐蚀钢制成的双重加工六角垫圈头伸长钻孔螺栓(.1900-32 UNJF-3A)

Bolt, Machine-Double Hexagon, Extended Washer Head, Drilled, Corrosion and Heat Resistant Steel, .1900-32 UNJF-3A

SAE AS3418A-2011 双重机械加工六角头伸长垫圈头,且带有紧公差并的螺母,UNS NO7718.2500-28UNJF-3A(抗应力裂变)

Bolt, Machine, Double Hex, Ext Washer Head, Close Tolerance Shank, UNS N07718, .2500-28UNJF-3A (Stress Rupture Resistant)

SAE AS3420A-2011 双重机械加工六角头伸长垫圈头,且带有紧公差并的螺母,UNS NO7718.3750-24 UNJF-3A(抗应力裂变)

Bolt, Machine, Double Hex, Ext Washer Head, Close Tolerance Shank, UNS N07718 .3750-24 UNJF-3A (Stress Rupture Resistant)

SAE AS3417A-2011 双重机械加工六角头伸长垫圈头,且带有紧公差并的螺母,UNS NO7718.1900-32 UNJF-3A(抗应力裂变)

Bolt, Machine, Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS N07718, .1900-32 UNJF-3A (Stress Rupture Resistant)

SAE AS7477E-2011 拉伸强度为130 ksi的UNS S66286钢制螺栓和螺钉采购规范

This document covers bolts and screws made from a corrosion and heat resistant, precipitation hardenable iron base alloy of the type identified under the Unified Numbering System as UNS S66286. The following specification designations and their properties are covered: AS7477: 130 ksi minimum ultimate tensile strength at room temperature 70 ksi stress-rupture strength at 1200 °F; and AS7477-1: Inactive for Design; AS7477-2: 130 ksi minimum ultimate tensile strength at room temperature 78 ksi minimum ultimate shear strength at room temperature. Classification: 130 ksi minimum tensile strength at room temperature 1200 °F maximum test temperature of parts. Primarily for aerospace propulsion system applications where a good combination of fatigue resistance, tensile strength, shear strength, and resistance to relaxation at elevated temperatures is required.

Bolts and Screws, Steel, UNS S66286 Tensile Strength 130 ksi, Procurement Specification

SAE AS7473B-2011 滚有螺纹的螺母和螺钉的采购规范

This procurement specification covers bolts and screws made from carbon steels, high expansion steels, or corrosion and heat resistant steels of the type identified under the Unified Numbering System as follows: a. UNS K00802 carbon steel (AMS 5061); b. UNS K91505 high expansion steel (AMS 5624); c. UNS K91456 high expansion steel (AMS 5625); d. UNS S32100 corrosion and heat resistant steel (AMS 5645); and e. UNS S34700 - corrosion and heat resistant steel (AMS 5646).

Bolts and Screws, Roll Threaded Procurement Specification for

SAE AS9696E-2011 最小值为165 KSI的UNS N07001耐腐蚀和耐热钢PD杆双六角扩展垫圈头机器螺栓.1900-32 UNJF-3A

Bolt, Machine - Double Hexagon, Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 KSI MIN, .1900-32 UNJF-3A

SAE AS9207B-2011 最小值为195 KSI的UNS K14675双六角扩展垫圈头镍镉扩散镀层钢制机器螺栓.1640-36 UNJF-3A

Screw, Machine - Steel, Diffused Nickel - Cadmium Plated, Double Hexagon Extended Washer Head, UNS K14675 195 KSI MIN, .1640-36 UNJF-3A

SAE AS3416A-2011 UNS N07718 PD杆六角头机器螺栓.3750-24 UNJF-3A(应力断裂抗性)

Bolt, Machine-Hexagon Head, PD Shank UNS N07718, .3750-24 UNJF-3A (Stress Rupture Resistant)

DIN 65461:2011 航空航天.温度高至235℃标称抗拉强度1,100 MPa的带有MJ螺纹,捕捉环锁的钢制双头螺钉

Aerospace - Studs with MJ thread, captive ring lock, steel, nominal tensile strength 1 100 MPa, for temperature up to 235 °C

SAE AS116961B THRU AS117000B-2011 螺钉.椭圆的圆筒形带孔螺钉头.138-32

Screw - Oval Fillister Drilled Head, .138-32

SAE MA3375C-2011 符合UNS S66286 900 MPa抗拉强度公制采购规范的耐腐蚀和耐热钢螺栓

This document covers metric studs made from a corrosion and heat resistant, age hardenable iron base alloy of the type identified under the Unified Number System as UNS S66286. The following specification designations and their properties are covered: MA3375 900 MPa minimum ultimate tensile strength at room temperature; MA3375-1 900 MPa minimum ultimate tensile strength at room temperature, 480 MPa stress-rupture strength at 650 degrees C; MA3375-2 900 MPa minimum ultimate tensile strength at room temperature, 590 MPa minimum ultimate shear strength at room temperature. Two types of studs are covered as follows: Type I - studs with stud end thread having special oversize pitch diameter and lead thread with undersize pitch diameter, while nut end thread is standard size; and Type II - studs with stud end thread and nut end thread standard size.

Studs, Corrosion and Heat Resistant Steel, UNS S66286 Tensile Strength 900 MPa, Procurement Specification, Metric

SAE AS3415A-2011 UNS N07718 PD杆六角头机器螺栓.3125-24 UNJF-3A(应力断裂抗性)

Bolt, Machine-Hexagon Head, PD Shank, UNS N07718, .3125-24 UNJF-3A (Stress Rupture Resistant)

NF L24-215*NF EN 3687:2011 航空航天系列.镀银耐热钢制FE-PA92HT (A286)长螺纹细杆标准六角头螺栓.分类:1100 MPa/650℃

Aerospace series - Bolts, normal hexagon head, relieved shank, long thread, in heat resisting steel FE-PA92HT (A286), silver plated - Classification : 1 100MPa / 650 oC

SAE AS91111B-2011 不对称的S66286每平方英寸千磅数最小为130,.2500-28 UNJF-3A的带紧公差柄的机加工的双六角扩展头垫圈螺栓

Bolt, Machine - Double Hexagon Extended Washer Head, Close Tolerance Shank, UNS S66286 130 KSI MIN, .2500-28 UNJF-3A

DIN 65540:2011 航空航天.带内细齿和MJ螺纹,短螺纹,钛合金制,标称抗拉强度1,100 MPa,温度315℃以下的凸圆头螺栓

Aerospace - Cheese head bolts, with internal serration and MJ-thread, reduced shank, titanium alloy - Nominal tensile strength 1 100 MPa, for temperatures up to 315 °C

DIN 65462:2011 航空航天.温度高至315℃抗张强度1,100 MPa的带有捕捉环锁,MJ螺纹的耐蚀钢双头螺柱

Aerospace - Studs with MJ thread, captive ring lock, corrosion-resisting steel, tensile strength 1 100 MPa, for temperature up to 315 °C

DIN 65539:2011 航空航天.带内细齿和MJ螺纹,短螺纹,镍合金制,标称抗拉强度1,250MPa,温度最高达315℃/425℃的凸圆头螺栓

Aerospace - Cheese head bolts, with internal serration and MJ-thread, reduced shank, nickel alloy, nominal tensile strength 1 250 MPa, for temperatures up to 315 °C/425 °C

SAE AS3414A-2011 UNS N07718 PD杆六角头机器螺栓.2500-28 UNJF-3A(应力断裂抗性)

Bolt, Machine-Hexagon Head, PD Shank, UNS N07718 .2500-28 UNJF-3A (Stress Rupture Resistant)