49.030.20 螺栓、螺钉、螺柱 标准查询与下载

DS/EN 4136/AC:2010 航空航天系列 螺栓，普通双六角头，粗公差普通柄，长螺纹，合金钢，镀镉 分类：1100 MPa（在环境温度下）/ 235°C

This standard specifies the characteristics of bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated.Classification: 1 100 MPa ) / 235 °C )

Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

BS 2A 260-2A 265:2010 航空航天系列.带ISO公制螺纹的平头和100°埋头孔槽头螺钉规范

This British Standard specifies requirements for pan and 100° countersunk slotted head screws with ISO metric threads. The screws are primarily intended for use on non-structural aerospace applications.

Aerospace series. Specification for pan and 100° countersunk slotted head screws with ISO metric screw threads

SAE AS9696C-2010 机械螺栓.双重六角形,扩口垫圈头,PD柄,UNS N07001, 165 KSI MIN耐腐蚀耐高温钢.1900-32 UNJF-3A

Bolt, Machine - Double Hexagon, Extended Washer Head, PD Shank, Corrosion and Heat Resistant Steel, UNS N07001, 165 KSI MIN, .1900-32 UNJF-3A

DIN EN 4161:2010 航空航天系列.镀镉合金钢长螺纹粗公差标称柄偏头十字形凹槽平头螺钉.等级:1100 MPa(室温)/235℃.德文和英文版本EN 4161-2009 + AC-2010

The document specifies the characteristics of screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated. Classification: 1100 MPa/235 ФC.

Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4161:2009 + AC:2010

DIN EN 4129:2010 航空航天系列.镉涂层的合金钢制普通六角头紧公差标准柄中等长度螺纹螺栓.等级:1100 MPa(环境温度)/235°C.德文和英文版本EN 4129-2009 + AC-2010

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 4129:2009 + AC:2010

DIN EN 4130:2010 航空航天系列.用离子气相沉积法(IVD)镀铝的钛合金制紧公差标准柄标准六角头中长螺纹螺栓.等级:在425℃环境温度下1100 MPa.德文和英文版本EN 4130-2009 + AC-2010

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1100 MPa (at ambient temperature)/425 °C; German and English version EN 4130:2009 + AC:2010

DIN EN 4131:2010 航空航天系列.耐热镍基合金铝IVD涂层,标准六角边头松公差普通柄短螺纹螺栓.等级:1250 MPa(环境温度)/425℃.德文和英文版本EN 4131-2009 + AC-2010

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1250 MPa (at ambient temperature)/425 °C; German and English version EN 4131:

DIN EN 2606:2010 航空航天系列. 60°带锁环的螺纹适配器. 几何结构; 德文和英文版本EN 2606: 2009

Aerospace series - 60° interface for adaptors, threaded, with lockring - Geometric configuration; German and English version EN 2606:2009

SAE AS7456B-2010 经热处理的滚螺纹低合金钢螺柱

This procurement specification covers aircraft quality studs made from a low alloy steel of the type identified under the Unified Numbering System as UNS G87400, and of a series of room temperature tensile strengths ranging from 125 000 psi to 185 000 psi. Primarily for aerospace propulsion system applications in light alloys where good strength is required and the part is protected against corrosion.

Studs, Steel, Low Alloy Heat Treated, Roll Threaded

SAE AS7472A-2010 抗拉强度为125,000 psi的滚螺纹耐蚀钢螺栓和螺钉

This procurement specification covers aircraft quality bolts and screws made from a corrosion resistant austenitic iron base alloy of the type identified as SAE 20302 and of 125 000 psi tensile strength at room temperature. Primarily for aerospace propulsion system applications where a good corrosion resistance and moderate strength is required.

Bolts and Screws, Steel, Corrosion Resistant 125 000 psi Tensile Strength Roll Threaded

SAE AS3322D-2010 AMS 5731耐蚀钢环锁直型螺.375-16UNJC X .375-24UNJF

Stud - Straight, Ring Locked, CRES AMS 5731, .375-16UNJC X .375-24UNJF

NF L24-173:2010 航空航天系列.镀镉的合金钢制中等长度螺纹的、粗公差标准柄高扭矩十字槽平头螺钉.分类:1100 MPa (室温)/235 ℃

Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC.

NF L24-168:2010 航空航天系列.MoS2润滑阳极氧化的钛合金制中等长度螺纹粗公差标准柄六瓣凹槽平头螺钉.分类:1100 MPa(室温)/315℃

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315 oC.

NF L24-169:2010 航空航天系列.镀镉的合金钢长螺纹粗公差标准柄偏置十字形凹槽平头螺钉.分类:1100 PMa(室温)/235℃

Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 PMa (at ambient temperature) / 235 oC.

LST EN 4130-2009/AC-2010 航空航天系列 螺栓，普通六角头，粗公差普通柄，中等长度螺纹，钛合金，铝 IVD 涂层 分类：1 100 MPa（在环境温度下）/ 425°C

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

LST EN 4129-2009/AC-2010 航空航天系列 螺栓，普通六角头，粗公差普通柄，中等长度螺纹，合金钢，镀镉 分类：1100 MPa（在环境温度下）/ 235°C

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

LST EN 4161-2010/AC-2010 航空航天系列 合金钢镀镉粗公差普通柄长螺纹十字槽盘头螺钉 等级：1 100 MPa（环境温度下）/235°C

Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

LST EN 4131-2009/AC-2010 航空航天系列 螺栓，标准六角头，粗公差标准柄，中等长度螺纹，耐热镍基合金，IVD 涂层铝 分类：1 250 MPa（在环境温度下）/ 425°C

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 °C

DS/EN 4129/AC:2010 航空航天系列 螺栓，普通六角头，粗公差普通柄，中等长度螺纹，合金钢，镀镉 分类：1100 MPa（在环境温度下）/ 235°C

This standard specifies the characteristics of bolts, normal hexagonal head, coarse tolerance normal shank,medium length thread, in alloy steel, cadmium plated.Classification: 1 100 MPa 1)/ 235 °C 2)

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

DS/EN 4130/AC:2010 航空航天系列 螺栓，普通六角头，粗公差普通柄，中等长度螺纹，钛合金，铝 IVD 涂层 分类：1 100 MPa（在环境温度下）/ 425°C

This standard specifies the characteristics of bolts, normal hexagonal head, coarse tolerance normal shank,medium length thread, in titanium alloy, aluminium IVD coated.Classification: 1 100 MPa 1) / 425 °C 2)

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C