49.030.20 螺栓、螺钉、螺柱 标准查询与下载

SAE AS7459B-2009 抗拉强度为260ksi和额定应力断裂的UNS R30159钢制螺栓和螺钉的采购规范

This procurement specification covers bolts and screws made from a low alloy, heat resistant steel of the type identified under the Unified Numbering System as UNS K14675, having UNJ profile threads. The following specification designations and their properties are covered: AS7459 195 ksi minimum ultimate tensile strength at room temperature; 145 ksi minimum ultimate tensile strength at 900 degrees F; 105 ksi stress rupture strength at 900 degrees F for 100 hours; 100 ksi tension to 10 ksi tension fatigue at room temperature; Protective treatment to be specificed on part drawing; AS7459-1 AS7459 part plated per AMS 2416, nickel-cadmium diffused plating; AS7495-2 195 ksi minimum ultimate tensile strength at room temperature; 117 ksi minimum ultimate shear strength at room temperature; protective treatment to be specified on part drawing; AS7495-3 AS7495-2 part plated per AMS 2416, nickel-cadmium diffused plating. Primarily for aerospace propulsion system applications where high strength at temperatures up to approximately 900 °F is required and the part is protected against corrosion.

Bolts and Screws, Steel UNS K14675 Tensile Strength 195 ksi Fatigue and Stress-Rupture Rated Procurement Specification

DS/EN 4163:2009 航空航天系列 螺钉 100° 标准沉头，偏移十字形凹槽，粗公差标准柄，长螺纹，合金钢，镀镉 1 100 MPa（在环境温度下）/ 235°C

This European Standard specifies the characteristics of screws, 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated.Classification : 1 100 MPa / 235 °C.

Aerospace series - Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - 1 100 MPa (at ambient temperature) / 235 °C

DS/EN 4138:2009 航空航天系列 螺钉，平头，偏移十字形凹槽，粗公差标准柄，中等长度螺纹，合金钢，镀镉 分类：1 100 MPa（在环境温度下）/ 235°C

This European Standard specifies the characteristics of screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated.Classification: 1 100 MPa / 235 °C.

Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature) / 235 °C

DS/EN 4161:2009 航空航天系列 螺钉，平头，偏移十字形凹槽，粗公差标准柄，长螺纹，合金钢，镀镉 分类：1 100 PMa（在环境温度下）/ 235°C

This European Standard specifies the characteristics of screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated.Classification: 1 100 MPa / 235 °C.

Aerospace series - Screws, pan head, offset cruciform recess, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 PMa (at ambient temperature) / 235 °C

DS/EN 4073:2009 航空航天系列 螺钉，平头，六瓣凹槽，粗公差标准柄，中等长度螺纹，合金钢，镀镉 等级 1 100 MPa（在环境温度下）/ 235°C

This European Standard specifies the characteristics of screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated.Classification: 1 100 MPa / 235 °C.

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification 1 100 MPa (at ambient temperature) / 235 °C

ISO 12256:2002/Cor 1:2009 航空航天.内十字形槽扳手.米制系列 技术勘误表1

Aerospace — Drives, internal, cruciform, ribbed — Metric series — Technical Corrigendum 1

NF L24-127*NF EN 4131:2009 航空航天系列.螺栓,正规六角螺栓头,在热稳定铝IVD涂层镍基合金涂层下的正规六角低精度公差标准柄中等长度螺纹螺栓.分类:1 250 MPa(环境温度)/425 oC.

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification : 1 250 MPa (at ambient temperature)/425 oC.

NF L24-172*NF EN 4636:2009 航空航天系列.100°沉头型、六角形凹槽、短螺纹钛合金TI-P64001,铝颜料涂覆螺丝.分类:1100 MPa(环境温度)/315 ℃.

Aerospace series - Screws, 100 o countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating - Classification : 1 100 MPa (at ambient temperature)/315 oC.

LST EN 4071-2009 航空航天系列 螺栓，普通六角头，紧公差普通柄，短螺纹，钛合金，铝 IVD 涂层 分类：1 100 MPa（在环境温度下）/ 425°C

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

LST EN 4072-2009 航空航天系列 钛合金、IVD 涂层铝制 100° 标准沉头、偏移十字形凹槽、紧公差标准柄、短螺纹螺钉-分类：1 100 MPa（在环境温度下）/425°C

Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

LST EN 4128-2009 航空航天系列 螺栓，标准六角头，粗公差标准柄，短螺纹，耐热镍基合金，IVD 涂层铝 分类：1 250 MPa（在环境温度下）/ 425°C

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 °C

LST EN 4127-2009 航空航天系列 螺栓，标准六角头，粗公差标准柄，短螺纹，钛合金，IVD 涂层铝 分类：1 100 MPa（在环境温度下）/ 425°C

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

LST EN 4074-2009 航空航天系列 螺钉，平头，六叶槽，粗公差标准柄，中等长度螺纹，钛合金，铝 IVD 涂层 分类：1 100 MPa（在环境温度下）/ 425°C

Aerospace series - Screws, pan head, six lobe recess, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

LST EN 3052-2009 航空航天系列 螺栓，普通六角头，紧公差普通柄，短螺纹，耐热和耐腐蚀钢，钝化的 分类：1 100 MPa（在环境温度下）/ 425°C

Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature) / 425 °C

LST EN 4137-2009 航空航天系列 螺栓，普通双六角头，阶梯柄，长螺纹，钛合金，阳极氧化，MoS2 润滑的 分类：1 100 MPa（在环境温度下）/ 315°C

Aerospace series - Bolts, normal bi-hexagonal head, stepped shank, long thread, in titanium alloy, anodized, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C

LST EN 3613-2009 航空航天系列 镀银耐热镍基合金 NI-PH2601（Inconel 718）长螺纹正六角头螺栓

Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 275 MPa/650 °C

LST EN 3614-2009 航空航天系列 耐热钢 FE-PA2601（A286）镀银长螺纹普通六角头螺栓 等级：900 MPa / 650°C

Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting steel FE-PA2601 (A286), silver plated - Classification: 900 MPa / 650 °C

LST EN 4132-2009 航空航天系列 螺栓，普通六角头，粗公差普通柄，长螺纹，合金钢，镀镉 分类：1100 MPa（在环境温度下）/ 235°C

Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 °C

LST EN 4635-2009 航空航天系列 耐热镍基合金 NI-PH2601（因科镍合金 718）制成的 100° 沉头、六瓣凹槽、短螺纹螺钉-分类：1 270 MPa（在环境温度下）/650°C

Aerospace series - Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 270 MPa (at ambient temperature) / 650 °C

LST EN 2883-2009 航空航天系列 螺母，六角形，自锁，带沉孔和防松垫圈，耐热钢，MoS2 润滑-分类：1 100 MPa（在环境温度下）/ 315°C

Aerospace series - Nuts, hexagonal, self-locking, with counterbore and captive washer, in heat resisting steel, MoS2 lubricated - Classification: 1 100 MPa (at ambient temperature) / 315 °C