共找到 2327 条与 航空航天制造用零部件 相关的标准,共 156 页
Aerospace-Accessory drives and mounting flanges(Metric series)-Part 1:Design criteria
Scope is unavailable.
BEARING, ROLLER, NEEDLE, TRACK ROLLER, SEALED, TYPE X, ANTIFRICTION, INCH
Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series; German and English version EN 4266:2013
This European Standard specifies the characteristics of spherical plain bearings, metal to metal, in corrosion resisting steel, cadmium plated and chromated, wide series, inch series for aerospace applications. They are intended for use in fixed or moving
Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series
This standard covers the requirements for spherical, self-aligning, self-lubricating, bearings which are for use in the ambient temperature range of -65 to +160 degree F (-54 to 71 degree C) at high cyclic speeds 300 cpm (13 fpm) for liners with a thickness less than 0.015 inch. The scope of this standard is to provide a liner system qualification procedure for helicopter sliding bearings defined and controlled by source control drawings. Once a liner system is qualified, the source-controlled bearings are further tested under application conditions. Under Department of Defense (DoD) Policies and Procedures, any qualification requirements and associated Qua
Bearings, Plain, Self-Aligning, Self-Lubricating, 300 cpm (13 fpm) -65 to +160 degree F (-54 to +71 degree C), Liners Less than 0.015 Inches
The reason for creating this standard is to quality bearings for use in tail rotor bearing applications. The standard also incorporates an ""A"" part number designation for a new liner system that has 2-1/2 times the life of the standard liner system.
Bearings, Plain, Self-Aligning, Self-Lubricating, 1400 cpm (15 fpm), Oscillation, -65 to +160 degree F (-54 to +71 degree C)
The reason for creating this standard is to quality bearings with a liner thickness less than .015 inches for use in main rotor bearing applications. The standard also incorporates an ""A"" part number designation for a new liner system that has 2-1/2 times the life of the standard liner system.
Bearings, Plain, Self-Aligning, Self-Lubricating, 300 cpm (13 fpm), Oscillation, -65 to +160 degree F, Liners Less than .015 Inch Thick
Aerospace series. Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated. Wide series. Dimensions and loads. Inch series
O-Ring, Molded from AMS 7379 Rubber for Use with AS 5205 Ports
This European Standard specifies the characteristics of spherical plain bearings, metal to metal, in corrosion resisting steel, cadmium plated and chromated, wide series, inch series for aerospace applications. They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms. They shall be used in the temperature range - 54 °C to 150 °C. As they are lubricated by means of the following greases: Code A: Grease as per MIL-PRF-23827C, operating temperature range - 73 °C to 121 °C; Code B: Grease as per MIL-PRF-81322G, operating temperature range - 54 °C to 177 °C. The range of application for bearings lubricated with grease per code A is limited to 121 °C. In both cases the spherical surface of the outer or inner ring have to be provided with a dry-film lubricant as per MIL-PRF-46010G or equivalent (anti-seizing protection). The slide hole treatment either at the outer ring or inner ring.
Aerospace series - Bearing spherical plain, metal to metal, in corrosion resisting steel, cadmium plated - Wide series - Dimensions and loads - Inch series
Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series; German and English version EN 4265:2013
This European Standard specifies the characteristics of spherical plain bearings, metal to metal, in corrosionresisting steel, passivated, wide series, inch series for aerospace applications.They are intended for use in fixed or moving parts of the aircra
Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series
Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series
This document has been declared ""Stabilized"" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This recommended practice provides certain design requirements and quality assurance provisions for anti-friction bearings intended for use by the aircraft industry. This recommended practice covers single row, radial, deep groove, non-filling slot type ball bearings having tolerance grades 1, 3, 5 and 7, and having varying radial clearances.
Bearing, Ball Annular
Aerospace series. Bearing spherical plain, metal to metal in corrosion resisting steel. Wide series. Dimensions and loads. Inch series
Bearing, Roller, Needle, Double Row, Heavy Duty, Track Roller, Sealed, Type VI, Inch
Bearing, Roller, Needle, Track Roller, Integral Heavy Stud, Type IX, Antifriction, Inch
This European Standard specifies the characteristics of spherical plain bearings, metal to metal, in corrosion resisting steel, passivated, wide series, inch series for aerospace applications.They are intended for use in fixed or moving parts of the aircraft structure and their control mechanisms. They shall be used in the temperature range − 54 °C to 150 °C. As they are lubricated by means of the following greases:Code A: Grease as per MIL-PRF-23827C, operating temperature range − 73 °C to 121 °C.Code B: Grease as per MIL-PRF-81322G, operating temperature range − 54 °C to 177 °C.The range of application for bearings lubricated with grease per code A is lim
Aerospace series - Bearing spherical plain, metal to metal in corrosion resisting steel - Wide series - Dimensions and loads - Inch series
Aerospace series.Bushes with self-lubricating liner.Technical specification; German and English version EN 2311:2012
This European Standard specifies the characteristics of adjustable rod ends with self-aligning double row ball bearing and threaded shank in steel, inner ring and balls in corrosion resisting steel. They consist of: a rod end comprising: either seals or shields; an optional longitudinal groove for locking purpose; an inner ring with balls. These rod ends are intended for use with flight control rods or rods for aerospace structures. They are intended to be used in the temperature range: - 54 °C to 150 °C. However, being lubricated with the following greases: very high pressure grease, ester type (code A), operational range - 73 °C to 121 °C according MIL-PRF-23827 type II; very high pressure grease, synthetic hydrocarbons, general purpose (code B), operational range - 54 °C to 177 °C (see EN 2067), according MIL-PRF-81322; very high pressure grease, lithium type (code C) operational range - 73 °C to 121 °C according MIL-PRF-23827 type I. Their field of application when lubricated with codes A and C grease is limited to 121 °C.
Aerospace series - Rod ends@ with self-aligning double row ball bearings and threaded shank in steel - Inner ring and balls in corrosion resisting steel - Dimensions and loads - Inch series
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号