共找到 2327 条与 航空航天制造用零部件 相关的标准,共 156 页
This standard specifies the characteristics of rigid single row ball bearings in steel, with cadmium-plated flanged alignment housing designed to withstand only slow rotations and oscillations under load. They are intended for use in the hubs of torsion lever and in separated supports for airframe/aerospace applications. The airframe rolling bearings defined in this standard may be used in the temperature range from - 54 ℃ to 150 ℃. However, being lubricated with the following greases (see EN 3727): -- ester type very high pressure grease (code letter A), operating range from - 73 ℃ to 121 ℃ or, -- synthetic hydrocarbons type very high pressure grease general purpose (code letter B) operating range from - 54 ℃ to 177 ℃. Their field of application when lubricated with code letter A grease is limited to 121 ℃.
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated - Dimensions and loads; German and English version EN 3059:2007
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated - Dimensions and loads
Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing - Dimensions and loads
Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads.
BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, WIDE, CHAMFERED RACE, -65 TO +325 °F;TABLE 1 - DIMENSIONS AND STRENGTHS;TABLE 2 - OVERSIZE BEARING DIMENSIONS;TABLE 3 - INTERNAL CLEARANCE
Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Wide, Chamfered Outer Ring, -65° to 325°F
BEARING, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LINED BORE, LOW SPEED, NARROW, GROOVED RACE, -65 TO +325 °F;TABLE 1 - DIMENSIONS AND STRENGTHS;TABLE 2 - OVERSIZE BEARING DIMENSIONS;TABLE 3 - INTERNAL CLEARANCE;
Bearing, Plain, Self-Aligning, Self-Lubricating, Lined Bore, Low Speed, Narrow, Grooved Outer Ring, -65° to 325°F
이 규격은 ISO 8399 시리즈 규격으로, 일차적으로 항공기 기어 박스와 기관 부속 장치
Aerospace-Accessory drives and mounting flanges(Metric series)-Part 2:Dimensions
Aerospace-Accessory drives and mounting flanges(Metric series)-Part 2:Dimensions
Flange, Straight Thread Port, Weld
Flange, Straight Thread Port, Weld
This standard specifies the characteristics of rigid single row ball bearings in corrosion resisting steel with a solid or lightweight flanged alignment housing, designed to withstand only slow rotations and slight oscillations under load.They are intended for use in the hubs of torsion lever and in separated supports for airframe/aerospace applications.The airframe rolling bearings defined in this standard may be used in the temperature range from - 54 °C to 150 °C.However, being lubricated with the following greases (see EN 3727): ester type very high pressure grease (code letter A), operating range from - 73 °C to 121 °C or, synthetic hydrocarbons type v
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing - Dimensions and loads
This standard specifies the characteristics of rigid single row ball bearings, in corrosion resisting steel, reduced internal radial clearance, diameter series 8 and 9 ), designed to withstand only slow rotations and oscillations under load.They are intended for use between fixed and moving parts of the aircraft structure and their control mechanisms.They are intended to be used in the temperature range: - 54 °C to 150 °C.However, being lubricated with the following greases: very high pressure grease, ester type (code A), operational range - 73 °C to 121 °C or very high pressure grease, synthetic hydrocarbons, general purpose (code B), operational range - 5
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel - Diameter series 8 and 9, reduced internal radial clearance - Dimensions and loads
This standard specifies the characteristics of rigid single row ball bearings in steel, with cadmium-plated flanged alignment housing designed to withstand only slow rotations and oscillations under load.They are intended for use in the hubs of torsion lever and in separated supports for airframe/aerospace applications.The airframe rolling bearings defined in this standard may be used in the temperature range from - 54 °C to 150 °C.However, being lubricated with the following greases (see EN 3727): ester type very high pressure grease (code letter A), operating range from - 73 °C to 121 °C or, synthetic hydrocarbons type very high pressure grease general pu
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated - Dimensions and loads
This standard specifies the characteristics of rigid single row ball bearings in steel, cadmium-plated with cadmium plated flanged alignment housing designed to withstand only slow rotations and oscillations under load.They are intended for use in the hubs of torsion lever and in separated supports for airframe/aerospace applications.The airframe rolling bearings defined in this standard may be used in the temperature range from - 54 °C to 150 °C.However, being lubricated with the following greases (see EN 3727): ester type very high pressure grease (code letter A), operating range from - 73 °C to 121 °C or, synthetic hydrocarbons type very high pressure gr
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads
This standard specifies the characteristics of self-aligning double row ball bearings with flanged outer ring in corrosion resisting steel, reduced internal clearance, designed to withstand only slow rotations and oscillations under load.They are intended for use between fixed and moving parts of the aircraft structure and their control mechanisms.They are intended to be used in the temperature range: - 54 °C to 150 °C.However, being lubricated with the following greases: very high pressure grease, ester type (code A), operational range - 73 °C to 121 °C or very high pressure grease, synthetic hydrocarbons, general purpose (code B), operational range - 54 °
Aerospace series - Bearings, airframe rolling - Double row self-aligning ball bearings with flanged outer ring in corrosion resisting steel, reduced internal radial clearance - Dimensions and loads
This standard specifies the characteristics of rigid single row ball bearings in steel, with cadmium-plated flanged alignment housing designed to withstand only slow rotations and oscillations under load. They are intended for use in the hubs of torsion lever and in separated supports for airframe/aerospace applications. The airframe rolling bearings defined in this standard may be used in the temperature range from – 54 °C to 150 °C. However, being lubricated with the following greases (see EN 3727): - ester type very high pressure grease (code letter A), operating range from – 73 °C to 121 °C or, - synthetic hydrocarbons type very high pressure grease general purpose (code letter B) operating range from – 54 °C to 177 °C. Their field of application when lubricated with code letter A grease is limited to 121 °C.
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel with flanged alignment housing, cadmium plated - Dimensions and loads
This standard specifies the characteristics of rigid single row ball bearings in steel, cadmium-plated with cadmium plated flanged alignment housing designed to withstand only slow rotations and oscillations under load. They are intended for use in the hubs of torsion lever and in separated supports for airframe/aerospace applications. The airframe rolling bearings defined in this standard may be used in the temperature range from – 54 °C to 150 °C. However, being lubricated with the following greases (see EN 3727): ester type very high pressure grease (code letter A), operating range from – 73 °C to 121 °C or, synthetic hydrocarbons type very high pressure grease general purpose (code letter B) operating range from – 54 °C to 177 °C. Their field of application when lubricated with code letter A grease is limited to 121 °C.
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in steel, cadmium plated, with flanged alignment housing, cadmium plated - Dimensions and loads
This standard specifies the characteristics of rigid single row ball bearings in corrosion resisting steel with a solid or lightweight flanged alignment housing, designed to withstand only slow rotations and slight oscillations under load. They are intended for use in the hubs of torsion lever and in separated supports for airframe/aerospace applications. The airframe rolling bearings defined in this standard may be used in the temperature range from – 54 °C to 150 °C. However, being lubricated with the following greases (see EN 3727): - ester type very high pressure grease (code letter A), operating range from – 73 °C to 121 °C or, - synthetic hydrocarbons type very high pressure grease general purpose (code letter B) operating range from – 54 °C to 177 °C. Their field of application when lubricated with code letter A grease is limited to 121 °C.
Aerospace series - Bearings, airframe rolling - Rigid single row ball bearings in corrosion resisting steel, with flanged alignment housing - Dimensions and loads
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号