49.040 有关航空航天制造用镀涂和有关工艺 标准查询与下载

SAE AMS2485K-2008 黑氧化层涂层

This specification covers the engineering requirements for producing black oxide coatings on parts. This coating has been used typically to improve the anti-chafing and anti-friction properties of carbon and low-alloy steel parts, particularly sliding or bearing surfaces, by providing a finish coating that retains an oil film, but usage is not limited to such applications.

Coating, Black Oxide

SAE AMS2438C-2007 硬致密沉积物镀薄铬层

This specification covers the engineering requirements thin, hard, dense chromium plating on surfaces of ferrous and nonferrous alloys. This plating has been used typically to provide improved lubricity, wear and/or corrosion resistance to selected materials but usage is not limited to such applications.

Plating, Chromium Thin, Hard, Dense Deposit

KS W 9011-2007 滑翔机用于取下橡胶绳

Rubber rope for glider

DIN EN 2434-005:2007 航空航天系列.涂料和清漆.双组分冷固化聚氨酯光洁度.第005部分:军用高柔性和耐化学试剂性

Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 005: High flexibility and chemical agent resistance for military application; German and English version EN 2434-005:2006

DIN EN 4588:2007 航空航天系列.涂料和清漆.防滑双组分冷加工聚氨酯涂料

Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip; German and English version EN 4588:2007

LST EN 3840-2007 航空航天系列色漆和清漆技术规范

Aerospace series - Paints and varnishes - Technical specification

LST EN 4170-2007 航空航天系列色漆和清漆耐冷裂温度循环测量的试验方法

Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle

DIN EN 3840:2007 航空航天系列.涂料和清漆.技术规范

This standard defines the technical requirements for the qualification, manufacture, inspection and the delivery of paints and varnishes for use in aerospace applications. It shall be applied in conjunction with the EN material specification.

Aerospace series - Paints and varnishes - Technical specification; German and English version EN 3840:2007

DS/EN 3840:2007 航空航天系列色漆和清漆技术规范

This standard defines the technical requirements for the qualification, manufacture, inspection and the delivery of paints and varnishes for use in aerospace applications. It shall be applied in conjunction with the EN material specification.

Aerospace series - Paints and varnishes - Technical specification

DS/EN 4170:2007 航空航天系列色漆和清漆耐冷裂温度循环测量的试验方法

This standard describes a procedure of ageing to assess the resistance of a coated panel (metallic or organic substrate) to a temperature cycle (cold, hot, hot and wet) for aerospace purposes.This test deals with the assessment of the capability of the paint to support modification of internal stresses without any crack formation, peeling or other defects due to modification of the mechanical properties of the paint system.

Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle

SAE AMS2432C-2007 计算机检测的喷丸处理

This specification establishes the engineering requirements for computer monitored peening of parts surfaces. This procedure is used typically to provide a means by which the shot peening process can be performed repeatedly on parts in order to satisfy material component design requirements, but usage is not limited to such applications. Shot peening locations used for intensity verification (Almen test strip locations), media type, media size and peening intensities shall be as specified by the cognizant engineering organization. When any of these parameters are not specified, they shall be established in accordance with 3.2.8 of this specification and listed as process control parameters in accordance with 3.7. Processes, such as tumble peening, slurry peening, peen forming and straightening, peening for prevention of intergranular corrosion, and peening to produce a surface texture, are recognized but their requirements are not covered.

Shot Peening, Computer Monitored

DIN EN 4592:2007 航空航天系列.涂料和清漆.测定红外线反射率的试验方法

This standard specifies the method of test for determining the infrared reflectance of paints and varnishes. The test procedure determines the amount of energy reflected by the material in the range of wavelengths between 700 nanometres and 2400 nanometres with respect to that of a standard reflectance material. The procedure is applicable to products intended for use in aerospace applications.

Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance; German and English version EN 4592:2006

BS EN 4170:2007 航空航天系列.涂料和清漆.防冷裂缝温度循环测量的试验方法

This standard describes a procedure of ageing to assess the resistance of a coated panel (metallic or organic substrate) to a temperature cycle (cold, hot, hot and wet) for aerospace purposes. This test deals with the assessment of the capability of the paint to support modification of internal stresses without any crack formation, peeling or other defects due to modification of the mechanical properties of the paint system.

Aerospace series - Paints and varnishes - Test method for measurement of resistance to cold crack temperature cycle

BS EN 3840:2007 航空航天系列.涂料和清漆.技术规范

This standard defines the technical requirements for the qualification, manufacture, inspection and the delivery of paints and varnishes for use in aerospace applications. It shall be applied in conjunction with the EN material specification.

Aerospace series - Paints and varnishes - Technical specification

LST EN 4588-2007 航空航天系列色漆和清漆双组份冷固化聚氨酯涂料防滑

Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip

SAE AMS2472F-2007 带着色涂层铝合金硫酸工艺的阳极处理

This specification establishes the for dyed anodic coatings on aluminum alloys. This process has been used typically to increase corrosion resistance and to produce colored surfaces on aluminum alloy parts, but usage is not limited to such applications. AMS 2470 or AMS 2471 should be specified for coatings to be used as a base for paint or other organic finishes. This process is not suitable for parts which contain joints or recesses in which the anodizing solution may be retained.

Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Dyed Coating

SAE AMS2431/6C-2007 玻璃珠冲压设备

This specification, in conjunction with the general requirements covered in SAE AMS 2431 establishes the requirements for glass shot to be used for peening of metal parts.

Peening Media Glass Shot

DIN EN 2435-005:2007 航空航天系列.涂料和清漆.含铬酸盐的双组分冷加工底漆的耐腐蚀性.第005部分:军用强耐腐蚀性

This standard defines the requirements for a two component,chromated epoxy,high corrosion resistant primer. The coating shall be suitable for use on chromic acid anodised or conversion coated aluminium alloys and other suitably prepared substrates.

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application; German and English version EN 2435-005:2006

DIN EN 2436-006:2007 航空航天系列.涂料和清漆.不含铬酸盐的双组分冷加工环氧底漆的耐腐蚀性.第006部分:军用强耐腐蚀性

This standard defines the requirements for a two component,chromated and lead free epoxy,high corrosion resistant primer. The coating shall be suitable for use on chromic acid anodised or conversion coated aluminium alloys,fibre reinforced composite materials and other suitably prepared substrates.

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application; German and English version EN 2436-006:2006

SAE AMS2400W-2007 镀镉

This specification covers the requirements for electrodeposited cadmium on metal parts. This process has been used typically to provide corrosion resistance to metal parts, but usage is not limited to such applications.

Plating, Cadmium