49.040 有关航空航天制造用镀涂和有关工艺 标准查询与下载

LST EN 2436-005-2006 航空航天系列色漆和清漆耐腐蚀无铬酸盐双组分冷固化底漆第005部分：具有表面处理公差的外部使用

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 005: For exterior use with surface preparation tolerance

LST EN 2436-006-2006 航空航天系列色漆和清漆耐腐蚀无铬酸盐双组分冷固化环氧底漆第006部分：军用高耐腐蚀性

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing epoxy primer - Part 006: High corrosion resistance for military application

LST EN 2435-001-2006 航空航天系列色漆和清漆耐腐蚀铬酸盐二组分冷固化底漆第001部分：最低要求

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 001: Minimum requirements

LST EN 2435-002-2006 航空航天系列色漆和清漆耐腐蚀铬酸盐二组分冷固化底漆第002部分：高耐腐蚀性

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 002: High corrosion resistance

LST EN 2435-004-2006 航空航天系列色漆和清漆耐腐蚀铬酸盐二组分冷固化底漆第004部分：高耐腐蚀性和耐流体性，具有表面制备公差

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 004: High corrosion and fluid resistance with surface preparation tolerance

LST EN 2435-005-2006 航空航天系列色漆和清漆耐腐蚀铬酸盐二组分冷固化底漆第005部分：军用高耐蚀性

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005: High corrosion resistance for military application

LST EN 2435-003-2006 航空航天系列色漆和清漆耐腐蚀铬酸盐二组分冷固化底漆第003部分：高耐腐蚀性和耐流体性

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003: High corrosion and fluid resistance

NF L16-007-004*NF EN 2436-004:2006 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第004部分:有表面预加工公差的强耐腐蚀性和耐液体性

Aerospace series - Paints and varnishes - Corrosion resistant chromate-free two component cold curing primer - Part 004 : high corrosion and fluid resistance with surface preparation tolerance.

NF L16-006-003:2006 航空航天系列.涂料和清漆.耐腐蚀加铬酸盐双组分冷固化底漆.第003部分:耐强腐蚀和耐渗透性

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 003 : high corrosion and fluid resistance.

NF L16-006-004:2006 航空航天系列.涂料和清漆 耐腐蚀加铬酸盐双组分冷固化底漆.第004部分:有表面预加工公差的强耐腐蚀性和耐液体性

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 004 : high corrosion and fluid resistance with surface preparation tolerance.

BS EN 4406:2006 航空航天系列.颜料和清漆.双组分冷固化聚氨酯涂料.耐磨性

This standard specifies the requirements for a two component polyurethane, abrasion resistant coating available in a range of colours and levels of gloss, to be applied over a primer for aerospace applications offering resistance to wear on sliding surfaces and resistance to impact from solid particles. The properties specified in this standard are obtained on defined aluminium alloy test pieces prepared in accordance with EN 3837 Procedure A and ISO 3270 and painted with primer to EN 2435. The ability of the material to be used for a specific application (e.g. alternative substrate, alternative primer, specific drying conditions etc.) shall be determined by supplementary tests to confirm that the requirements of this standard are met.

Aerospace series - Paints and varnishes - Two component cold curing polyurethane coating - Abrasion resistant

BS EN 4592:2006 航空航天系列.颜料和清漆.红外反射率的测量用试验方法

This standard specifies the method of test for determining the infrared reflectance of paints and varnishes. The test procedure determines the amount of energy reflected by the material in the range of wavelengths between 700 nanometres and 2 400 nanometres with respect to that of a standard reflectance material. The procedure is applicable to products intended for use in aerospace applications.

Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance

DS/EN 4592:2006 航空航天系列色漆和清漆红外反射率测定的试验方法

This standard specifies the method of test for determining the infrared reflectance of paints and varnishes.The test procedure determines the amount of energy reflected by the material in the range of wavelengths between 700 nanometres and 2 400 nanometres with respect to that of a standard reflectance material.The procedure is applicable to products intended for use in aerospace applications.

Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance

DS/EN 4406:2006 航空航天系列色漆和清漆双组份冷固化聚氨酯涂料耐磨

This standard specifies the requirements for a two component polyurethane, abrasion resistant coating available in a range of colours and levels of gloss, to be applied over a primer for aerospace applications offering resistance to wear on sliding surfaces and resistance to impact from solid particles.The properties specified in this standard are obtained on defined aluminium alloy test pieces prepared in accordance with EN 3837 Procedure A and ISO 3270 and painted with primer to EN 2435. The ability of the material to be used for a specific application (e.g. alternative substrate, alternative primer, specific drying conditions etc.) shall be determined by

Aerospace series - Paints and varnishes - Two component cold curing polyurethane coating - Abrasion resistant

NF L16-006-005:2006 航空航天系列.涂料和清漆.铬酸盐耐腐蚀双组分冷固化底漆.第005部分:军用强耐腐蚀性

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 005 : high corrosion resistance for military application.

NF L16-006-002:2006 航空航天系列.涂料和清漆.铬酸盐耐腐蚀双组分冷固化底漆.第02部分:强耐腐蚀性

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 02 : high corrosion resistance.

NF L16-006-001:2006 航空航天系列.涂料和清漆.铬酸盐耐腐蚀双组分冷固化底漆.第001部分:最低要求

Aerospace series - Paints and varnishes - Corrosion resistant chromated two component cold curing primer - Part 001 : minimum requirements.

DS/EN 2436-005:2006 航空航天系列“油漆和清漆”“耐腐蚀无铬双组分冷固化底漆”“005部分：具有表面处理公差的外部使用

This standard specifies the basic requirements for a two component, cold curing, chromate-free epoxy or polyurethane, corrosion resistant primer which can be used with or without a finish for aerospace applications.The properties specified in this standard are obtained on defined aluminium alloy test pieces prepared in accordance with EN 3837, process D and ISO 3270. The ability of the material to be used for a specific application (e.g. alternative substrate, alternative primer, specific drying conditions etc.) shall be determined by supplementary tests to confirm that the requirements of this standard are met.

Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 005: For exterior use with surface preparation tolerance

DS/EN 2436-004:2006 航空航天系列 油漆和清漆 耐腐蚀无铬酸盐双组份冷固化底漆 第004部分：具有表面处理公差的高耐腐蚀性和耐流体性

This standard specifies the basic requirements for a two component, cold curing, chromate-free epoxy or polyurethane, high corrosion and fluid resistant primer with improved tolerance to the standard of surface preparation which can be used with or without a finish for aerospace applications.The properties specified in this standard are obtained on defined aluminium alloy test pieces prepared in accordance with EN 3837, process D and ISO 3270. The ability of the material to be used for a specific application (e.g. alternative substrate, alternative primer, specific drying conditions etc.) shall be determined by supplementary tests to confirm that the requir

Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 004: High corrosion and fluid resistance with surface preparation tolerance

DS/EN 2436-002:2006 航空航天系列 色漆和清漆 耐腐蚀无铬酸盐双组份冷固化底漆 第002部分：高耐腐蚀性

This standard specifies the requirements for a two component, cold curing, chromate-free epoxy or polyurethane, high corrosion resistant primer which can be used with or without a finish for aerospace applications.The properties specified in this standard are obtained on defined aluminium alloy test pieces prepared in accordance with EN 3837 and ISO 3270. The ability of the material to be used for a specific application (e.g. alternative substrate, alternative primer, specific drying conditions etc.) shall be determined by supplementary tests to confirm that the requirements of this standard are met.

Aerospace series – Paints and varnishes – Corrosion resistant chromate-free two component cold curing primer – Part 002: High corrosion resistance