49.050 (Aerospace engines and propulsion systems) 标准查询与下载

ASTM E2104-15 先进航空和涡轮材料和部件的射线照相检验的标准实施规程

4.1 The requirements for radiographic examination in this practice are applicable to all types of metallic and nonmetallic material used in designated applications such as gas turbines and flight structures. 4.2 This practice establishes the basic parameters for the application and control of the radiographic process. This practice may be specified on an engineering drawing, specification or contract; however, it is not a detailed radiographic technique and must be supplemented. Section 7 and Test Methods E1030 and E1032 contain information to help develop detailed radiographic techniques. 1.1 This practice establishes the minimum requirements for radiographic examination of metallic and nonmetallic materials and components used in designated applications such as gas turbine engines and flight structures. 1.2 The requirements in this practice are intended to control the radiographic process to ensure the quality of radiographic images produced for use in designated applications such as gas turbine engines and flight structures; this practice is not intended to establish acceptance criteria for material or components. When examination is performed in accordance with this practice, engineering drawings, specifications or other applicable documents shall indicate the acceptance criteria. 1.3 All areas of this practice may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components

ASTM F2506-13 轻型运动航空器螺旋桨的设计和试验标准规范

1.1 This specification covers the establishment of the minimum requirements for the design, testing, and quality assurance of fixed-pitch or ground adjustable propellers for light sport aircraft. These propellers are used on light aircraft, and could be used with engines conforming to Practice F2339. 1.1.1 When applying the additions provided in Appendix X1, this specification also covers the establishment of the minimum requirements for the design, testing and quality assurance of in-flight adjustable propellers for light-sport aircraft. 1.2 This specification is intended for use by manufacturers of propellers for light sport aircraft. 1.3 This specification does not address the airframe installation requirements for propellers. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Specification for Design and Testing of Light Sport Aircraft Propellers

ASTM F2506-10e1 固定间距或地面可调轻型运动飞机的螺旋桨设计和试验的标准规范

1.1 This specification covers the establishment of the minimum requirements for the design, testing, and quality assurance of fixed-pitch or ground adjustable propellers for light sport aircraft. These propellers are used on light aircraft, and could be used with engines conforming to Practice F2339. 1.2 This specification is intended for use by manufacturers of propellers for light sport aircraft. 1.3 This specification does not address the airframe installation requirements for propellers. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers

ASTM E2104-09 高级航空涡轮机材料和件的放射性检验的标准实施规程

The requirements for radiographic examination in this practice are applicable to all types of metallic and nonmetallic material used in designated applications such as gas turbines and flight structures. This practice establishes the basic parameters for the application and control of the radiographic process. This practice may be specified on an engineering drawing, specification or contract; however, it is not a detailed radiographic technique and must be supplemented. Section 7 and Test Methods E 1030 and E 1032 contain information to help develop detailed radiographic techniques.1.1 This practice establishes the minimum requirements for radiographic examination of metallic and nonmetallic materials and components used in designated applications such as gas turbine engines and flight structures. 1.2 The requirements in this practice are intended to control the radiographic process to ensure the quality of radiographic images produced for use in designated applications such as gas turbine engines and flight structures; this practice is not intended to establish acceptance criteria for material or components. When examination is performed in accordance with this practice, engineering drawings, specifications or other applicable documents shall indicate the acceptance criteria. 1.3 All areas of this practice may be open to agreement between the cognizant engineering organization and the supplier, or specific direction from the cognizant engineering organization. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components

ASTM F2506-07 固定螺距或地面可调整轻型运动飞机螺旋桨设计和测试用标准规范

1.1 This specification covers the establishment of the minimum requirements for the design, testing, and quality assurance of fixed-pitch or ground adjustable propellers for light sport aircraft. These propellers are used on light aircraft, and could be used with engines conforming to Practice F 2339.1.2 This specification is intended for use by manufacturers of propellers for light sport aircraft.1.3 This specification does not address the airframe installation requirements for propellers.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and to determine the applicability of regulatory limitations prior to use.

Standard Specification for Design and Testing of Fixed-Pitch or Ground Adjustable Light Sport Aircraft Propellers

ASTM F2538-07 轻型运动飞机用往复式压缩点火发动机的设计和制造的标准实施规程

1.1 This practice covers minimum requirements for the design and manufacture of reciprocating compression ignition engines for light sport aircraft, day Visual Flight Rules (VFR) use.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft

ASTM F2538-07a 轻型运动飞机用往复式压缩点火发动机的设计和制造的标准实施规程

This practice provides designers and manufacturers of engines for light sport aircraft design references and criteria to use in designing and manufacturing engines. Declaration of compliance is based on testing and documentation during the design and testing or flight-testing of the engine type by the manufacturer or under the manufacturerrsquo;guidance.1.1 This practice covers minimum requirements for the design and manufacture of reciprocating compression ignition engines for light sport aircraft, Visual Flight Rules (VFR) use.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft