49.060 航空航天用电气设备和系统 标准查询与下载

IEC TS 62686-1:2020 航空电子设备的过程管理.航空航天、国防和高性能（ADHP）应用的电子元件.第1部分:高可靠性集成电路和分立半导体的一般要求

Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and disc

IEC TS 62686-1:2020 RLV 航空电子设备的过程管理.航空航天、国防和高性能（ADHP）应用的电子元件.第1部分:高可靠性集成电路和分立半导体的一般要求

Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and disc

BS EN 3155-018:2020 航空航天系列 连接元件中使用的电触点 触点 电气 公头 A 型 压接 S 级 产品标准

What is BS EN 3155 ‑ 018 about?    BS EN 3155 discusses standards for electrical contacts for aerospace series.   BS EN 3155 ‑ 018 focuses on male electrical contacts.   BS EN 3155 ‑ 018 is part-18 of a series of documents that specifies the required characteristics and tests an...

Aerospace series. Electrical contacts used in elements of connection - Contacts, electrical, male, type A, crimp, class S. Product standard

ASTM F3425-20 飞机电子设备安装技术员认证的标准指南

1.1 The purpose of this guide is to address the fundamental subject knowledge activities and functions for avionics professionals to be titled Aircraft Electronics Installation Technicians (AEIT). 1.2 This guide is the basis for the Aircraft Electronics Installation Technician (AEIT) certification, an endorsement to the Aircraft Electronics Technician (AET) certification. Candidates must be a certified AET to take the certification exam associated with this guide. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Guide for Aircraft Electronics Installation Technician Certification

BS EN 3155-016:2019 航空航天系列 连接元件中使用的电触点 触点 电气 公头 A 型 压接 S 级 产品标准

What is BS EN 3155 ‑ 016 - Male electrical contacts about ?    BS EN 3155 ‑ 016 is an international standard for aerospace series that specifies the test methods and characteristics of male electrical contacts which is useful in producing aerospace products.   BS EN 3155 ‑ 016 specifies the required characteristics, tests, and tooling applicable to male electrical contacts, type A, crimp, class S, used in elements of connection.

Aerospace series. Electrical contacts used in elements of connection - Contacts, electrical, male, type A, crimp, class S. Product standard

BS EN 3155-077:2019 航空航天系列 连接元件中使用的电触点 触点 电气 母头 A 型 压接 R 级 产品标准

What is BS EN 3155 ‑ 077 - Female electrical contacts about ? BS EN 3155 ‑ 077 is an international standard for aerospace series that specifies the test methods and characteristics of female electrical contacts which is useful in producing aerospace products.   BS EN 3155 ‑ 077 specifies the required characteristics, tests, and tooling applicable to female electrical contacts size 22, 20, 16, 12, 8, and 5, type A, crimp, class R, used in elements of connection. BS EN 3155 ‑ 077 is to be used with BS EN 3155 ‑ 001.   Who is BS EN 3155 ‑ 077 - Female electrical contacts for ?

Aerospace series. Electrical contacts used in elements of connection - Contacts, electrical, female, type A, crimp, class R. Product standard

KS W 5111-2019 隔离变压器

Isolated transformers

BS EN 3155-076:2019 航空航天系列 连接元件中使用的电触点 触点 电气 公头 A 型 压接 R 级 产品标准

What is BS EN 3155 ‑ 076 - Male electrical contacts about ?    BS EN 3155 ‑ 076 is an international standard for aerospace series that specifies the test methods and characteristics of male electrical contacts which is useful in producing aerospace products.   BS EN 3155-076 specifies the required characteristics, tests, and tooling applicable to male electrical contacts size 22, 20, 16, 12, 8, and 5, type A, crimp, class R, used in elements of connection. BS EN 3155-076 is to be used with

Aerospace series. Electrical contacts used in elements of connection - Contacts, electrical, male, type A, crimp, class R. Product standard

BS EN 2997-011:2019 航空航天系列 连接器 电气 圆形 通过螺纹环耦合 耐火或非耐火 工作温度 -65 °C 至 175 °C 连续 200 °C 连续 260 °C 峰值 虚拟插座 产品标准

What is BS EN 2997‑011- Product standard for dummy receptacle about?    BS EN 2997 is a European standard on aerospace series that discusses c onnectors, electrical, circular, coupled by a threaded ring, fire-resistant or Non-fire-resistant, operating temperatures –65 °C to 175 °C continuous, 200 °C continuous, 260 °C peaks. BS EN 2997‑011 provides the product standard dummy receptacle to enhance their performance.   BS EN 2997‑011 is the eleventh part of a multi-part series that specifies the characteristics of dummy receptacles in the family of circular electrical connectors coupled by a threaded ring.    Who is BS EN 2997‑0...

Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire resistant or non fire resistant, operating temperatures -65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak - Dummy receptacle. Product standard

BS EN 3155-045:2019 航空航天系列 连接元件中使用的电触点 触点 电气 母头 A 型 双压接 T 级 产品标准

What is BS EN 3155 ‑ 045 - Electrical contacts used in elements of connection about ?    BS EN 3155 ‑ 045 specifies the required characteristics, tests, and tooling applicable to female electrical contacts 045, type A, double crimping, class T, used in elements of connection according to EN 3155-002 .   BS EN 3155 ‑ 045  shall be used together with EN 3155-001

Aerospace series. Electrical contacts used in elements of connection - Contacts, electrical, female, type A, double crimping, class T. Product standard

KS W 5091-2019 恒流调节器

Constant current regulators

BS EN 3660-001:2019 航空航天系列 用于圆形和矩形电气和光学连接器的电缆出口附件 技术规范

What is BS EN 3660-001- Cable outlet accessories about ?    BS EN 3660-001 is an international standard that specifies cable outlet accessories for use with circular and rectangular electrical and optical connectors on aerospace equipment. These may be sealed or unsealed and include accessories suitable for the suppression of radiofrequency and electromagnetic inference.   BS EN 3660-001 is used in conjunction with circular and rectangular electrical and optical connectors for varying temperature ranges, environmental conditions, fire-resistant and non-fire-resistant applications as designated in the product standards.  

Aerospace series. Cable outlet accessories for circular and rectangular electrical and optical connectors - Technical specification

ASTM F2339-19a 轻型运动飞机用往复式火花点火发动机的设计和制造

1.1 This practice covers minimum requirements for the design and manufacture of reciprocating spark ignition engines for light sport aircraft, VFR use. 1.2 The values stated in inch-pound units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft

ASTM F319-19 航空航天透明加热元件缺陷的偏振光检测的标准实施规程

1.1 This practice covers a standard procedure for detecting flaws in the conductive coating (heater element) by the observation of polarized light patterns. 1.2 This practice applies to coatings on surfaces of monolithic transparencies as well as to coatings imbedded in laminated structures. 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific precautionary statements, see Section 6. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements

BS EN 4708-107:2019 航空航天系列 用于粘合、绝缘和识别的热收缩套管 聚四氟乙烯 (PTFE) 工作温度 65°C 至 260°C 产品标准

What is BS EN 4708-107 - Polytetrafluoroethylene sleeving about ?    BS EN 4708-107 is an international standard for aerospace series that provides guidance on the polytetrafluoroethylene sleeving.   BS EN 4708-107 specifies the required characteristics for a heat-shrinkable, polytetrafluoroethylene sleeving for use in aircraft electrical systems at operating temperatures between - 65 °C to 260 °C. This sleeving is translucent. It is semi-rigid, and suitable for use where resistance to chemicals and high-temperature performance is required. It is flame-resistant and available in low and high shrink ratios.     Who is BS EN 4708-107 - Polytetrafluoroethylene sleeving for ? BS EN 4708-107

Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification - Polytetrafluoroethylene (PTFE). Operating temperatures. 65 °C to 260 °C. Product standard

BS EN 4612-012:2019 航空航天系列 通用电气电缆 单芯和多芯组件 XETFE 家族 护套或屏蔽加护套 镀镍铜 工作温度为 65 °C 至 150 °C 双挤压墙用于开放式…

What is BS EN 4612-012 - Nickel-plated copper cables about ?    BS EN 4612-012 is an international standard on nickel-plated copper cables with jackets and screens.   BS EN 4612-012 specifies the characteristics of UV laser printable jacket, nickel-plated copper conductor electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene copolymer (XLETFE) family for use in the onboard electrical systems of aircraft operating at temperatures between – 65 °C and 150 °C, operating at voltages not exceeding 600 V. this insulation system has been used in aerospace applications using 115 V (phase-to-neutral) 400 Hz ac and 28 Vdc.   These cables are suitable for airframe use without additional protection.

Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed - Nickel plated copper. Operating temperatures, between - 65 °C and 150 °C. Dual extruded wall for open…

BS EN 4604-003:2019 航空航天系列 电气电缆 用于信号传输 同轴电缆 50 欧姆 200 °C WZ 型 产品标准

What is BS EN 4604 ‑ 003 - Coaxial cables for signal transmission about? BS EN 4604 ‑ 003 discusses coaxial cables used in aircraft electrical systems. BS EN 4604 ‑ 003 specifies the characteristics of a UV laser printable coaxial cable, 50, type WZ, for use in aircraft electrical systems at operating temperatures between 65 °C and 200 °C and especially for high frequency up to 3 GHz. Coaxial cables enable conveying data, video, and voice communication across the world. It has also been used extensively within the aircraft industry. It gives the advantages of reliable and accurate communication. Who is BS EN 4604 ‑ 003 - Coaxial cables for signal transmission for ? B S EN 4604 ‑ 003 on coaxial cables for signal transmission is useful for: Coaxial cable manufacturers and suppliers Coaxial cable installers Aerospace industry ...

Aerospace series. Cable, electrical, for signal transmission - Cable, coaxial, 50 ohms, 200 °C, type WZ. Product standard

BS EN 4708-108:2019 航空航天系列 热收缩套管 用于捆绑、绝缘和识别 火灾危险有限的套管 工作温度 65°C 至 150°C 产品标准

What is BS EN 4708-108 - Fire hazard sleeving about ?    BS EN 4708-108 is an international standard for aerospace series that guides on the fire hazard sleeving.   BS EN 4708-108 specifies the required characteristics for four types of heat-shrinkable limited fire hazard sleeving for use in aircraft electrical systems at operating temperatures between 65 °C and 150 °C.   This sleeving is flexible, flame retarded, and emits minimum smoke, gases, and corrosive by-products when exposed to fire. It is available with various wall thicknesses and, also in a higher shrink ratio according to the application and degree of mechanical protection required. It is suitable for use (e.g., as cable protection) in areas where smoke, gases, or corrosive by-products would constitute a particular hazard.   Type A: Medium wall, shrink ratio 2:1 and is normally supplied with internal diameters up to 30 mm.

Aerospace series. Sleeving, heat-shrinkable, for binding, insulation and identification - Limited fire hazard sleeving. Operating temperatures. 65 °C to 150 °C. Product standard

BS EN 4165-022:2019 航空航天系列 连接器 电气的 矩形的 模块化的 工作温度 175 °C 连续 用于拆卸模块的插入/拔出工具 产品标准

What is BS EN 4165-022 - Insertion/extraction tool about ? BS EN 4165-022 is an international standard that defines insertion/extraction tool for removal of modules used in the family of rectangular electrical connectors.   Insertion, Extraction tool is a device used to place or remove a contact within a housing of a connector.    BS EN 4165-022 also covers the required characteristics, insertion/extraction tool, designation, identification and markings, and technical specifications about insertion and extraction tool for removal of modules.   Who is BS EN 4165-022 - Insertion/extraction tool for ? BS EN 4165-022 for insertion/extraction tool applicable for:

Aerospace series. Connectors, electrical, rectangular, modular. Operating temperature 175 °C continuous - Insertion/extraction tool for removal of modules. Product standard

BS EN 4612-011:2019 航空航天系列 通用电气电缆 单芯和多芯组件 XETFE 家族 护套或屏蔽加护套 镀镍铜 工作温度为 65 °C 至 150 °C 双挤压墙用于开放式…

What is BS EN 4612-011 - Nickel-plated copper cables about ?    BS EN 4612-011 is an international standard on nickel-plated copper cables.   BS EN 4612-011 specifies the characteristics of UV laser printable jacket, nickel-plated copper conductor electrical cables Crosslinked Ethylene Tetra Fluoro Ethylene copolymer (XLETFE) family for use in the onboard electrical systems of aircraft operating at temperatures between – 65 °C and 150 °C, operating at voltages not exceeding 600 V. this insulation system has been used in aerospace applications using 115 V (phase-to-neutral) 400 Hz ac and 28 Vdc.   These cables are suitable for airframe use without additional protection.   Nickel-plating on copper provides thermal stability and flame resistance to cable and also increases its durability.  ...

Aerospace series. Cables, electrical, for general purpose, single and multicore assembly. XLETFE Family. Jacketed or screened and jacketed - Nickel plated copper. Operating temperatures, between - 65 °C and 150 °C. Dual extruded wall for open…