共找到 2370 条与 航空航天用流体系统和零部件 相关的标准,共 158 页
This Aerospace Standard (AS) defines the requirements for a lightweight polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assembly suitable for use in high temperature, 400 °F, high pressure, 3000 psi, aircraft hydraulic systems, also for use in pneumatic systems which allow some gaseous diffusion through the PTFE wall.
Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, 3000 psi, 400°F, Lightweight, Hydraulic and Pneumatic
This document describes: a. the preparatory steps to test experimental Type II, III and IV fluids according to AMS1428; b. the recommendations for the preparation of samples for endurance time testing according to ARP5485; c. a short description of recommended field spray test; d. the protocol to generate draft holdover time guidelines from endurance time data as obtained from ARP5485; e. the protocol for inclusion of Type II, III, and IV fluids on the FAA and Transport Canada lists of fluids and the protocol for updating the lists of fluids; f. the role of the SAE G-12 Aircraft Deicing Fluids Subcommittee; g. the role of the SAE G-12 Holdover Time Committe
Process to Obtain Holdover Times for Aircraft Deicing/Anti-Icing Fluids, SAE AMS 1428 Type II,III and IV
Fitting Assembly, Elbow 45°, Reducer and Nonreducer, Internal Flare to Flared Tube
This SAE Aerospace Standard (AS) defines the requirements for a convoluted polytetrafluoroethylene (PTFE) lined, metallic reinforced, hose assembly suitable for use in aircraft fluid systems at temperatures of -65 to 400 degrees F and at operating pressures per Table 1.
Hose Assemblies, Convoluted Polytetrafluoroethylene Metallic Reinforced, High Temperature, Medium Pressure, Aircraft
Fitting, Elbow 45 Degrees, Standard and Reducer, 37 Degrees Spherical, Flared
This supplement forms a part of the Aerospace Standard AS 1946, Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, up to 1500 psi and 450 °F, Hydraulic and Pneumatic, and shall be used to identify hose assembly standards citing this procurement specification.
Hose Assembly, Polytetrafluoroethylene, Metallic Reinforced, Up to 1500 psi and 450°F, Hydraulic and Pneumatic (Supplement 1)
This supplement forms a part of the Aerospace Standard AS5951, Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35,000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems, and shall be used to identify hose assembly standards citing this procurement specification.
Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 5080 psi (35,000 kPa), 275 °F (135 °C), Aircraft Hydraulic Systems (Supplement 1)
This supplement forms a part of the Aerospace Standard AS 5420, Hose Assembly, Heated 125 psig, Lined Silicone Potable Water, Procurement Specification, and shall be used to identify hose assembly standards citing this procurement specification.
Hose Assembly, Heated 125 psig, Lined Silicone Potable Water, Procurement Specification (Supplement 1)
This supplement forms a part of the Aerospace Standard AS4468, Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification. It shall be used to identify hose assembly standards that are governed by this procurement specification.
Hose Assembly, 125 psi, Lined Silicone, Potable Water, Procurement Specification (Supplement 1)
This supplement forms a part of the Aerospace Standard AS4623, Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems, and shall be used to identify hose assembly standards citing this procurement specification.
Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000 psi, 275 °F, Heavy Duty, Aircraft Hydraulic Systems (Supplement 1)
This supplement forms a part of the Aerospace Standard AS5960, Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35,000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems, and shall be used to identify hose assembly standards citing this procurement specification.
Hose Assembly, Polytetrafluoroethylene, Metallic Braid Reinforced, 5080 psi (35,000 kPa), 400 °F (204 °C), Aircraft Hydraulic Systems (Supplement 1)
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist. This Aerospace Information Report (AIR) describes a mathematical model that can be used to analyze particle count data. Particle counts that fit the model can be graphically displayed, converted from one counting size-frequency range to another, and extrapolated to estimate counts beyond the measured range. Derivation, applications and calculations are described. Cumulative particle counts larger than stated size-range are fitted against a modified log-normal distribution function by plotting on special log-log graph paper. Many real particle distributions approximate a straight line, showing good fit for this log-normal model. The resultant plot provides a basis for further analysis, including size-range conversion and extrapolation.
Aerospace - Particle Count Data Conversion and Extrapolation
Fitting, Cross, Standard and Reducer, Flareless, Precision Type
Fitting, Elbow 90 Degree, Standard and Reducer, Flareless, Precision type
This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.
Tube - Pitot, Electrically Heated
Fitting, Tee, Reducer, Flareless and Short Flareless
Fitting, Tee, Standard and Reducer, Bulkhead on Run, Flareless, Precision Type
Fitting, Elbow, 90 degrees, Short Flareless
This documents defines the requirements for weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3Al-2.5V titanium , 21Cr-6Ni-9Mn CRES and nickel alloy tubing. Fitting standards covered by this specification include non-separable welded elbow, tee, and reducer fittings, and reconnectable 24 degree cone fittings such as sleeves and unions.
Fittings, Welded, Hydraulic, Titanium, Corrosion Resistant Steel and Nickel, 3000 psi Hydraulic
Aerospace series - Pipelines for liquids and gases - Definitions
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号