49.090 机上设备和仪器 标准查询与下载

SAE AS5653-2008 MIL-STD-1760型用高速网络

SAE AS 5653 may be applied to Air Vehicles and Stores implementing MIL-STD-1760 Interface Standard for Aircraft/Store Electrical Interconnection System. This standard defines the characteristics and requirements for a high speed data bus incorporated within a MIL-STD-1760 interface to provide improved transfer capabilities and an alternative command and control path. The high speed data bus is based on Fibre Channel standards. This document (SAE AS 5653) is a profile of Fibre Channel standards. This standard contains the minimum interoperability requirements necessary to define a standardized transport mechanism for video, audio, data files, and command and control transfers. The addition of the high speed data bus to the interface currently defined in MIL-STD-1760D requires changes to be incorporated into that standard (MIL-STD-1760), as defined in Appendix A of this standard (SAE AS 5653). This standard assumes a knowledge of Fibre Cannel communication concepts reference should be made to the Fibre Channel standards where appropriate

High Speed Network for MIL-STD-1760

ANSI/IEEE 1431/Cor1:2008 哥氏振动陀螺仪用标准规范格式指南和试验程序.技术勘误1:图1.陀螺轴线和失调角

Standard Specification Format Guide and Test Procedure for Coriolis Vibratory Gyros - Corrigendum 1: Figure 1 - Gyro Axes and Misalignment Angles

IEEE 1431/COR 1-2008 科里奥利振动陀螺用规范格式指南和试验程序.技术勘误1:图1.陀螺仪的轴和偏离角

Specification format guide and test procedure for coriolis vibratory gyros - Corrigendum 1: Figure 1 - Gyro axes and misalignment angles

EN 4639-001:2007 航空航天系列.带可移除调整衬套固定器、1.25直径套圈、多触点、矩形模块光学连接器.第001部分:技术规范

This standard specifies the general characteristics, the conditions for qualification, acceptance and quality assurance, as well as the test programs and groups for rectangular multipin fibre optic connectors.

Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification

STANAG 7147-2007 夜视仪（NVD）训练的航空医学方面

AEROMEDICAL ASPECTS OF NIGHT VISION DEVICE (NVD) TRAINING

KS W ISO 10201-2007(2012) 航空航天电子仪器和系统标准

Aerospace－Standards for electronic instruments and systems

KS W ISO 10201:2007 航空航天.电子仪器和设备的标准

이 규격은 항공 우주용 전자 계기와 시스템에 관련된 규격의 일람표를 나타내는 것이다.

Aerospace-Standards for electronic instruments and systems

SAE AIR1539B-2007 环境控制系统污染

This publication will be limited to a discussion of liquid and particulate contaminants which enter the aircraft through the environmental control system (ECS). Gaseous contaminants such as ozone, fuel vapors, sulphates, etc., are not covered in this AIR. It will cover all contamination sources which interface with ECS, and the effects of this contamination on equipment. Methods of control will be limited to the equipment and interfacing ducting which normally falls within the responsibility of the ECS designer. The purpose of this Aerospace Information Report (AIR) is to categorize sources of Environmental Control System contaminants, define the effects of these contaminants on occupants and equipment, and outline design features that can be used to control contamination in aircraft systems.

(R) Environmental Control System Contamination

BS EN 3375-001:2007 航空航天系列.数字数据传送用电缆.技术规范

This standard specifies the required characteristics, test methods, qualification and acceptance conditions of signal data transmission electrical cables.

Aerospace series - Cable, electrical, for digital data transmission - Technical specification

EN 3745-601:2007 航空航天系列.飞行器用光纤和电缆的试验方法.第601部分:烟浓度

This test method is intended for use in determiningThe concentration of specific gas components of smoke released by cable insulation materials. It shall be used together with EN 3745-100.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 601: Smoke density

EN 3745-303:2007 航空航天系列.飞行器用光纤和电缆的试验方法.第303部分:带宽

This standard specifies methods of measuring the bandwidth of optical cable. It shall be used together with EN 3745-100.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 303: Bandwidth

EN 3745-505:2007 航空航天系列.飞行器用光纤和电缆的试验方法.第505部分:电缆拉伸强度

This standard specifies a method for measuringThe tensile properties of a fibre optic cable. It shall be used together with EN 3745-100.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 505: Cable tensile strength

EN 3745-411:2007 航空航天系列.飞行器用光纤和电缆的试验方法.第411部分:对流体的抵抗

This standard specifies methods of measuringThe fluid resistance of a finished cable. It shall be used together with EN 3745-100, EN 3909 and TR 4542.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 411: Resistance to fluids

KS W ISO 268:2007 航空器.机械的和电动机械的指示器.通用要求

이 규격은 항공기에서 사용하는 기계식 및 전자기계식 지시계에 적용되는 일반 요구사항들을 규

Aircraft-Mechanical and electromechanical indicators-General requirements

EN 3375-001:2007 航空航天系列.数字数据传输用电缆.第001部分:技术规范

This standard specifies the required characteristics, test methods, qualification and acceptance conditions of signal data transmission electrical cables.

Aerospace series - Cable, electrical, for digital data transmission - Part 001: Technical specification

CEA-2017-2007 可携带媒体播放器的共同互联

This standard defines electrical and mechanical properties for a connector that will pass audio, video and associated metadata signals, control signals, and power between portable electronic devices and in-home and in-vehicle audio/video systems.

Common Interconnection for Portable Media Players

SAE AS94900-2007 航空航天飞行控制系统设计、安装和军用飞行器试飞行的通用规范

This specification establishes general performance, design, test, development and quality assurance requirements for the Flight Control Systems of military piloted aircraft. Flight Control Systems (FCS) include all components used to transmit flight control commands from the pilot or other sources to appropriate force and moment producers. Flight control commands normally result in control of aircraft altitude, airspeed, flight path, attitude, aerodynamic or geometric configuration, ride quality, and structural modes. Among components included are the pilot's controls, dedicated displays and logic switching, system inertial and air data sensors, signal computation, test devices, mechanical transmission devices, actuators, power sources, and signal transmission lines dedicated to flight control. Excluded are aerodynamic surfaces, engines and engine control systems, rotorcraft rotors, fire control devices, crew displays and electronics not dedicated to flight control. In the event of conflict between this specification and other referenced documents, this specification shall govern. The detail requirements for a particular system shall be specified in the FCS Specification, 4.6.2, the Aircraft Detail Specification, the contract, or purchase order for that system. Most of the technical concepts and approaches covered by the document represent industry "best practice". They are based on sound and proven engineering practices and have demonstrated successful production experience. Others require specific approval from the procuring activity before use. This requirement for approval is not intended to prohibit their use; but rather to ensure that the prime contractor has fully investigated their capability to perform reliably and to be sufficiently durable under the required conditions and that the prime contractor can present substantiating evidence for approval before the design is committed to.

Aerospace - Flight Control Systems - Design, Installation and Test of Piloted Military Aircraft, General Specification For

CEA-CEB5-B-2007 数字电视接收机监视器模式能力的推荐的做法

CEA-CEB5-B provides recommendations to digital television (DTV) designers and manufacturers concerning a “monitor” mode capability. CEA-762-A provides minimum specifications for a DTV remodulator.

Recommended Practice for DTV Receiver 揗onitor?Mode Capability

CEA-761-B-2007 数字电视二次调制器规格与增强的OSD能力

CEA-761-B defines minimum specifications for a one-way data path utilizing an 8 VSB trellis or a 16 VSB remodulator in compliance with ATSC A/53E Annex D. CEA-761-B references CEA-799-A for on-screen display (OSD) capabilities. The 8 VSB portion of CEA-761-B applies to devices capable of receiving 8 VSB signals and supporting “monitor mode.” The 16 VSB portion of CEA-761-B applies to devices capable of receiving 16 VSB signals and supporting “monitor mode.” For information concerning monitor mode recommendations, refer to CEA-CEB5-B.

DTV Remodulator Specification With Enhanced OSD Capability

CEA-608-D-2007 线路21的数据服务

This section describes the signal format used to encode data for transmission on line 21 of the television picture. It contains important information related to both encoders and decoders. This information is provided to ensure compatibility between encoders and decoders.

Line 21 Data Services