49.090 机上设备和仪器 标准查询与下载

CEA-931-C-2007 通过家庭网络进行遥控

This standard defines characteristics for spoken audio content and players to improve the listening experience when used together. This standard is not limited to any particular format for publishing content.

Remote Control Command Pass-through for Home Networking

EN 3733-007:2007 航空航天系列.连续工作温度低于150℃自锁紧环连接的单路圆形光学连接器.第007部分:EN 4532(200mu/280mu纤维)的套环(光学连接器).产品标准

This standard specifies the characteristics of ferrules (optical contacts) for aerospace series single core optical fibre as incorporated in EN 4532, operating temperature up to 150 ℃. Connector interface dimensions, table of tests and qualification approval requirements, are contained inThe Technical Specification EN 3733-001. EN 3733-002, List of product standards, includesThe listings of product types, codification and applicable combinations of product types.

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 007: Ferrule (optical contact) for EN 4532 (200 µm/280 µm fibre) - Product standard

EN 3745-705:2007 航空航天系列.飞行器用光纤和电缆的试验方法.第705部分:反差测量

This standard specifies the process to be applied for measuring different colour densities of cable identification markings. It is designed to define a reproducible process of contrast value determination.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Part 705: Contrast measurement

BS 5N 100-5:2006 航空器供氧系统和设备.包括搬运、储藏和补给与氧气相关的着火和爆炸危害指南

This part of BS N 100 provides guidance on the dangers, and avoidance of, fire and explosion hazards associated with oxygen. Annex A provides additional guidance and recommendations on liquid and gaseous oxygen handling, storage and aircraft replenishment.

Aircraft oxygen systems and equipment - Guide to fire and explosion hazards associated with oxygen, including handling, storage and replenishment

SAE AS50881C-2006 宇航飞行器配线

This specification covers all aspects from the selection through installation of wiring and wiring devices and optical cabling and termination devices used in aerospace vehicles. Aerospace vehicles include manned and unmanned airplanes, helicopters, lighter-than- air vehicles, missiles and external pods.

Wiring Aerospace Vehicle

SAE ARP5674-2006 安装激光器飞机投影进入航道空间安全性考虑

This document is intended to be used for laser systems mounted on aircraft and intended for use in the navigable airspace. This does not include lasers onboard aircraft where the beam is contained within an enclosure so that the beam cannot enter into airspace, nor does it include lasers from satellites and spacecraft in outer space. It may be used in conjunction with: AS4970, ARP5535, ARP5572, ARP5293, and the ANSI Z136 laser safety standards. The purpose of this document is to provide guidance to regulatory and approving authorities on issues specific to the use of aircraft-mounted laser systems designed for use into navigable airspace.

Safety Considerations for Aircraft-Mounted Lasers Projected Into the Navigable Airspace

HJB 368-2006 舰空导弹武器系统红外跟踪器通用规范

General specification for infrared tracker of ship-to-air missile weapon system

EN 3733-008:2006 航空航天系列.连续工作温度150℃自锁紧环连接的单路圆形光连接器.第008部分:EN4532(200mu/280mu纤维)的电缆用插头组件.产品标准

This standard specifies the characteristics of plug sub-assemblies for single channel fibre optic plug connectors for aerospace series single core optical cable in accordance with EN 4532, operating temperature up to 150 °C.Connector interface dimensions, table of tests and qualification approval requirements, are contained in the Technical Specification EN 3733-001. EN 3733-002, List of product standards, includes the listings of product types, codification and applicable combinations of product types.

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 008: Plug sub-assembly for cable to EN 4532 (200 µm/280 µm fibre) - Product standard

CEA-2020-2006 其他VBI波形

This standard, CEA-2020, specifies four Vertical Blanking Interval (VBI) waveforms in commercial use. The electrical properties of the waveforms are covered, but the meaning of the payload data is not.

Other VBI Waveforms

CEA-2005-2006 连接以太网和1394装置的AV适配器

This standard defines a method for measuring the audio performance of powered subwoofers.

AV Adapter to Connect Ethernet and 1394 Devices

EN 3733-009:2006 航空航天系列.连续工作温度150℃自锁紧环连接的单路圆形光连接器.第008部分:EN4532(200mu/280mu纤维)的电缆用插孔组件.产品标准

This standard specifies the characteristics of receptacle sub-assemblies for single channel fibre optic receptacle connectors for aerospace series single core optical cable in accordance with EN 4532, operating temperature up to 150 °C.Connector interface dimensions, table of tests and qualification approval requirements, are contained in the Technical Specification EN 3733-001. EN 3733-002, List of product standards, includes the listings of product types, codification and applicable combinations of product types.

Aerospace series - Connector, optical, circular, single channel, coupled by self-locking ring, operating temperature up to 150 °C continuous - Part 009: Receptacle sub-assembly for cable to EN 4532 (200 µm/280 µm fibre) - Product standard

EN 4533-002:2006 航空航天系列.纤维光学系统.手册.第002部分:试验和测量

Insertion loss is the most frequent measurement performed on a fibre optic link. The avionic system designer will want to know or predict the insertion loss of a link to determine its performance. Aircraft manufacturers will want to measure the insertion loss of harness components during assembly and before it is delivered to the customer to highlight faults and to provide a record of the performance of the harness at the beginning of its lifetime (footprinting). The insertion loss will be measured at intervals during the lifetime of the aircraft to discover or identify faults and any gradual degradation in performance of the harness.There is, however, one

Aerospace series - Fibre optic systems - Handbook - Part 002: Test and measurement

EN 4533-004:2006 航空航天系列.纤维光学系统.手册.第004部分:修理,维护和检测

The original task headings in the Fibre Optic Harness Study were ‘Inspection and Fault Analysis’ and ‘Repair and Maintenance’. However, to create a more coherent and readable handbook these have been re-arranged in this part of EN 4533 to make two new topic headings – ‘Fault analysis and repair’ and ‘Scheduled maintenance and inspection’. The first deals with what to do when something goes wrong – how to go from a fault notification to locating the fault, and finally, repairing it. The second covers the recommended procedures for upkeep and maintaining harness health over the lifetime of its installation. It is beneficial to read both sections together as m

Aerospace series - Fibre optic systems - Handbook - Part 004: Repair, maintenance and inspection

CEA-CEB16-2006 积极格式描述(AFD)和条码的数据推荐作法(含有色)

This bulletin, CEA-CEB16, provides guidance for the development and implementation of consumer devices that process information related to aspect ratio signaling, Active Format Description (AFD) and bar data. Such devices may respond to this signaling by creating an optimum (or more desirable) display, by passing this signaling through to an analog or digital output, or in preparation of a digital recording. CEA-CEB16 reviews the standardized methods for representing AFD, aspect ratio information, and bar data on various analog and digital Standard Definition (SD) and High Definition (HD) interfaces. For each of various transmitted display formats, CEA-CEB16 provides recommendations for output signaling and display appearance, taking into account possible decoder capabilities, scaling options and user preferences regarding display format.

Active Format Description (AFD)& Bar Data Recommended Practice (Contains Color)

CEA-2031-2006 高保真扬声器系统的测试和测量方法

CEA-2031 defines test procedures for rating the performance and physical size of mobile loudspeakers,and requirements for reporting these characteristics. CEA-2031, when used in conjunction with CEA-2006-A, Testing & Measurement Methods for Mobile Audio Amplifiers, enables consumers to select mobile loudspeakers with power handling capabilities that are appropriate for the power output characteristics of their mobile amplifiers.

Testing and Measurement Methods for Mobile Loudspeaker Systems

CEA-2027-A-2006 家庭网络采用基于网络的协议(包含颜色)用户接口规范

This CEA standard includes mechanisms to allow audio/video (A/V) devices connected via a home network to present a status and control user interface (UI) on a network-attached renderer.

A User Interface Specification for Home Networks Using Web-based Protocols (Contains Color)

CEA-2012-A-2006 零部件产品的MOST网络网关(彩色)

The MOST Specifications provide a comprehensive structure on which to build automotive networks. The MOST Specifications were designed for the automotive industry by carmakers and suppliers and thus take into account the special environmental and performance requirements needed in automobiles. The MOST Specifications are very broad. They are organized as shown in Figure 1.

MOST Network Gateway for Aftermarket Products (Contains Color)

CEA-861-D-2006 无压缩高速数码接口DTV规范

CEA-861-D establishes protocols, requirements, and recommendations for the utilization of uncompressed digital interfaces by consumer electronics devices such as digital televisions (DTVs),digital cable, satellite or terrestrial set-top boxes (STBs), and related peripheral devices including, but not limited to DVD players/recorders, and other related source or sink devices. As Digital Visual Interface (DVI) 1.0 [3], Open LVDS Display Interface (LDI) [7], and High-Definition Multimedia Interface (HDMI) [29] specifications. Protocols, requirements, and recommendations that are defined include video formats and waveforms; colorimetry and quantization; transport of compressed and uncompressed, as well as Linear Pulse Code Modulation (LPCM), audio; carriage of auxiliary data; and implementations of the Video Electronics Standards Association (VESA) Enhanced Extended Display Identification Data Standard (E-EDID) [9], which is used by sink devices to declare display capabilities and characteristics.

A DTV Profile for Uncompressed High Speed Digital Interfaces

CEA-851-A-2006 家庭通用网络

This standard was developed under the auspices of the R7 Home Network Committee.

Versatile Home Network

CEA-799-A-2006 屏幕视控系统规范

This standard, CEA-799-A, specifies syntax and semantics for bitmapped graphics data typically used for on-screen display (OSD). CEA-799-A is applicable whenever it is necessary to specify a standard method for delivery of bitmapped graphics data. The pixel formats include optional alpha-blend and transparency attributes to support composition of graphics over analog or digitally decoded video within the display.

On-Screen Display Specifications