49.090 机上设备和仪器 标准查询与下载

BS EN 3745-507:2002 航空航天系列.飞行器用光纤和光缆.试验方法.切割

This standard specifies a method of testing the resistance of an optical cable to the penetration of a cutting surface, for aerospace applications.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Cut-through

BS EN 3745-510:2002 航空航天系列.飞行器用光纤和光缆.试验方法.弯曲试验

This standard specifies a method of checking the ability of an optical cable to bending test on a mandrel for aerospace application.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Bending test

BS EN 3745-302:2002 航空航天系列.飞行器用光纤和光缆.试验方法.数字孔径

This standard specifies a method of determining the effective numerical aperture of an optical cable or fibre used in aerospace applications.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Numerical aperture

BS EN 3745-504:2002 航空航天系列.飞行器用光纤和光缆.试验方法.微弯曲试验

To be read in conjunction with EN 3745-100

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Micro bending test

BS EN 3745-305:2002 航空航天系列.飞行器用光纤和光缆.试验方法.周围光耦合的消除

This standard specifies a method of measuring the immunity of optical fibre or cable to the coupling of power coming from an external light source.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Immunity to ambient light coupling

BS EN 3745-508:2002 航空航天系列.飞行器用光纤和光缆.试验方法.扭转力

This standard specifies a method of checking the resistance to damage under torsion of an optical cable for aerospace applications.

Aerospace series - Fibres and cables, optical, aircraft use - Test methods - Torsion

EN 2591-613:2002 航空航天系列.光电连接元件的试验方法.第613部分:光学元件.冲击试验

This standard specifies a method of determining the impact resistance on a hard surface of optical connection elements (including permanent connections) and fibre optic couplers.It shall be used together with EN 2591-100.

Aerospace series - Elements of electrical and optical connection; Test methods - Part 613: Optical elements; Impact test

SAE ARP1782A-2002 机载直视型CRT显示器的广度和灰度测量程序

This ARP describes methods for measuring the visual performance of direct view cathode ray tube displays used in aircraft flight decks and cockpits. Procedures may vary depending upon the type of display (for example, monochrome, color shadowmask, beam index, etc.), but all types are considered. This ARP describes the methods to be used in measuring those performance characteristics important for color and luminance use in direct view airborne electronic display systems.

Photometric and Colorimetric Measurement Procedures for Airborne Direct View CRT Displays

EN 2591-606:2002 航空航天系列.电气和光学连接元件的试验方法.第606部分:光学件.串音

This standard specifies a method of measuring the forward and backward crosstalk of light between multichannel optical connection elements.t shall be used together with EN 2591-100.

Aerospace series - Elements of electrical and optical connection; Test methods - Part 606: Optical elements; Crosstalk

EN 2591-617:2002 航空航天系列.电气和光学连接元件的试验方法.第617部分:光学元件.温度循环

This standard specifies a method of checking the ability of optical connection elements (including permanent connections) and fibre optic couplers to withstand temperature cycling.It shall be used together with EN 2591-100.

Aerospace series - Elements of electrical and optical connection; Test methods - Part 617: Optical elements; Temperature cycling

CEA-909-2002 天线控制接口

This standard was developed under the auspices of the Consumer Electronics Association (CEA) R4 Video Systems Committee.

Antenna Control Interface

EN 2591-614:2002 航空航天系列.电气和光学连接元件的试验方法.第614部分:光学元件.放射部分压缩连接件

This standard specifies a method of checking the resistance to radial compression of optical connection elements (including permanent connections) and fibre optic couplers.It shall be used together with EN 2591-100.

Aerospace series - Elements of electrical and optical connection; Test methods - Part 614: Optical elements; Connector radial compression

EN 3745-511:2002 航空航天系列.航空器用光纤和光缆的试验方法.第511部分:电缆间磨损

This standard specifies a method of measuring the resistance of an optical cable to abrasion between cables.

Aerospace series - Fibres and cables, optical, aircraft use; Test methods - Part 511: Cable-to-cable abrasion

SAE ARP711A-2002 照明标志

This Aerospace Recommended Practice (ARP) covers the general design and performance characteristics of illuminated information signs for service in the passenger compartment of passenger transport aircraft. Illuminated information sights are lighted signs used to inform occupants of the passenger compartment. Signs may use symbols or letters to convey messages. This ARP does not apply to EXIT signs which are the subject of SAE ARP 503.

Illuminated Signs

SAE AIR1608A-2002 高度测量总误差的评估

AIR1608 Estimation of total error in altimetry proposes a method of estimating overall error of altimetry in order to provide a basis for safe vertical separation of aircraft.

Estimation of Total Error in Altimetry

SAE AIR1093A-2002 飞机仪表显示器的数字,字母和符号尺寸

The purpose of this AIR is to provide recommendations for the minimum dimensions of characteris and symbols used in aircraft instrument dials and panel displays as related to the conditions stated in para. 3. Numerous variables influence the legibility of aircraft instrument dial characters. This situation makes it very difficult, if not impossible, to establish an exact act of rules for optimizing all installations. Character size, one of the important considertions, can be optimized where adequate dial space exists. UIsually this is not the case and the designer is faced with placing the information in a limited space while continuing to strive for error-free legibility. Appropriate minimum size requirements have been stated herein for guidance in air transport use.

Numeral, Letter and Symbol Dimensions for Aircraft Instrument Displays

JIS W 0814:2002 飞行器设备.机载设备的环境和工作条件.湿度、温度和压力试验

この規格は，主に民間機及び輸送航空機に適用するものであり，高湿度状態の大気中を通過し，変化する温度及び圧力並びにそれらの変化の組み合わせによって生じる湿気の浸入，結霜及び結露にさらされる可能性がある航空機用機器についての試験要求事項を規定する。

Aircraft equipment -- Environmental and operating conditions for airborne equipment -- Humidity, temperature and pressure tests

AIR FORCE QPL-9443-12-2002 MJ-2型发动机排气热电偶温度指示器

This list has been prepared for use by or for the Government in the acquisition of products covered by the subject specification and such listing of a product is not intended to and does not connote endorsement of the product by the Department of Defense.

INDICATOR, TEMPERATURE, THERMOCOUPLE, ENGINE EXHAUST, TYPE MJ-2

CEA-885-2002 汽车遥控器动装置的安全性

This standard addresses the automotive accessories that allow the operator to start a vehicle while away from the vehicle, and the safety of such devices when installed.

Remote Starter Safety

SAE AS8039A-2002 一般航空飞行记录器最低性能标准

The standards contained herein apply to recording equipment intended primarily for installation in multi-engine, turbine powered aircraft (fixed and rotary wing) for automatically recording flight data parameters and audio information. This standard is not intended for large aircraft operating under Code of Federal Regulations Title 14, Aeronautics & Space, part 121. This Aerospace Standard (AS) specifies minimum performance standards for recording automatically aircraft flight par ammeters and (or) aural communication between flight crew members, aural warning sounds, and communications to and from aircraft necessary for flight operations. It is the intent of this standard to allow for the use of individual Cockpit Voice Recorder (CVR) or Flight Data Recorder (FDR) equipment, or a combination CVR/FDR.

Minimum Performance Standard General Aviation Flight Recorder