49.140 航天系统和操作装置 标准查询与下载

ISO 23230:2023 航天系统.色漆和清漆.涂层材料和涂层的工艺、程序和要求

This document establishes the main requirements for: — a choice of coating materials and coatings for space applications; — processes and procedures for the verification of coating materials; — processes of preparation and quality control of the painted surface; — the quality control of the applied coatings. This document also describes the causes of possible defects in coatings. This document is applicable to coating materials and coatings based on them; it is intended for use by manufacturers of space systems products for various surfaces of spacecraft’s and its constitutive parts (on-board systems, facilities, tools, electronic component base products) with long active lifetimes.

Space systems — Paints and varnishes — Processes, procedures, and requirements for coating materials and coatings

22/30461482 DC BS ISO 27026 空间系统 计划管理 项目管理结构的细分

BS ISO 27026. Space systems. Programme management. Breakdown of project management structures

22/30461730 DC BS ISO 17666 空间系统 风险管理

BS ISO 17666. Space systems. Risk management

22/30461479 DC BS ISO 27025 空间系统 计划管理 质量保证要求

BS ISO 27025. Space systems. Programme management. Quality assurance requirements

22/30406196 DC BS ISO 16126 空间系统 为减缓空间碎片而设计的无人航天器对空间碎片和流星体撞击的生存能力

BS ISO 16126. Space systems. Survivability of unmanned spacecraft against space debris and meteoroid impacts for the purpose of space debris mitigation

BS EN 16603-20-07:2022 空间工程 电磁兼容

1   Scope EMC policy and general system requirements are specified in ECSS‑E‑ST‑20. This ECSS‑E‑ST‑20‑07 Standard addresses detailed system requirements (Clause 4), general test conditions, verification requirements at system level, and test methods at subsystem and equipment level (Clause 5) as well as informative limits (Annex A). Associated to this standard is ECSS‑E‑ST‑20‑06 “Spacecraft charging”, which addresses charging control and risks arising from environmental and vehicle-induced spacecraft charging when ECSS‑E‑ST‑20‑07 addresses electromagnetic effects of electrostatic discharges. Annexes A to C of the ECSS‑E‑ST‑20 standard document EMC activities related to ECSS‑E‑ST‑20‑07: the EMC Control Plan (Annex A) defines the approach, methods, procedures, resources, and organization, the Electromagnetic Effects Verification Plan (Annex B) defines and specifies the verification processes, analyses and tests, and the Electromagnetic Effects Verification Report (Annex C) document verification results. The EMEVP and the EMEVR are the vehicles for tailoring this standard. This standard may be tailored for the specific characteristic and constrains of a space project in conformance with ECSS‑S‑ST‑00‑02.

Space engineering. Electromagnetic compatibility

22/30431878 DC BS ISO 5879 空间系统 运载火箭/航天器分离联合分离试验、水平分离试验和单独落下分离试验的地面试验要求

BS ISO 5879. Space systems. Launch vehicle/spacecraft separation ground test requirements for combined separation test, horizontal separation test and individual falling separation test

T/GDC 197-2022 海上巡航无人机阻截设备

海上巡航无人机阻截设备的术语和定义、总体要求、系统实现、技术要求、测试方法、标志。

Intercepting equipment for maritime cruise UAV

BS ISO 15388:2022 空间系统 污染和清洁度控制

1   Scope This document establishes general requirements for contamination and cleanliness control that are applicable, at all tiers of supply, to the development of space systems, including ground processing facilities, ground support equipment , launch vehicles, spacecraft, payloads, and ground processing and on-orbit operations. It also provides guidelines for the establishment of a contamination and cleanliness control programme.

Space systems. Contamination and cleanliness control

BS ISO 22010:2022 空间系统 质量特性控制

1   Scope This document describes a process for managing, controlling and monitoring the mass properties of space systems . The relationship between this management plan and the performance parameters for mass properties to be met throughout the mission is described. Ground handling, dynamics analysis and test set-ups that rely on accurate mass properties inputs are identified. This document covers all programme phases from pre-proposal through to end of life.

Space systems. Mass properties control

ISO 24564:2022 航天系统.粘合剂.一般要求

This document specifies general requirements for adhesive selection with the adhesive bonding process and quality assurance used in space s ystems. This document can be applied to different types of adhesive materials in space s ys tems, such as launch vehicles, satellites, spacecraft and space s tation for the following applications: bonding, components embedding (only for space application) , sealing, fi xing and repairing.

Space systems — Adhesives — General requirements

ISO 22010:2022 航天系统.质量特性控制

This document describes a process for managing, controlling and monitoring the mass properties of space s ys tems. The relationship between this management plan and the performance parameters for mass properties to be met throughout the mission is described. Ground handling, dynamics analysis and test set-ups that rely on accurate mass properties inputs are identified. This document covers all programme phases from pre-proposal through to end of life.

Space systems — Mass properties control

T/GDC 174-2022 无人值守智能无人机机场

无人值守智能无人机机场的产品结构及功能要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存。

Unattended intelligent UAV Airport

T/GDC 175-2022 便携式系留无人机照明装备

便携式系留无人机照明装备的产品结构及功能要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存。

Portable tethered UAV lighting equipment

T/GDC 173-2022 无人值守智能机场专用无人机

无人值守智能机场专用无人机的系统组成、技术要求、试验方法、检验规则、标志、包装、运输、贮存

Unmanned intelligent airport dedicated UAV

T/GDC 176-2022 应急系留车载无人机机场及无人机装备

应急系留车载无人机机场及无人机装备的产品结构及功能要求、技术要求、试验方法、检验规则、标志、包装、运输、贮存。

Emergency mooring of on-board UAV airport and UAV equipment

T/GDC 177-2022 应急用无人机地空一体远程调度综合管理系统

应急用无人机地空一体远程调度综合管理系统总则、机场控制、任务执行情况、无人机控制、数据管理、任务数据记录、设备管理、主要功能要求。

Ground air integrated remote dispatching integrated management system for emergency UAV

T/GDC 178-2022 水务用无人机地空一体远程调度综合管理系统

水务用无人机地空一体远程调度综合管理系统的总则、机场控制、任务执行情况、无人机控制、数据管理、任务数据记录、设备管理、主要功能要求。

Integrated dispatching and management system of land and air for remote water affairs

BS ISO 16378:2022 空间系统 热控材料热光特性的测量

1   Scope This document specifies the multiple measurement methods, instruments, equipment, and samples used to calculate the thermo-optical properties of thermal control materials. This document compares their features, indicates their limitations and biases, and guides the applications. This document also defines requirements for calibration and reference materials to ensure data quality. This document specifies the following test methods, including the configuration of samples and calculations. a) Solar absorptance using a spectrophotometer ( α s ) — Annex A. b) Solar absorptance using the comparative test method ( α p ) — Annex B. c) Hemispherical infrared emittance using the thermal test method ( ε h-t ) — Annex C. d) Normal infrared emittance using an IR spectrometer ( ε n-s ) — Annex D. e) Normal infrared emittance using ellipsoid collector optics ( ε n-e ) — Annex E.

Space systems. Measurements of thermo-optical properties of thermal control materials

BS ISO 15865:2022 空间系统 资格评估

1   Scope This document establishes general rules for qualification assessment of space systems and products used in space systems against their functional and technical specifications . It establishes general requirements for determining system or product readiness for any stage of the life cycle. This includes, for example, readiness for development, manufacture, test, operation, modification, or disposal. This document is applicable to systems and products used in flight or ground support and to products at all levels in a product tree. It applies to systems and products consisting of hardware, software, facilities, materials, methods, processes, procedures or any combination of these. It establishes common: a) general requirements for qualification assessment of item readiness; b) approaches to qualification. This document is intended for use as the basis for a design justification plan. It is intended to be used either in establishing an agreement for such a plan between a customer and a supplier or as the basis for a supplier’s internal qualification practices.

Space systems. Qualification assessment