共找到 2088 条与 起重机 相关的标准,共 140 页
本标准规定了冶金起重机的专用名词术语。与其他起重机械通用的名词术语见相应的标准。
Lifting appliances--Vocabulary--Metallurgy cranes
本标准规定了集装箱起重机的专用名词术语。与其他起重机械通用的名词术语见相应的有关标准。
Lifting appliances--Vocabulary--Container cranes
本标准规定了悬挂单轨系统的专用名词术语。与其他起重机械通用的名词术语见相应的标准。
Lifting appliances--Vocabulary--Underslung monorail systems
本标准规定了检验起重机是否符合其工作性能参数和技术要求以及是否能够起升额定载荷所应遵循的试验及程序。对额定载荷取决于稳定性的起重机,还规定了用来检验稳定性的试验程序和试验载荷。 本标准适用于下列起重机: a.桥式起重机; b.装卸桥和门式起重机; c.门座起重机; d.流动式起重机; e.塔式起重机; f.铁路起重机; g.缆索起重机; h.本标准适用的其他起重机。
Cranes--Test code and procedures
汽车起重机和轮胎起重机试验规范 合格试验
Test code for truck crane and mobile crane--Conformity test
本标准规定了汽车起重机和轮胎起重机(简称为起重机)的试验内容、抽样方法和试验条件。
Test code for truck crane and mobile crane--General requirements
本试验的目的是对产品的结构件进行强度和刚度的测定,以确定结构件是否满足起重性能和工作要求。
Test code for truck crane and mobile crane--Structure test
本标准规定汽车起重机和轮胎起重机的稳定性计算方法、试验方法和试验条件。
Test code for truck crane and mobile crane--Determination of stability
本规程适用于:桥式起重机(包括冶金起重机)、门式起重机、装卸桥、缆索起重机、汽车起重机、轮胎起重机、履带起重机、铁路起重机、塔式起重机、门座起重机、桅杆起重机、升降机、电葫芦及简易起重设备和辅具。 本规程不适用于:浮式起重机、矿山井下提升设备、载人起重设备。
Safety rules for lifting appliances
本规范适用于电力驱动的桥式起重机、门式起重机、装卸桥、门座起重机、塔式起重机、浮式起重机、以电动葫芦为起升机构的起重机以及甲板起重机、履带起重机、轮胎起重机、汽车起重机和缆索起重机。 注:浮式起重机、甲板起重机尚应满足我国有关船用规范要求。
Design rules for cranes
4 一般要求 5 4.1 通则 5 4.2 再制造流程 6 4.3 再制造设计 6 4.4 再制造产品的质量要求 7 4.5 金属结构件的再制造 7 4.6 机构的再制造 7 4.7 电气系统的再制造 8 4.8 液压系统的再制造 8 4.9 安全保护装置的再制造 8 5 再制造性评估 8 5.1 要求 8 5.2 参数选择 9 5.3 指标要求 9 5.4 指标内容 9 5.5 定性评估 9 5.6 定量评估 10 5.7 定量评估流程 10 5.8 评估结果使用 10 6 再制造技术与过程要求 11 6.1 拆解 11 6.2 清洗 11 6.3 分类 12 6.4 修复 12 6.5 涂装 13 6.6 装配 14 7 标识 15 7.1 要求 15 7.2 标识方式 15 8 出厂验收 16 8.1 要求 16 8.2 外观验收 16 8.3 性能验收 16 8.4 标识验收 16 8.5 出厂文件验收 16 8.6 包装验收 16
Remanufacturing technical regulations for tower cranes
BS EN 14238 Cranes - Manually controlled load manipulators
Draft BS 7121-2-4. Safe use of cranes - Part 2-4. Inspection, maintenance and thorough examination of loader cranes. Code of practice
BS ISO 4301-5 Cranes — Classification - Part 5: Bridge and gantry cranes
BS ISO 10972-1 Cranes - Requirements for mechanisms - Part 1: General
Cranes. Control devices and control stations
Technical requirements for assembly of insulating components of insulated crane trolleys
Technical requirements for explosion-proof grabs for cranes
Design Guide for Planetary Mechanism Overhead Cranes
This document applies to hydraulic cylinders that are part of the load carrying structure of cranes. It is intended to be used together with the ISO 8686 series and ISO 20332, and as such they specify general conditions, requirements and methods to prevent mechanical hazards of hydraulic cylinders, by design and theoretical verification. This document does not apply to hydraulic piping, hoses, connectors and valves used with the cylinders, or cylinders made from other material than (carbon) steel.
Proof of competence of hydraulic cylinders in crane applications
Copyright ©2007-2022 ANTPEDIA, All Rights Reserved
京ICP备07018254号 京公网安备1101085018 电信与信息服务业务经营许可证:京ICP证110310号