53.020.20 起重机 标准查询与下载
共找到 2099 条与 起重机 相关的标准，共 140 页
本文件规定了桥式起重机过轨的术语和定义、型式、技术要求等内容。 本文件适用于在一般工作环境中有过轨要求的起重机，其取物装置为多为吊钩。 本文件不适用于下列条件下的起重机： ——有爆炸性气体、可燃性粉尘及腐蚀性气体环境； ——核辐射环境、有毒气体环境； ——吊运熔融金属、易燃和易爆物品。
Overhead crane technical requirements
- ICS
- 53.020.20
- CCS
- C343
- 发布
- 2021-10-14
- 实施
- 2021-12-30
本文件规定了船用桥式起重机(以下简称起重机)的术语和定义、基本参数、技术要求、试验方法、检测规则及标志、包装、运输。 本文件适用于安装于船上的桥式起重机。 本文件不适用于在下列环境中工作的起重机： ——易燃易爆、可燃性粉尘、可燃性气体及腐蚀性气体（盐雾除外）环境； ——核辐射、有毒气体环境； ——吊运熔融或炽热金属的环境。
Marine bridge crane
- ICS
- 53.020.20
- CCS
- C343
- 发布
- 2021-10-14
- 实施
- 2021-12-30
Cranes -- General design -- Part 3-5: Limit states and proof of competence of forged and cast hooks
- ICS
- 53.020.20
- CCS
- 发布
- 2021-10-14
- 实施
- 2021-10-14
Cranes - Light crane systems
- ICS
- 53.020.20
- CCS
- 发布
- 2021-10-01
- 实施
- 2021-10-01
This European Standard applies to bridge and gantry cranes able to travel by wheels on rails, runways or roadway surfaces, and to gantry cranes without wheels mounted in a stationary position. This European Standard specifies requirements for all significant hazards, hazardous si
Cranes - Bridge and gantry cranes; German version EN 15011:2020
- ICS
- 53.020.20
- CCS
- 发布
- 2021-10-00
- 实施
Volume B30.18 includes provisions that apply to the construction, installation, operation, inspection, and maintenance of hand-powered and power-driven overhead and gantry cranes that have a top or under running multiple girder bridge with a vertically guided carriage, with or without a top or under running trolley. The requirements included in this Volume also apply to stacker cranes having the same fundamental characteristics, such as cantilever gantry and semigantry stacker cranes. B30.18卷包括适用于手动和动力驱动的桥式和龙门起重机的建造、安装、操作、检查和维护的规定，这些起重机具有顶部或下方运行的多梁桥，带有垂直导向的滑块，有或没有顶部或下方运行的小车。本卷中包含的要求也适用于具有相同基本特性的堆垛机，例如悬臂式龙门起重机和半龙门式堆垛机。
Stacker Cranes (Top or Under Running Bridge, Multiple Girder With Top or Under Running Trolley Hoist)
- ICS
- 53.020.20
- CCS
- J80
- 发布
- 2021-09-30
- 实施
- 2021-09-30
Crane safety - General design - Part 2: Load actions
- ICS
- 53.020.20
- CCS
- 发布
- 2021-09-15
- 实施
- 2021-09-15
Cranes - Bridge and gantry cranes
- ICS
- 53.020.20
- CCS
- 发布
- 2021-09-15
- 实施
- 2021-09-15
Safety Inspection Regulations for Metallurgical Cranes
- ICS
- 53.020.20
- CCS
- J 08
- 发布
- 2021-09-03
- 实施
- 2021-10-03
本文件规定了公路桥梁建设用桁架门式起重机（以下简称门机）的型式分类与基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装、运输及贮存和质量承诺。 本文件适用于额定起重量不超过320 吨的公路桥梁建设用桁架门式起重机。
Truss gantry crane for road-bridge construction
- ICS
- 53.020.20
- CCS
- C351
- 发布
- 2021-09-01
- 实施
- 2021-09-18
Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes
- ICS
- 53.020.20
- CCS
- 发布
- 2021-09-00
- 实施
BS EN 14439. Cranes. Tower cranes
- ICS
- 53.020.20
- CCS
- 发布
- 2021-08-12
- 实施
- 2021-08-12
Crane safety -- General design -- Part 2: Load actions
- ICS
- 53.020.20
- CCS
- 发布
- 2021-08-11
- 实施
- 2021-08-11
Tower cranes - Anti-collision systems - Safety requirements
- ICS
- 53.020.20
- CCS
- 发布
- 2021-07-22
- 实施
- 2021-07-22
ISO 4301-1:2016 establishes a general classification of cranes and mechanisms based on the service conditions, mainly expressed by the following: - the total number of working cycles to be carried out during the specified design life of the crane; - the load spectrum factor which represents the relative frequencies of loads to be handled; - the average displacements.
Cranes — Classification — Part 1: General
- ICS
- 53.020.20
- CCS
- 发布
- 2021-07-01
- 实施
ISO 11031:2016 establishes general methods for calculating seismic loads to be used as defined in the ISO 8686 series and for proof of competence as defined in ISO 20332, for the structure and mechanical components of cranes as defined in ISO 4306. ISO 11031:2016 evaluates dynamic response behaviour of a crane subjected to seismic excitation as a function of the dynamic characteristics of the crane and of its supporting structure. The evaluation takes into account dynamic effects both of regional seismic conditions and of the local conditions on the surface of the ground at the crane location. The operational conditions of the crane and the risks resulting from seismic damage to the crane are also taken into account. It is restricted to the serviceability limit state (SLS), maintaining stresses within the elastic range in accordance with ISO 20332. It does not extend to proofs of competence which include plastic deformations. When these are permitted by agreement between crane supplier and customer, other standards or relevant literature taking them into account can be used.
Cranes — Principles for seismically resistant design
- ICS
- 53.020.20
- CCS
- 发布
- 2021-07-01
- 实施
ISO 4305:2014 specifies the conditions to be taken into consideration when verifying the stability of a mobile crane by calculation, assuming that the crane is operating on a firm and level surface (up to 1 % gradient). It applies to mobile cranes as defined in ISO 4306-2, i.e. appliances mounted on wheels (tires) or crawlers, with or without outriggers with the exception of loader cranes.
Mobile cranes — Determination of stability
- ICS
- 53.020.20
- CCS
- 发布
- 2021-07-01
- 实施
