53.020.30 起重设备附件 标准查询与下载

DIN EN 1492-2:2009 织物吊索 安全性 第2部分:通用人造纤维制圆吊索

This European Standard specifies the requirements related to safety, including methods of rating and testing roundslings up to 40 tonnes working load limit (in straight lift) and two-, three-, and four-leg roundsling assemblies, with or without fittings, made of polyamide, polyester and polypropylene. The roundslings covered by this Part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or WLL's specified. Lifting operations not covered by this standard include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply. Roundslings conforming to this European Standard are suitable for use and storage in the following temperature ranges: a) polyester and polyamide: -40~C to 100~C, b) polypropylene: -40~C to 80~C This European Standard does not apply to the types of roundsling indicated below: a) roundslings designed for securing or lashing of cargoes to each other on pallets and platforms or in vehicles; b) slings of tubular webbing without filling. This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of roundslings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use (includes Amendment A1:2008); English version of DIN EN 1492-2:2009-05

DIN EN 1492-1:2009 纺织吊索.安全性.第1部分:通用人造纤维织造的平机织带状吊索

This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless sewn flat woven webbing slings, with or without fittings, made of polyamide, polyester and polypropylene man-made fibre webbing in the width range of 25 mm to 450 mm inclusive. The flat woven webbing slings covered by this Part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by this standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply. Flat woven webbing slings conforming to this European Standard are suitable for use and storage in the following temperature ranges: a) polyester and polyamide-40~C to 100~C, b) polypropylene-40~C to 80~C This European Standard does not apply to the types of webbing sling indicated below: a) slings such as bag slings, nets (consisting of several crossed webbings stitched together), 'adjustable' slings (containing, for example, intermediate buckles stitched along the webbing), etc.; b) slings made from webbing woven from monofilament yarns; c) slings designed for pre-slinging and intended not to be re-used; This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of flat woven webbing slings when carried out in accordance with the instructions and specifications given by the manufacturer or authorized representative.

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use (includes Amendment A1:2008); English version of DIN EN 1492-1:2009-05

BS ISO 16872:2008 提升用短环节链.等级VH、手动节链用精细公差

Short link chains for lifting purposes - Grade VH, fine tolerance for manually operated chain hoists

BS ISO 16872:2009 提升用短环节链 等级VH、手动节链用精细公差

Short link chains for lifting purposes. Grade VH, fine tolerance for manually operated chain hoists

DS/EN 13411-2+A1:2009 钢丝绳的端接 安全 第2部分：钢丝绳吊索眼的拼接

This standard specifies minimum requirements for the splicing of eye terminations for six or eight strand steel wire ropes of up to 60 mm diameter complying with prEN 12385-4 used for slings to ensure that the spliced eye is strong enough to withstand a force of at least 80 % of the minimum breaking load of the rope.Other hazards covered by this standard are identified in clause 4. Resistance to fatigue loading is not considered to be a significant hazard for slings and is not covered by this standard.

Terminations for steel wire ropes - Safety - Part 2: Splicing of eyes for wire rope slings

DS/EN 13411-1+A1:2009 钢丝绳的端头 安全 第1部分：钢丝绳吊索的顶针

This European Standard specifies the minimum requirements for non welded general purpose steel thimbles produced from plate having dimensions in accordance with Figure 1. The thimbles are intended to be used in slings made with six or eight strand steel wire ropes from 8 mm to 60 mm diameter complying with EN 12385-4.Reeving thimbles and solid thimbles are not covered by this standard.The hazards covered by this standard are identified in clause 4.

Terminations for steel wire ropes - Safety - Part 1: Thimbles for steel wire rope slings

DS/EN 13411-5+A1:2009 钢丝绳的端接 安全 第5部分：U 型螺栓钢丝绳夹具

This European Standard has been prepared to provide a means of conforming with the essential safety requirements of the Machinery Directive and associated EFTA Regulations.Purchasers ordering to this standard are advised to specify in their purchasing contract that the supplier operates a quality assurance system applicable to the relevant part of this standard (e.g. EN ISO 9001) to ensure themselves that products claimed to comply consistently achieve the required level of quality.

Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips

DS/EN 13411-3+A1:2009 钢丝绳端接 安全 第3部分：套圈和套圈固定

This European Standard deals with the requirements for the ferrule-securing of eyes and endless loops.It also deals with the requirements for ferrules for the ferrule-securing of eyes and endless loops.This European Standard applies to the ferrule-securing of eye terminations formed either by a Flemish eye or turn-back eye and covers ferrules made of non alloy carbon steel and aluminium.This European Standard applies to slings and assemblies using steel wire ropes for general lifting applications up to and including 60mm diameter conforming to EN 12385-4, lift ropes conforming to EN 12385-5 and spiral strand ropes conforming to EN 12385-10.Type testing of f

Terminations for steel wire ropes - Safety - Part 3: Ferrules and ferrule-securing

DS/EN 13411-6+A1:2009 钢丝绳的终端 安全 第6部分：不对称楔形插座

This European Standard specifies the minimum requirements, for asymmetrical wedge socket terminations for stranded steel wire ropes.Examples of the construction and sizes of two separate designs of asymmetric wedge sockets are given in informative annexes A and B.The informative annex C gives recommendations for safe use and inspection.This European Standard deals with all significant hazards, hazardous situations and events relevant to asymmetric wedge sockets for terminations for steel wire ropes, when used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.This standard applies to terminations of steel wire ro

Terminations for steel wire ropes - Safety - Part 6: Asymmetric wedge socket

DS/EN 13411-7+A1:2009 钢丝绳的端接 安全 第7部分：对称楔形插座

This European Standard specifies the minimum requirements for symmetrical wedge socket terminations for stranded steel wire ropes conforming to EN 12385-5 for lifts.This European Standard covers those symmetric wedge sockets intended for use at temperatures between -20 °C and 100 °C.This European Standard only covers those symmetric wedge sockets that have welded socket bodies.An example of the construction and sizes of a symmetric wedge socket is given in informative Annex A.The informative Annex B gives the recommendations for the safe use and inspection of symmetric wedge socket according to Annex A.This European Standard deals with all significant hazar

Terminations for steel wire ropes - Safety - Part 7: Symmetric wedge socket

LST EN 1492-4-2004+A1-2009 纺织吊索 安全 第4部分：由天然和人造纤维绳索制成的用于一般服务的起重吊索

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes

LST EN 1492-2-2002+A1-2009 纺织吊索 安全 第2部分：一般用途的人造纤维圆形吊索

Textile slings - Safety - Part 2: Roundslings made of man-made fibres for general purpose use

LST EN 13414-3+AC-2004+A1-2009 钢丝绳吊索 安全 第3部分：索环和电缆敷设吊索

Steel wire rope slings - Safety - Part 3: Grommets and cable-laid slings

LST EN 1677-4-2002+A1-2009 吊索部件 安全 第4部分：链节，8 级

Components for slings - Safety - Part 4: Links, Grade 8

LST EN 1677-5-2002+A1-2009 吊索部件 安全 第5部分：带闩锁的锻钢吊钩 4 级

Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4

LST EN 1677-6-2002+A1-2009 吊索部件 安全 第6部分：链节 4 级

Components for slings - Safety - Part 6: Links - Grade 4

LST EN 13889-2004+A1-2009 一般起重用途的锻钢卸扣 Dee 卸扣和弓形卸扣 6 级 安全

Forged steel shackles for general lifting purposes - Dee shackles and bow shackles - Grade 6 - Safety

LST EN 1677-1-2002+A1-2009 吊索部件 安全 第1部分：锻钢部件，8 级

Components for slings - Safety - Part 1: Forged steel components, Grade 8

LST EN 1492-1-2002+A1-2009 纺织吊索 安全 第1部分：一般用途的人造纤维平织吊索

Textile slings - Safety - Part 1: Flat woven webbing slings made of man-made fibres for general purpose use

DIN EN 1677-5:2009 吊索用部件.安全性.第5部分:带闩锁的锻制钢提升钩.4级

This Part of EN 1677 specifies requirements for forged steel lifting hooks of grade 4 having latch and eye up to 31,5 t WLL, mainly for use in: -- chain slings according to EN 818-5 -- steel wire rope slings according to prEN 13414-1:1998 -- textile slings according to EN 1492-1, EN 1492-2. intended for lifting objects, materials or goods. This Part of EN 1677 does not apply to hand forged hooks. The hazards covered by this Part of EN 1677 are identified in clause 4. Annex A gives the bases for calculation of hook dimensions. Annex B gives an example of a designation system for hooks of grade 4.

Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4 ; German version EN 1677-5:2000+A1:2008