53.020.30 起重设备附件 标准查询与下载

NF E52-037-1*NF EN 1677-1+A1:2009 吊链部件.安全性.第1部分:锻制钢元件.8级

Components for slings - Safety - Part 1 : forged steel components - Grade 8.

NF A47-270-3/IN1*NF EN 13414-3/IN1:2009 钢丝绳吊索.安全性.第3部分:索环和缆绳吊索

Steel wire rope slings - Safety - Part 3 : grommets and cable-laid slings.

NF G36-030-1*NF EN 1492-1+A1:2009 纺织吊索.安全性.第1部分:通用人造纤维制扁平机织带状吊索

Textile slings - Safety - Part 1 : flat woven webbing slings made of man-made fibres for general purpose use.

DIN EN 818-7 Berichtigung 1:2009 升降用短节链条.安全性.第7部分:T级(T型、DAT型和DT型)精密公差吊链.技术勘误DIN EN 818-7-2008

Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT); German version EN 818-7:2002+A1:2008, Corrigendum to DIN EN 818-7:2008-07

DIN EN 1677-2 Berichtigung 1:2009 吊索部件.安全性.第2部分:8级锻钢制带卡齿起重吊钩.技术勘误DIN EN 1677-2-2008

Components for slings - Safety - Part 2: Forged steel lifting hooks with latch, Grade 8; German version EN 1677-2:2000+A1:2008, Corrigendum to DIN EN 1677-2:2008-06

DIN EN 1677-3 Berichtigung 1:2009 吊索部件.安全性.第3部分:8级、锻钢自锁紧吊钩.技术勘误DIN EN 1677-3-2008

Components for slings - Safety - Part 3: Forged steel self-locking hooks, Grade 8; German version EN 1677-3:2001+A1:2008, Corrigendum to DIN EN 1677-3:2008-06

ASME B30.10-2009 挂钩

B30.10 includes provisions that apply to the fabrication, attachment, use, inspection, and maintenance of hooks used for lifting and load handling purposes, in conjunction with equipment described in other volumes of the B30 Standard. Hooks supporting a load in the base (bowl/saddle or pin hole) of the hook, are covered in Chapter 10-1. Hooks that may be loaded in other than the base (bowl/saddle or pin hole)are covered in Chapter 10-2.

Hooks

DS/EN 13414-2+A2:2008 钢丝绳索具 安全 第2部分：制造商提供的使用和维护信息规范

This Part of EN 13414 specifies the information on use and maintenance to be provided by the manufacturer of wire rope slings.NOTE Certain clauses are relevant to component parts and accessories conforming to EN 1677 parts 1 to 6Annex A is informative, and provides some of the detailed information for use and maintenance which may be appropriate for general lifting service.The hazards covered by this Part of EN13414 are identified in clause 4.

Steel wire rope slings - Safety - Part 2: Specification for information for use and maintenance to be provided by the manufacturer

DS/EN 13414-1+A2:2008 钢丝绳吊索 安全 第1部分：一般起重服务用吊索

This European Standard specifies the construction requirements, calculation of WLL, verification, certification and marking of steel wire rope slings for general lifting service. It covers single-, two-, three- and four-leg slings, with ferrule-secured or spliced eye terminations and spliced or ferrule-secured endless slings made from 8 mm to 60 mm diameter 6 strand ordinary lay steel wire rope with fibre or steel core and 8 strand ordinary lay steel wire rope with a steel core conforming to EN 12385-4. The standard assumes a working coefficient (factor of safety) of five.This standard does not cover slings for single use, i.e. one trip slings, having a wor

Steel wire rope slings - Safety - Part 1: Slings for general lifting service

DIN EN 818-1:2008 起重用短环节链.安全性.第1部分:一般验收条件(包含修改件A1-2008).英文版本DIN EN 818-1-2008

This part of EN 818 specifies the general conditions of acceptance related to safety for electrically welded round steel short link chain for lifting purposes. It includes: a) medium tolerance chain for use in chain slings and for general lifting service and; b) fine tolerance chain for use with hoists and other similar lifting appliances. The hazards covered by this Part of EN 818 are identified in clause 4. Annex C gives proposals for clauses covering inspection, inspection marking and steel makers cast analysis which may be included in a form of contract.

Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance(includes Amendment A1:2008); English version of DIN EN 818-1:2008-12

DIN EN 818-2:2008 起重用短环节链.安全性.第2部分:链式吊索用中等公差链.等级8.德文版本EN 818-2-1996+A1-2008

This part of EN 818 specifies the requirements related to safety for short link chains, grade 8, of medium tolerance for use in chain slings according to EN 818-4:1996+A1 and for general lifting purposes. They are electrically welded round steel short link chains, heat treated and tested and complying with the general conditions of acceptance in EN 818-1:1996+A1 . The range of nominal sizes of chain covered by this Part of EN 818 is from 4 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. The bases for calculation of tabulated values for dimensions, working load limits and mechanical properties are given in annex A. Annex B gives information on weight/metre of chain. Annex C gives an example of a designation system for chains.

Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8; German version EN 818-2:1996+A1:2008

DIN EN 818-4:2008 起重用短环节链.安全性.第4部分:链式吊索.等级8(包含修改件A1-2008).英文版本DIN EN 818-4-2008

This European Standard specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings assembled by: a) mechanical joining devices; b) welding using short link grade 8 medium tolerance lifting chain conforming to EN 818-2 together with the appropriate range 'of components of the same grade. deleted text The hazards covered by this European Standard are identified in clause 4. Bases for the calculation of working load limits are given in annex B. Annex C gives an example of a designation system for chain slings.

Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 (includes Amendment A1:2008); English version of DIN EN 818-4:2008-12

DIN EN 818-6:2008 起重用短环节链.安全性.第6部分:链式吊索.生产商提供的用于使用和维修的信息规范(包含修改件A1-2008).英文版本DIN EN 818-6-2008

This Part of EN 818 specifies the information on use and maintenance to be provided by the manufacturer with chain slings conforming to EN 818-4:1996+A1 and EN 818-5:1999+A1. NOTE Certain clauses are relevant to component parts of chains and accessories conforming to EN 818-2:1996+A1 ,EN 818-3:1999+A1 and EN 1677. Annex A is informative, and provides some of the detailed information for use and maintenance which may be appropriate. The hazards covered by this Part of EN 818 are identified in clause 4.

Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer(includes Amendment A1:2008); English version of DIN EN 818-6:2008-12

DIN EN 818-3:2008 起重用短环节链.安全性.第3部分:链式吊索的中等公差.等级4(包含修改件A1-2008).英文版本DIN EN 818-3-2008

This part of EN 818 specifies the requirements related to safety for short link chains, grade 4, of medium tolerance for use in chain slings to EN 818-4:1996+A1 and for general lifting purposes. The standard is applicable to electrically welded round steel short link chains, conforming to EN 818-1:1996+A1 , which are intended for lifting objects, materials or goods. The range of nominal sizes of chain covered by this Part of EN 818 is from 7 mm to 45 mm. The hazards covered by this Part of EN 818 are identified in clause 4. Annex A contains the bases for calculation of tabulated values for dimensions, working load limits and mechanical properties. Annex B gives information on the mass/metre of chain. Annex C gives an example of a designation system for chains of grade 4. Annex ZA gives the relationship with EU Directives.

Short link chain for lifting purposes - Safety - Part 3: Medium tolerance chain for chain slings - Grade 4(includes Amendment A1:2008); English version of DIN EN 818-3:2008-12

DIN EN 818-5:2008 起重用短环节链.安全性.第5部分:链式吊索.等级4(包含修改件A1-2008).英文版本DIN EN 818-5-2008

This Part of EN 818 specifies the requirements related to safety, methods of rating and testing of single-, two-, three-, four-leg and endless chain slings, assembled by welding, using short link grade 4 medium tolerance chain conforming to EN 818-3:1999+A1 together with the appropriate range of components of the same grade in accordance with EN 1677-5:2001+A1 and -6:2001+A1. These chain slings are intended for lifting objects, materials or goods. NOTE Instructions for use and maintenance of chain slings are covered by EN 818-6:2000+A1. The hazards covered by this Part of the standard are identified in clause 4. Annex A gives an alternative method of rating and marking a chain sling for a specific lifting application. Annex B contains the bases for calculation of working load limits. Annex C gives an example of a designation system for chain slings. Annex D gives an example of identification tags for chain slings. Annexes ZA and ZB give the relationship with EU Directives.

Short link chain for lifting purposes - Safety - Part 5: Chain slings - Grade 4 (includes Amendment A1:2008);English version of DIN EN 818-5:2008-12

EN 1677-5:2001+A1:2008 吊重装置组件.安全.第5部分:带闭锁的锻钢起吊挂钩,4级 包含修改件A1,2008

This Part of EN 1677 specifies requirements for forged steel lifting hooks of grade 4 having latch and eye up to 31,5 t WLL, mainly for use in: - chain slings according to EN 818-5 - steel wire rope slings according to prEN 13414-1:1998 - textile slings according to EN 1492-1, EN 1492-2. intended for lifting objects, materials or goods. This Part of EN 1677 does not apply to hand forged hooks. The hazards covered by this Part of EN 1677 are identified in clause 4. Annex A gives the bases for calculation of hook dimensions. Annex B gives an example of a designation system for hooks of grade 4.

Components for slings - Safety - Part 5: Forged steel lifting hooks with latch - Grade 4

NF E26-002:2008 起重用短环节链.手动节链起重机用VH等级、精细公差

Short link chains for lifting purposes - Grade VH, fine tolerance for manually operated chain hoists.

EN 1492-4:2004+A1:2008 纺织吊索.安全.第3部分:专为一般服务的自然和人造纤维制成的提升吊绳绳索

This European Standard specifies the requirements related to safety, including methods of rating and testing single-, two-, three-, four-leg and endless slings, with or without fittings, made of sisal, hemp and manila 3and 4-strand laid construction natural fibre ropes and polyamide, polyester and polypropylene 3- and 4-strand laid construction and 8-strand plaited construction man-made fibre ropes having a reference number in the range of 16 to 48 inclusive. The fibre rope slings covered by this part of EN 1492 are intended for general purpose lifting operations, i.e. when used for lifting objects, materials or goods which require no deviations from the requirements, safety factors or working load limits specified. Lifting operations not covered by this standard would include the lifting of persons, potentially dangerous materials such as molten metal and acids, glass sheets, fissile materials, nuclear reactors and where special conditions apply. Fibre rope slings conforming to this European Standard are suitable for use and storage in the following temperature ranges: a) polyester and polyamide -40°C to 100°C, b) manila, sisal, hemp and polypropylene -40°C to 80°C. This European Standard does not apply to fibre rope sling assemblies rated by the trigonometric method. This European Standard deals with the technical requirements to minimize the hazards listed in clause 4 which can arise during the use of fibre rope slings when carried out in accordance with the instructions and specification given by the manufacturer or authorized representative.

Textile slings - Safety - Part 4: Lifting slings for general service made from natural and man-made fibre ropes

EN 1677-1:2000+A1:2008 吊索部件.安全.第1部分锻钢元件,8级

This Part of EN 1677 specifies general requirements for forged steel components of grade 8 up to 63 t WLL, mainly for use in: chain slings according to EN 818-4; steel wire rope slings according to prEN 13414-1:1999; textile slings according to EN 1492-1:2000, EN 1492-2:2000 intended for lifting objects, materials or goods. This standard does not apply to hand forged components and welded links, nor to other welded components. The hazards covered by this Part of EN 1677 are identified in clause 4. Annex A is informative, and gives the bases for calculation of tabulated values of mechanical properties. Annex B is informative, and gives an example of a designation system for forged steel lifting components of grade 8. Annexes ZA and ZB give the relationship with EU-Directives.

Components for slings - Safety - Part 1: Forged steel components, Grade 8

EN 1677-4:2000+A1:2008 吊索部件.安全.第4部分:铰链,8级

This part of EN 1677 specifies requirements for forged or welded steel master links, intermediate master links, master link assemblies and lower terminal links of grade 8 up to 132 t WLL, mainly for use in: chain slings according to EN 818-4 steel wire rope slings textile slings according to EN 1492-1:2000, EN 1492-2:2000, intended for lifting objects, materials or goods. This Part of EN 1677 does not apply to hand forged links. The hazards covered by this Part of EN 1677 are identified in clause 4. Annexes ZA and ZB give the relationship with EU-Directives.

Components for slings - Safety - Part 4: Links, Grade 8